journal article·2014-01

Phase Transformation and Microstructure of Zn2Ti3O8 Nanocrystallite Powders Prepared Using the Hydrothermal Process

Cheng-Li Wang, Weng-Sing Hwang, Horng-Huey Ko, Chi-Shiung Hsi, Kuo-Ming Chang, Moo-Chin Wang

Publisher page

Abstract

This paper examines the phase transformation and microstructure of Zn2Ti3O8 nanocrystallite powders prepared using the hydrothermal process that includes TiCl4 and Zn(NO3)2·6H2O as the initial materials. Differential thermal analysis, X-ray diffraction, transmission electron microscopy (TEM), selected area electron diffraction, nanobeam electron diffraction, and high resolution TEM were utilized to characterize the transition behavior of zinc titanate precursor powders after calcination. Nanocrystalline Zn2Ti3O8 powders with a size range of about 5.0 to 8.0 nm were obtained when the precursor powders were calcined at 773 K (500 °C) for 1 hour. When the zinc titanate precursor powders were calcined at 1073 K (800 °C) for 1 hour, the cubic crystal of Zn2Ti3O8 with a o = 0.8399 ± 0.0003 nm still remained the predominant crystalline phase and the crystallite size increased to 20.0 nm. In addition, ZnTiO3 phase first appeared because of the 13.8 pct of Zn2Ti3O8 decomposition when the zinc titanate precursor powders were calcined at 1073 K (800 °C) for 1 hour. When the zinc titanate precursor powders were calcined at 1073 K (800 °C) for 9 hours, the Zn2Ti3O8 crystallites grew continuously to 80.0 nm and enhanced the crystallinity. When the precursor powders were calcined at 1273 K (1000 °C) for 1 hour, Zn2TiO4 crystallites with a o = 0.8461 ± 0.0002 nm were the predominant crystalline phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J.H. Swisher and K. Schwerdtfeger: J. Mater. Eng. Preform., 1992, vol. 1, pp.565-571.10.1007/BF02682694 ↗
2. J.H. Swisher, J. Yang and R.P. Gupta: Ind. Eng. Chem. Res., 1995, vol. 34, pp.4463-4471.10.1021/ie00039a037 ↗
3. H. Kagata, T. Inoue, J. Kato, I. Kameyama and T. Ishizaki: Ceram. Trans., 1993, vol. 32, pp.81-90.
4. T. Negas, T. Yeager, S. Bell and N. Coats: Am. Ceram. Soc. Bull., 1993, vol. 72, pp.80-89.
5. H.T. Kim, J.D. Byun and Y. Kim: Mater. Res. Bull., 1998, vol. 33, pp.963-973.10.1016/S0025-5408(98)00056-7 ↗
6. H.T. Kim, J.D. Byun and Y. Kim: Mater. Res. Bull., 1998, vol. 33, pp.975-986.10.1016/S0025-5408(98)00057-9 ↗
7. F.H. Dulin and D.E. Rase: J. Am. Ceram. Soc., 1960, vol. 43, pp.125-131.10.1111/j.1151-2916.1960.tb14326.x ↗
8. S.F. Bartram and R.A. Slepetys: J. Am. Ceram. Soc., 1961, vol. 44, pp.493-499.10.1111/j.1151-2916.1961.tb13712.x ↗
9. O.Yamaguchi, M. Morimi, H. Kawabata, and K.Shimizu: J. Am. Ceram. Soc., 1987, vol. 70, pp. 97-98.
10. U. Steinike and B. Wallis: Cryst. Res. Technol., 1997, vol. 32, pp.187-193.10.1002/crat.2170320119 ↗
