journal article·2014-08

Analysis of Fluxless, Reactive Brazing of Al Alloys Using Differential Scanning Calorimetry

Stephen Francis Corbin, Sooky Winkler, Dennis R. Turriff, Mark Kozdras

Publisher page

Abstract

During this investigation, a technique was developed, using differential scanning calorimetry (DSC), to quantitatively analyze the influence of a Ni-based electrolytic braze promotor surface deposit on the furnace brazing of aluminum alloys. The purpose of this braze promoter was to induce a large exothermic surface reaction capable of disrupting a tenacious oxide present on the aluminum braze sheet faying surface. A cyclic DSC methodology was developed which was capable of a quantitative determination of the exothermic reaction (ΔHexo) induced by the Ni plating. Samples with a small quantity of Ni plating exhibited significant “pre-reaction” between Ni and Al in the solid state which resulted in very low ΔHexo values. Samples with higher quantities of Ni plating exhibited large ΔHexo values up to 85 kJ/mole.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge, Mater. Sci. Eng. A, 2000, vol. A280, pp. 37–49.10.1016/S0921-5093(99)00653-X ↗
2. J. Zahr, S. Oswald, M. Turpe, H.J. Ullrich, U. Fussel, Vacuum, 86 1216–18, (2012).10.1016/j.vacuum.2011.04.004 ↗
3. G. Zhang, Y. Bao, Y. Jiang and H. Zhu, J. Mater. Eng. Perform., 20, 1451–56, (2011).10.1007/s11665-010-9802-2 ↗
4. D.M. Turriff, S.F. Corbin, M. Kozdras, Acta Mater., 58, 1332–41, (2010).10.1016/j.actamat.2009.10.037 ↗
5. D.P. Sekulic, Int. J. Eng. Sci.., 39, 229–41, (2001).10.1016/S0020-7225(00)00022-7 ↗
6. G.J. Marshall, R.K. Bolingbroke, A. Gray, Metall. Trans. A., 1993, vol. 24A, pp. 1935–42.10.1007/BF02666328 ↗
7. B.E. Cheadle and K.F. Dockus: Inert Atmosphere Fluxless Brazing of Aluminum Heat Exchangers, SAE Technical Paper 880446, 1988, DOI:10.4271/880446.10.4271/880446 ↗
8. T.B. Massalski: in Binary Alloy Phase Diagrams, American Society for Metals (ASM) International, Metals Park, OH, 1990.
9. J. Lacaze, S. Tierce, M.C. Lafont, Y. Thebeault, N. Pébère, G. Mankowski, C. Blanc, H. Robidou, D. Vaumousse, D. Daloz, Mater. Sci. Eng. A, 2005, vol. A413–A414, pp. 317–21.10.1016/j.msea.2005.08.187 ↗
10. C. Sinclair, J. Phase Equilib., 20(4), 361–69, (1999).10.1361/105497199770340888 ↗
11. C. Sinclair, G. Purdy, and J. Morral, Metall. Mater. Trans. A, 31A, 1187–92, (2001).
12. M.L. Kuntz, B. Panton, S. Wasiur-Rahman, Y. Zhou, and S.F. Corbin: Metall. Mater. Trans. A, 2013, vol. 44A, 3708–20.10.1007/s11661-013-1704-0 ↗
13. M. Kuntz, N. Zhou and S.F. Corbin, Metall. Mater. Trans. A, 37A, 2493–2504, (2006).10.1007/BF02586222 ↗
14. M. Kuntz, S.F. Corbin and N. Zhou, Acta Mater. 53: 3071–82 (2005).10.1016/j.actamat.2005.03.018 ↗
15. Y. Zhou, W.F. Gale, T.H. North, Int. Mater. Rev., 40, 181–96, (1995).10.1179/imr.1995.40.5.181 ↗
16. A.Biswas, S.K. Roy, Acta Mater., 52, 257–70, (2004).10.1016/j.actamat.2003.08.018 ↗
17. A.Biswas, S.K. Roy, K.B. Gurumurthy, N. Prabhu, S. Banerjee, Acta Mater., 50, 757–73, (2002).10.1016/S1359-6454(01)00387-1 ↗
18. F.Z. Chrifi-Alaoui, M. Nassik, K. Mahdouk, J.C. Gachon, J. Alloys Compd., 364, 121–26, (2004).10.1016/S0925-8388(03)00493-6 ↗
19. R. Pretorius, R. De Reus, A.M. Vredenberg, and F.W. Saris: Mater. Lett., 1990, vol. 9, p. 494.10.1016/0167-577X(90)90094-3 ↗
20. X. Qiu and J. Wang, Scripta Mater., 56, 1055–58, (2007).10.1016/j.scriptamat.2007.02.032 ↗
21. X. Qiu, J. Zhu, J. Olier, C. Yu, Z. Wang, H. Yu, J. Phys. D Appl. Phys. 42, 1–6, (2009).
22. K.W. Richter and H. Ipser, Intermetallics, 11, 101–09, (2003).10.1016/S0966-9795(02)00184-X ↗