Control of surface carburization and improvement of dynamic fracture behavior in tungsten heavy alloys
Source abstract
Abstract
A carburization technique using a Cr powder layer has been developed to control the diffusion depth of carbon in W-Ni-Fe heavy alloys. The aged heavy alloy samples were covered with a Cr powder layer of about 1-mm thickness and then packed with carbon black powder. The packed samples were heat-treated at 1150 °C for 10 minutes in H2 and then for 50 minutes in N2. The carburization treatment resulted in the formation of Cr7C3 and Fe3W3C around the tungsten grains from the sample surface with a thickness of 40 to 50 µm. This carburized layer was much thinner than that formed without a Cr powder layer under the same experimental conditions. With the surface carburization, the surface hardness increased by ∼75 pct, from 508 to 888 VHN, and the impact energy decreased by ∼31 pct, from 123 to 85 J. After the carburization treatment, the main fracture behavior in a dynamic torsional test changed from smearing of the matrix to cleavage of the tungsten grains. A high-speed impact test showed that the surface carburization of penetrators induced the formation of many cracks around the penetrator surface, enhanced the self-sharpening, and improved the penetration performance. It appears that the developed technique provides an easy method of carburization without serious deterioration of the toughness of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Velocity Impact and Material Behavior · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. L.S. Magness: in Tungsten and Tungsten Alloys—1992, A. Bose and R.J. Dowding, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 15–22.
2. R.L. Woodward, N.J. Baldwin, I. Burch, and B.J. Baxter: Metall. Trans. A, 1985, vol. 16A, pp. 2031–37.10.1007/BF02662404 ↗
3. M. Zhou, R.J. Clifton, and A. Needleman: in Tungsten and Tungsten Alloy—1992, A. Bose and R.J. Dowding, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 343–56.
4. K.T. Ramesh and R.S. Coates: Metall. Trans. A, 1992, vol. 23A, pp. 2625–30.10.1007/BF02658066 ↗
5. A. Bose, H. Couque, and J. Lankford: Int. J. Power Metall., 1992, vol. 28, pp. 383–94.
6. L.S. Magness: in Tungsten and Refractory Metals 3—1995, A. Bose and R.J. Dowding, eds., Metal Powder Industries Federation, Princeton, NJ, 1995, pp. 133–44.
7. S.W. Jung, D.K. Kim, S. Lee, J.W. Noh, and S.J.L. Kang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2027–35.10.1007/s11661-999-0013-0 ↗
8. D.K. Kim, S. Lee, H.J. Ryu, S.H. Hong, and J.W. Noh: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2475–89.10.1007/s11661-000-0193-0 ↗
9. S.P. Andrew, R.D. Caligiuru, and L.E. Eiselstein: in Tungsten and Tungsten Alloys—Recent Advances, A. Crowson and E.S. Chen, eds., TMS, Warrendale, PA, 1991, pp. 141–49.
10. J.W. Noh, E.P. Kim, H.S. Song, W.H. Baek, K.S. Churn, and S.J.L. Kang: Metall. Trans. A, 1993, vol. 24A, pp. 2411–16.10.1007/BF02646520 ↗
11. J.W. Noh, M.H. Hong, S.J.L. Kang, and D.Y. Yoon: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2828–31.10.1007/BF02649233 ↗
12. F.E. Sczerzenie and H.C. Rogers: Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1974, pp. 645–56.
13. H.K. Yoon, S.H. Lee, S.J.L. Kang, and D.N. Yoon: J. Mater. Sci., 1983, vol. 18, pp. 1374–80.10.1007/BF01111957 ↗
14. R.M. German and K.S. Churn: Metall. Trans. A, 1984, vol. 15A, pp. 747–54.10.1007/BF02644206 ↗
15. D.V. Edmonds and P.N. Jones: Metall. Trans. A, 1979, vol. 10A, pp. 289–95.10.1007/BF02658336 ↗
16. M.R. Eisenmann and R.M. German: Int. J. Refract. Met. H., 1984, vol. 3, pp. 86–91.
17. R.M. German, J.E. Hanafee, and S.L. DiGiallonardo: Metall. Trans. A, 1984, vol. 15A, pp. 121–28.10.1007/BF02644393 ↗
18. K.A. Hartley, J. Duffy, and R.H. Hawley: Metals Handbook, 9th ed., ASM, Metals Park, OH, 1985, vol. 8, pp. 218–28.
19. A. Molinari and R.J. Clifton: J. Appl. Mech.-T. ASME, 1987, vol. 54, pp. 806–12.10.1115/1.3173121 ↗
20. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161–75.10.1007/BF02698247 ↗
21. B.C. Muddle: Metall. Trans. A, 1984, vol. 15A, pp. 1089–98.10.1007/BF02644702 ↗
22. J.B. Posthill and D.V. Edmonds: Metall. Trans. A, 1986, vol. 17A, pp. 1921–34.10.1007/BF02644990 ↗
23. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, Pergamon Press, New York, NY, 1979, pp. 378–84.
24. U.S. Lindholm and R. Johnson: in Materials Behavior under High Stress and Ultrahigh Loading Rates, J. Mascall and V. Weiss, eds., Plenum Press, New York, NY, 1983, p. 61.10.1007/978-1-4613-3787-4_4 ↗
25. T.A.C. Stock and K.R.L. Thompson: Metall. Trans., 1970, vol. 1, pp. 219–24.10.1007/BF02819264 ↗