journal article·2016-03

The Effect of Laves Phase (Fe,Al)2Zr on the High-Temperature Strength of Carbon-Alloyed Fe3Al Aluminide

Petr Kratochvíl, Věra Vodičková, Robert Král, Martin Švec

Publisher page

Abstract

The effects of carbon on the phase structure and on the yield stress σ 0.2 in the temperature range from 873 K to 1073 K (600 °C to 800 °C) of the Fe3Al type aluminides alloyed by Zr are analyzed. Four alloys with Zr and C in ranging from 1.0 to 5.0 at. pct of additives were used. The appearing of either Laves phase (Fe,Al)2Zr and/or carbides depend on the difference in concentrations, c Zr − c C. This parameter (c Zr − c C) has been selected instead of the concentration ratio c Zr/c C used in previous works since it exhibits a significantly better correlation with the Laves phase concentration which influences the high-temperature yield stress, σ 0.2, of the tested alloys. The presence of Laves phase or eutectic (matrix—Laves phase), respectively, enhances the value of the yield stress σ 0.2. The amount of Laves phase is decreased by the presence of C due to the affinity of carbon to Zr.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. C.G. McKamey, P.J. Maziasz, J.W. Jones, J. Mater. Res., 1992, vol. 7, pp. 2089–2106.10.1557/JMR.1992.2089 ↗
2. C.G. McKamey, P.J. Maziasz, G.M. Goodwin, T. Zacharia, Mater. Sci. Eng.,1994, vol. A174, pp. 59–70.10.1016/0921-5093(94)91112-6 ↗
3. C.G. McKamey, P.J. Maziasz, Intermetallics, 1998, vol. 6, pp. 303–314.10.1016/S0966-9795(97)00104-0 ↗
4. A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, K. Sztwiertnia, G. Sauthoff, and U. Messerschmidt, Mater. Sci. Eng., 2004, vol. 380A, pp. 9–19.10.1016/j.msea.2004.04.005 ↗
5. A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, G. Sauthoff, and U. Messerschmidt, Mater. Sci. Eng., 2004, vol. 381A, pp. 1–15.10.1016/j.msea.2004.04.039 ↗
6. F. Stein, M. Palm, G. Sauthoff, Intermetallics, 2005, vol. 13, pp. 1275–1285.10.1016/j.intermet.2004.08.013 ↗
7. D.G. Morris, M.A. Muñoz-Morris, L.M. Requejo, Acta Mater., 2006, vol. 54, pp. 2335 – 2341.10.1016/j.actamat.2006.01.008 ↗
8. D.G. Morris, I.Gutierrez-Urrutia, M.A. Muñoz-Morris, Scripta Mater., 2007, vol. 57, pp. 449–452.10.1016/j.scriptamat.2007.05.038 ↗
9. D.G. Morris and M.A. Muñoz-Morris, Mater. Sci. Eng., 2012, vol. 552, pp. 134–144.10.1016/j.msea.2012.05.022 ↗
10. D.G. Morris, L.M. Requejo, M.A. Muñoz-Morris, Intermetallics, 2012, vol.13. pp. 862–871.10.1016/j.intermet.2005.01.008 ↗
11. P. Kratochvil, F. Dobeš, J. Pešička, P. Málek, J. Buršík, V. Vodičková, P. Hanus, Mater. Sci. Eng., 2012, vol. A548, pp. 175–182.10.1016/j.msea.2012.03.103 ↗
12. P. Kejzlar, P.Kratochvíl, R. Král, V. Vodičková, Metall. Mater. Trans. A, 2014, vol.45A, pp. 335–343.10.1007/s11661-013-1987-1 ↗
13. F. Stein, G. Sauthoff, M. Palm, Z. Metallk., 2004, vol. 95, pp. 469–476.10.3139/146.017985 ↗
14. M. Palm, J. Alloy Compd., 2009, vol. 475, pp. 173–177.10.1016/j.jallcom.2008.07.036 ↗
15. A. Schneider, L. Falat, G. Sauthoff, G. Frommeyer, Intermetallics, 2003, vol. 11, pp. 443–450.10.1016/S0966-9795(03)00018-9 ↗
16. L. Falat, A. Schneider, G. Sauthoff, G. Frommeyer, Intermetallics, 2003, vol. 13, pp. 1256–1262.10.1016/j.intermet.2004.05.010 ↗