journal article·2014-08

Effect of Dispersoid Size and Volume Fraction on Aging Behavior and Mechanical Properties of TiO2-Dispersed AA7075 Alloy Composites

R. Karunanithi, K. S. Ghosh, Supriya Bera

Publisher page

Abstract

TiO2-dispersed AA7075 alloy composites were produced by mechanical milling followed by hot uniaxial compaction and sintering. The effects of volume fraction and dispersoid size on precipitation kinetics, densification, and hardness of the composites were studied in detail. While the sinterability of the composites decreases with increasing volume fraction of the particulate reinforcement (dispersoid), the same increases with decreasing particle size of the reinforcement. Microstructural analysis using X-ray diffraction and scanning electron microscopy shows an improvement in the distribution of reinforcement with decreasing particle size. The hardness of the composites increases with increasing volume fraction and decreasing TiO2 particle size. Further, the reinforced composites do not show age hardenability unlike unreinforced AA7075 alloy. Microstructural analysis reveals the formation of MgTiO3 and ZnO near the TiO2-AA7075 interface, which suppresses the formation of Guinier-Preston (GP) zone resulting in no age hardenability of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. R. Sankar and P. Singh: Mater. Lett., 1998, vol. 36, pp. 201-5.10.1016/S0167-577X(98)00026-3 ↗
2. W. Yuan, J. Zhang, C. Zhang, and Z. Chen: J. Mater. Process. Tech., 2009 vol. 209, pp. 3251-5.10.1016/j.jmatprotec.2008.07.030 ↗
3. S. Bera, S. G. Chowdhury, Y. Estrin, and I. Manna: J. Alloy. Compd., 2013, vol. 548, pp. 257-65.10.1016/j.jallcom.2012.09.007 ↗
4. S. K. Ghosh, P. Saha, and S. Kishore: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4694-4701.10.1016/j.msea.2010.03.108 ↗
5. R. Deaquino-Lara, I. Estrada-Guel, G. Hinojosa-Ruiz, R. Flores-Campos, J.M. Herrera-Ramírez, and R. Martínez-Sánchez: J. Alloy. Compd., 2011, vol. 509S, pp. S284-S289.10.1016/j.jallcom.2010.11.183 ↗
6. A. Bhaduri, V. Gopinathan, P. Ramakrishnan, and A.P. Miodownik: Mater. Sci. Eng. A, 1996, vol. 221, pp. 94-101.10.1016/S0921-5093(96)10484-6 ↗
7. A. Ahmed, A.J. Neely, and K. Shankar: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 795-815.10.1007/s11661-010-0505-y ↗
8. C. Suryanarayana and N. Al-Aqeeli: Prog. Mater. Sci., 2013, vol. 58, pp. 383-502.10.1016/j.pmatsci.2012.10.001 ↗
9. A. Slipenyuk, V. Kuprin, Yu. Milman, V. Goncharuk, and J. Eckert: Acta Mater., 2006, vol. 54, pp. 157-66.10.1016/j.actamat.2005.08.036 ↗
10. A. Slipenyuk, V. Kuprin, Yu. Milman, V. Goncharuk, and J. Eckert: Mater. Sci. Eng. A, 2004, vol. 381, pp. 165-70.10.1016/j.msea.2004.04.040 ↗
11. S. Sivasankaran, K. Sivaprasad, R. Narayanasamya, and V.K. Iyer: J. Alloy. Compd., 2010, vol. 491, pp. 712-21.10.1016/j.jallcom.2009.11.051 ↗
12. J.M. Gomez de Salazar, and M.I. Barrena: Scripta Mater., 2001, vol. 44, pp. 2489-95.10.1016/S1359-6462(01)00918-6 ↗
13. M. Gajewska, J. Dutkiewicz, and J. Morgiel: J. Alloy. Compd., 2014, vol. 586, pp. S423–S427.10.1016/j.jallcom.2012.10.055 ↗
14. I. Mobasherpour, A.A. Tofigh, and M. Ebrahimi: Mater. Chem. Phys., 2013, vol. 138, pp. 535-41.10.1016/j.matchemphys.2012.12.015 ↗
15. A. Sahin and F. Sarioglu: Scripta Mater., 1997 vol. 37, pp. 1117-21.10.1016/S1359-6462(97)00238-8 ↗
16. G.M. Janowski and B.J. Pletka: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3027-35.10.1007/BF02669659 ↗
17. S. Pal, R. Mitra, and V.V. Bhanuprasad: Mater. Sci. Eng. A, 2008, vol. 480, pp. 496–505.10.1016/j.msea.2007.07.072 ↗
18. P. Jin, B.L. Xiao, Q.Z. Wang, Z.Y. Ma, Y. Liu, and S. Li: Mater. Sci. Eng. A, 2011, vol. 528 pp. 1504-11.10.1016/j.msea.2010.10.075 ↗
19. C. Padmavathi and A. Upadhyaya: Sci. Sintering, 2010, vol. 42, pp. 363-82.10.2298/SOS1003363P ↗
20. M. Mujahid and I. Friska: J. Mater. Eng. Perform., 2005, vol. 14, no. 1, pp. 69-74.10.1361/10599490522284 ↗
21. B. Prabhu, C. Suryanarayana, L. Ana, and R. Vaidyanathan: Mater. Sci. Eng. A, 2006, vol. 425, pp. 192-200.10.1016/j.msea.2006.03.066 ↗
22. R. Karunanithi, D. Ghosh, K.S. Ghosh, and S. Bera: Metallurgical and Materials Engineering Department, National Institute of Technology Durgapur, India, 2013.
23. L.F. Mondolfo: Metall. Mater., 1971, vol.16, pp. 95-124.
24. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52 pp. 4589-99.10.1016/j.actamat.2004.06.017 ↗
25. A. Ahmed, A.J. Neely, K. Shankar, P. Nolan, S. Moricca, and T. Eddowes: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1582-91.10.1007/s11661-010-0201-y ↗
26. J.H.E. Jeffes: Encyclopedia of Materials Science Technology (2nd ed.), Oxford 2001, pp. 2751-3.10.1016/B0-08-043152-6/00490-3 ↗
27. P.K. Balasubramanium, P. Srinivasa Rao, B.C. Pai, K.G. Satyanarayana, and P.K. Rohatgi: Compos. Sci. Technol., 1990, vol. 39, pp. 245–59.10.1016/0266-3538(90)90044-6 ↗
28. V.V. Bhanu Prasad, B.V.R. Bhat, Y.R. Mahajan, and P. Ramakrishnan: Mater. Sci. Eng. A, 2002, vol. 337, pp. 179-86.10.1016/S0921-5093(02)00024-2 ↗
29. S.I. Hong and G.T. Gray III: Acta Mater., 1992, vol. 40, pp. 3299-3315.10.1016/0956-7151(92)90043-E ↗
30. B. Karthikeyan, S. Ramanathan, and V. Ramakrishnan: Mater. Des.., 2010, vol. 31, pp. S92-S95.10.1016/j.matdes.2009.10.066 ↗