Modeling the Flow Behavior, Recrystallization, and Crystallographic Texture in Hot-Deformed Fe-30 Wt Pct Ni Austenite
Source abstract
Abstract
The present work describes a hybrid modeling approach developed for predicting the flow behavior, recrystallization characteristics, and crystallographic texture evolution in a Fe-30 wt pct Ni austenitic model alloy subjected to hot plane strain compression. A series of compression tests were performed at temperatures between 850 °C and 1050 °C and strain rates between 0.1 and 10 s−1. The evolution of grain structure, crystallographic texture, and dislocation substructure was characterized in detail for a deformation temperature of 950 °C and strain rates of 0.1 and 10 s−1, using electron backscatter diffraction and transmission electron microscopy. The hybrid modeling method utilizes a combination of empirical, physically-based, and neuro-fuzzy models. The flow stress is described as a function of the applied variables of strain rate and temperature using an empirical model. The recrystallization behavior is predicted from the measured microstructural state variables of internal dislocation density, subgrain size, and misorientation between subgrains using a physically-based model. The texture evolution is modeled using artificial neural networks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. S. Almaguer, C.M. Sellars, and W.M. Rainforth: Proc. 1st Joint Int. Conf. on Recrystallisation and Grain Growth, G. Gottstein and D.A. Molodov, eds., Springer-Verlag, Aachen, 2001, vol. 2, pp. 831–36
2. L.J. Swartzendruber, V.P. Itkin, C. Alcock: J. Phase Equilibria, 1991, vol. 12, pp. 288–31210.1007/BF02649918 ↗
3. W. Charnock, J. Nutting: Met. Sci. J., 1967, vol. 1, pp. 123–2710.1016/0036-9748(67)90027-0 ↗
4. M.F. Abbod, J. Talamantes-Silva, Q. Zhu, and D.A. Linkens: Proc. 2002 IEEE Int. Symp. on Intelligent Control (ISIC2002), Vancouver, BC, Canada, Oct. 27–30, 2002, C.W. de Silva and F. Karray, eds., IEEE Control Systems Society, Omnipress, Madison, WI, 2002, pp. 321–26
5. M.F. Abbod, D.A. Linkens, Q. Zhu: Mater. Sci. Eng. A, 2002, vol. A333, pp. 397–40810.1016/S0921-5093(01)01873-1 ↗
6. F. Bai: Ph.D. Thesis, University of Sheffield, Sheffield, United Kingdom, 2005
7. V. Randle, O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon and Breach Science Publishers, Amsterdam, 200010.1201/9781482287479 ↗
8. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Butterworth and Co., London, 1982
9. M.S. Loveday, G.J. Mahon, B. Roebuck, A.J. Lacey, E.J. Palmiere, C.M. Sellars, M.R. van der Winden: Mater. High Temp., 2006, vol. 23, pp. 85–11810.3184/096034006782739394 ↗
10. R.J. Hand, S.R. Foster, C.M. Sellars: Mater. Sci. Technol, 2000, vol. 16, pp. 442–5010.1179/026708300101507893 ↗
11. H. Shi, A.J. McLaren, C.M. Sellars, R. Shahani, R. Bolingbroke: Mater. Sci. Technol., 1997, vol. 13, pp. 210–1610.1179/mst.1997.13.3.210 ↗
12. Q. Zhu, H.R. Shercliff, and C.M. Sellars: Proc. Int. Conf. on Thermomechanical Processing of Steels and Other Materials (THERMEC’97), Wollongong, Australia, 1997, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 2039–45
13. C.M. Sellars, Q. Zhu: Mater. Sci. Eng., 2000, vol. A280, pp. 1–710.1016/S0921-5093(99)00648-6 ↗
14. F. Bai, P. Cizek, E.J. Palmiere, W.M. Rainforth, J.H. Beynon: Mater. Sci. Forum, 2003, vols. 426–432, pp. 3623–2810.4028/www.scientific.net/MSF.426-432.3623 ↗
15. F. Bai, P. Cizek, E.J. Palmiere, W.M. Rainforth: Mater. Sci. Forum, 2004, vols. 467–470, pp. 21–2610.4028/www.scientific.net/MSF.467-470.21 ↗
16. P. Cizek, J.A. Whiteman, W.M. Rainforth, J.H. Beynon: Microsc. J., 2004, vol. 213, pp. 285–9510.1111/j.0022-2720.2004.01305.x ↗
17. P. Cizek, F. Bai, E.J. Palmiere, W.M. Rainforth: J. Microsc., 2005, vol. 217, pp. 138–5110.1111/j.1365-2818.2005.01429.x ↗
18. F.R. Castro Fernandes, C.M. Sellars, J.A. Whiteman: Mater. Sci. Technol., 1990, vol. 6, pp. 453–6010.1179/mst.1990.6.5.453 ↗
19. Q Zhu, M.F. Abbod, J. Talamantes-Silva, C.M. Sellars, D.A. Linkens, J.H. Beynon: Acta Mater., 2003, vol. 51, pp. 5051–6210.1016/S1359-6454(03)00353-7 ↗
20. M.F. Abbod, C.M. Sellars, D.A. Linkens, Q. Zhu, M. Mahfouf: Mater. Sci. Eng., 2005, vol. A395, pp. 901–11
21. C.M. Sellars, Q. Zhu: Mater. Sci. Eng., 2000, vol. A280, pp. 1–710.1016/S0921-5093(99)00648-6 ↗
22. C.M. Sellars: Conf on Hot Working and Forming Processes, C.M. Sellars, and G.J. Davies, eds., The Metals Society, London, 1980, pp. 3–15
23. M. Nørgaard: Neural Networks for Modelling and Control of Dynamic Systems, Springer, New York, NY, 200010.1007/978-1-4471-0453-7 ↗
24. M.S. Mirza, C.M. Sellars: Mater. Sci. Technol., 2001, vol. 17, pp. 1133–4110.1179/026708301101510663 ↗
25. B. Kowalski, A.J. Lacey, C.M. Sellars: Mater. Sci. Technol., 2003, vol. 19, pp. 1564–7010.1179/026708303225008130 ↗
26. J. Hirsch, K. Lücke: Acta Metall., 1988, vol. 36, p. 286310.1016/0001-6160(88)90172-1 ↗
27. F.J. Humphreys, M. Hatherly: Recrystallisation and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, 1996
28. U.F. Kocks, C.N. Tome, H.R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effects on Materials Properties, Cambridge University Press, Cambridge, United Kingdom, 1998