11. M. Sugiura and K. Ikeda: J. Jpn. Ceram. Assoc., 1947, vol. 55, pp.62-66.10.2109/jcersj1947.55.62 ↗
12. H.T. Kim, S. Nahm, J.D. Byun and Y. Kim: J. Am. Ceram. Soc., 1999, vol. 82, pp.3476-3480.10.1111/j.1151-2916.1999.tb02268.x ↗
13. Y.S. Chang, Y.H. Chang, I.G. Chen, G.J. Chen and Y.L. Chai: J. Crystal Growth, 2002, vol. 243, pp.319-326.10.1016/S0022-0248(02)01490-2 ↗
14. Y.S. Chang, Y.H. Chang, I.G. Chen, G.J. Chen and Y.L. Chai: Solid State Commu., 2003, vol. 128, pp.203-208.10.1016/S0038-1098(03)00527-1 ↗
15. E. Hosono, S. Fujihara, M. Onuki and T. Kimura: J. Am. Ceram. Soc., 2004, vol. 87, pp.1785-1788.10.1111/j.1551-2916.2004.01785.x ↗
16. H.T. Kim, Y. Kim, M. Valant and D. Suvorov: J. Am. Ceram. Soc., 2001, vol. 84, pp.1081-1086.10.1111/j.1151-2916.2001.tb00793.x ↗
17. S.K. Manik, P. Bose and S.K. Pradhan: Mater. Chem. Phys., 2003, vol. 82, pp.837-847.10.1016/j.matchemphys.2003.07.012 ↗
18. A.I. Sheinkman, F.P. Sheinkman, I.P. Dobrovolskii and G.R. Zvyagina: Izv. Akad. Nauk SSSR Neorg. Mater., 1977, vol. 13, pp.1447-1450.
19. R.K. Datta: Final Report under U.S. Department of Energy Contract No. DE-AP21-93MC 53415, Virginia Polytechnic Institute and State University, Blacksburg, VA 24060, 1994.
20. J. Yang and J. H. Swisher: Mater. Character., 1996, vol. 37, pp.153-159.10.1016/S1044-5803(96)00098-8 ↗
21. V.B. Reddy, S.P. Goel and P.N. Mehrotry: Mater. Chem. Phys., 1984, vol. 10, pp.365-373.10.1016/0254-0584(84)90097-X ↗
22. C.L. Wang, W.S. Hwang, K.M. Chang, H.H. Ko, C.S. Hsi, H.H. Huang, and M.C. Wang: Int. J. Mol. Sci., 2011, vol. 12, pp.935-945.10.3390/ijms12020935 ↗
23. C.L. Kuo, C.L. Wang, H.H. Ko, W.S. Hwang, K.M. Chang, W.L. Li, H.H. Huang, Y.H. Chang and M.C. Wang, Synthesis of zinc oxide nanocrystalline powders for cosmetic application, Ceram. Inter., 2010, vol. 36, pp. 693-698.10.1016/j.ceramint.2009.10.011 ↗
24. B.P. Cim, J. Wang, S.C. Ng, C.H. Chew and L.M. Gan: Ceram. Inter., 1998, vol. 24, pp.205-209.10.1016/S0272-8842(97)00003-5 ↗
25. K. Terabe, K. Kato, H. Miyazaki, S. Yamaguchi, A. Imai and Y. Iguchi: J. Mater. Sci., 1994, vol. 29, pp.1617-1622.10.1007/BF00368935 ↗
26. J. Yu, X. Zhao and Q. Zhao: Thin Solid Films, 2000, vol. 379, pp.7-14.10.1016/S0040-6090(00)01542-X ↗
27. A.A. Aal, M.A. Barakat and R.M. Mohamed: Appl. Surface Sci., 2008, vol. 254, pp.4577-4583.10.1016/j.apsusc.2008.01.049 ↗
28. R.C. Garve, P.S. Nicholson: J. Am. Ceram. Soc., 1972, vol. 55, pp.303-305.10.1111/j.1151-2916.1972.tb11290.x ↗
29. M. Ocaña, W.P. Hsu and E. Matijevic: Langmuir, 1991, vol. 7, pp.2911-2916.10.1021/la00060a008 ↗
30. Y.L. Chai, Y.S. Chang, G.J. Chen and Y.J. Hsiao: Mater. Res. Bull., 2008, vol. 43, pp.1066-1073.10.1016/j.materresbull.2007.06.002 ↗
31. M.C. Wang: J. Mater. Res., 1994, vol. 9, pp.2290-2297.10.1557/JMR.1994.2290 ↗