journal article·2016-04

Properties Evaluation and Studying Production Mechanism of Nanocrystalline NiAl Intermetallic Compound by Mechanical Alloying

Ali Khajesarvi, Golamhossein Akbari

Publisher page

Abstract

Ni50Al50 intermetallic compound was synthesized by mechanical alloying (MA) of elemental mixtures of Ni and Al powders in a planetary ball mill. After 16 hours of milling and obtaining crystallites with a critical size, the initial NiAl compound was formed along with the combustive reaction after opening the vial lid. In the time interval of 16 to 128 hours, the reaction from combustive state reached the explosive state. Finally, after 128 hours of milling, the initial powders were wholly transformed into NiAl before completion of the milling time. Structural changes of powder particles during MA were studied by X-ray diffractometry and scanning electron microscopy. The crystallite size measurements revealed that the grain size of the NiAl phase decreased from 155 to 26 nm with increasing MA time from 8 to 128 hours. Microhardness for nanocrystalline Ni50Al50 intermetallic compound produced after 128 hours of milling was measured as about 350 Hv.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. T. Chen, J.M. Hampikian and N.N. Thadhani: Acta Mater., 1999, vol. 47, pp. 2567–2579.10.1016/S1359-6454(99)00059-2 ↗
2. C. Sierra and A. Vázquez: Solar Energy Materials and Solar Cells., 2005, vol. 86, pp. 33-42.10.1016/j.solmat.2004.06.003 ↗
3. E. Schulson, N. Stoloff, and V. Sikka: Physical Metallurgy and Processing of Intermetallic Compounds., Springer, New York, 1996, pp. 56-94.10.1007/978-1-4613-1215-4_3 ↗
4. S. Moussa and M.S. El-Shall: Alloys Compd., 2007, vol. 440, pp. 178-188.10.1016/j.jallcom.2006.09.049 ↗
5. R. Dunlap, D. Small, G. MacKay, J. O’Brien, J. Dahn and Z. Cheng: Phys., 2000, vol. 78, pp. 211-229.
6. S. Raj: Creep Behavior of Near-Stoichiometric Polycrystalline Binary Alloy., NASA TM-2002-2 1 12 10, Glenn Research Center, Cleveland, OH, 2002.
7. T. Czeppe and S. Wierzbinski: Mater. Sci. Eng. A42., 2000, pp.1499-1518.
8. V. Portnoy, A. Blinov, I. Tomilin, V. Kuznetsov and T. Kulik: Alloys Compd., 2002, vol. 336, pp. 196-201.10.1016/S0925-8388(01)01905-3 ↗
9. L. Sheng, W. Zhang, J. Guo, F. Yang, Y. Liang and H. Ye: Intermetallics., 2010, vol. 18, pp. 740-744.10.1016/j.intermet.2009.10.015 ↗
10. L. Sheng, J. Guo, T. Xi, B. Zhang and H. Ye: Mater. Sci. Eng. A22., 2012, pp. 231-236.
11. M. Alizadeh, G. Mohammadi, G.-H.A. Fakhrabadi and M.M. Aliabadi: Alloys Compd., 2010, vol. 505, pp. 64-69.10.1016/j.jallcom.2010.06.014 ↗
12. R. Noebe and A. Garg: Scripta Metallurgica et Materialia., United States, 1994, 30, pp. 815.10.1016/0956-716X(94)90396-4 ↗
13. M. Enayati, F. Karimzadeh and S. Anvari: Mater Process Technol., 2008, vol. 200, pp. 312-315.10.1016/j.jmatprotec.2007.09.023 ↗
14. M. Atzmon: Mater. Sci. Eng. A134., 1991, pp. 1326-1329.10.1016/0921-5093(91)90983-T ↗
15. E. Ivanov, T. Grigorieva, G. Golubkova, V. Boldyrev, A. Fasman, S. Mikhailenko and O. Kalinina: Mater. Lett., 1988, vol. 7, pp. 51-54.10.1016/0167-577X(88)90081-X ↗
16. A. Mashreghi and M. Moshksar: J. Alloys Compd., 2009, vol. 482, pp. 196-198.10.1016/j.jallcom.2009.03.156 ↗
17. E. Kubaski, O. Cintho and J. Capocchi: Powder Technology., 2011, vol. 214, pp. 77-82.10.1016/j.powtec.2011.07.038 ↗
18. E. Liu, J. Jia, Y. Bai, W. Wang, Y. Gao: Materials & Design., 2014, vol. 53, pp. 596-601.10.1016/j.matdes.2013.07.052 ↗
19. L. Takacs and C. Suryanarayana: TMS, Warrendale, PA, 1996, pp. 453–64.
20. D. Gavrilov, O. Vinogradov, and W. Shaw: Proc. Int. Conf. on Composite Materials, ICCM-10, Woodhead Publishing. 1995. pp. 299–307.
21. B. Cullity, Elements of X-ray Diffraction, Addison-Wesley, Reading, MA., 1978.
22. G. K. Williamson and W. H. Hall: Acta Mater., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
23. M. Moshksar and M. Mirzaee: Intermetallics., 2004, vol. 12, pp. 1361-1366.10.1016/j.intermet.2004.03.018 ↗
24. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
25. P.S. Gilman and J.S. Benjamin: Ann. Rev. Mater. Sci., 1983, vol. 13, pp. 279-300.10.1146/annurev.ms.13.080183.001431 ↗
26. M. Azimi and G. Akbari: J. Alloys Compd., 2011, vol. 509, pp. 27-32.10.1016/j.jallcom.2010.08.071 ↗
27. . Koohkan, S. Sharafi, H. Shokrollahi and K. Janghorban: Magnetism and Magnetic Materials., 2008, vol. 320, pp. 1089-1094.10.1016/j.jmmm.2007.10.033 ↗
28. M. Azimi and G. Akbari: J. Alloys Compd., 2013.555, pp.112-116.10.1016/j.jallcom.2012.12.043 ↗
29. G. Akbari and M. Taghian Dehaqani: Powder Metall., 2011, vol. 54, pp. 19-23.10.1179/003258909X12450768327027 ↗
30. E. Zelaya, M.R. Esquivel and D. Schryvers: Advanced Powder Technology., 2013, vol. 24, pp. 1063-1069.10.1016/j.apt.2013.03.008 ↗
31. Z.G. Liu, J.T. Guo, L.L. He and Z.Q. Hu: NanoStructured Materials., 1994, vol. 4, pp. 787-794.10.1016/0965-9773(94)90084-1 ↗
32. A. Taylor and N. Doyle: Journal of Applied Crystallography., 1972, vol. 5, pp. 201-209.10.1107/S0021889872009203 ↗
33. L. Lu, M.O. Lai and S. Zhang: Materials & Design., 1994, vol. 15, pp. 79-86.10.1016/0261-3069(94)90040-X ↗