Microstructure of a Creep-Resistant 10 Pct Chromium Steel Containing 250 ppm Boron
Source abstract
Abstract
The microstructure of a trial martensitic chromium steel containing a high content of boron (250 ppm) was characterized in detail in the as-tempered and aged conditions. This steel has a similar composition and heat treatment as the TAF steel that still is unsurpassed in creep strength among all 9 to 12 pct chromium steels. Characterization was performed by using scanning electron microscopy, energy-filtered transmission electron microscopy, secondary ion mass spectroscopy, and atom probe tomography. Focus was placed on investigating different types of precipitates that play a key role in improving the creep resistance of these steels. The low tempering temperature of 963 K (690 °C) is enough for the precipitation of the full volume fraction of both MX and M23C6. A high boron content, more than 1 at. pct, was found in M23C6 precipitates and they grow slowly during aging. The high boron level in the steel results in metal borides rather than BN with the approximate formula (Mo0.66Cr0.34)2(Fe0.75V0.25)B2. Two families of MX precipitates were found, one at lath boundaries about 35 nm in size and one dense inside the laths, only 5 to 15 nm in size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T. Fujita: ISIJ Int., 1992, vol. 32, pp. 175-81.10.2355/isijinternational.32.175 ↗
2. T. Fujita: Adv. Mater. Process, 1992, vol. 4, pp. 42-47.
3. K.-H. Mayer and F. Masuyama: Creep-Resistant Steels, Woodhead Publishing Ltd., Cambridge, UK, 2008, pp. 15-77.10.1533/9781845694012.1.15 ↗
4. J. Hald: Modeling of Microstructure Evolution in Creep Resistance Materials, The Institute of Materials, London, UK, 1998, pp. 1-14.
5. A. Strang: Materials for Advanced Power Engineering, Forschungszentrum Julich GmbH, Liege, Belgium, 1998, pp. 171-89.
6. P.J. Ennis and W.J. Quadakkers: Parsons 2000: Advanced Materials for 21st Century Turbines and Power Plants, The Institute of Materials, Cambridge, UK, 2000, pp. 265-75.
7. H.K. Danielsen and J. Hald: Energy Mater., 2006, vol. 1, pp. 49-57.10.1179/174892306X99732 ↗
8. T.-U. Kern, M. Staubli, K.-H. Mayer, B. Donth, G. Zeiler, and A. DiGianfrancesco: Materials for Advanced Power Engineering, Forschungszentrum Julich GmbH, Liege, Belgium, 2006, pp. 843-54.
9. M. Staubli, K.-H. Mayer, T.-U. Kern, W. Bendick, P. Morris, A. DiGianfrancesco, and H. Cerjak: Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables, The Institute of Materials, Dublin, Ireland, 2003, pp. 305-24.
10. H. Semba and F. Abe: The 4th Int. Conference on Advances in Materials Technology for Fossil Power Plants, ASM International., Hilton Head Island, SC, 2004, pp. 1229-41.
11. A. Golpayegani, M. Hättestrand, and H.-O. Andrén: Parsons 2003: Engineering Issues in Turbine Machinery, Power Plant and Renewables, The Institute of Materials, Dublin, Ireland, 2003, pp. 347-63.
12. H.-O. Andrén: 34 th MPA Seminar Materials and Components Behavior in Energy & Plant Technology, Materialprüfungsanstalt Universität Stuttgart, Stuttgart, Germany, 2008, paper 8.
13. H.-O. Andrén and A. Golpayegani: New Developments on Metallurgy and Applications of High Strength Steels, Asociación Argentina de Materiales, Buenos Aires, Argentina, 2008, paper 16.
14. A. Golpayegani and H.-O. Andrén: Parsons 2007: Power Generation in an Era of Climate Change, IOM Communications, London, UK, 2007, pp. 533-41.
15. M. Hättestrand and H.-O. Andrén: Acta Mater., 2001, vol. 49, pp. 2123-8.10.1016/S1359-6454(01)00135-5 ↗
16. P. Warbichler, F. Hofer, P. Hofer, and E. Letofsky: Micron, 1998, vol. 29, pp. 63-72.10.1016/S0968-4328(97)00054-1 ↗
17. M. Hättestrand and H.-O. Andrén: Micron, 2001, vol. 32, pp. 789-97.10.1016/S0968-4328(00)00086-X ↗
18. T.F. Kelly and D.J. Larson: Mater. Charact., 2000, vol. 44, pp. 59-85.10.1016/S1044-5803(99)00055-8 ↗
19. T.C. Kunicki, D. Beermann, B.G. Geiser, E. Oltman, R.W. O’Neill, and D.J. Larson: 50 th International Field Emission Symposium, Technical Digest, Guilin, China, 2006, pp. 535-36.
20. M.K. Miller, A. Cerezo, M.G. Hetherington, and G.D.W. Smith: Atom Probe Field Ion Microscopy, Clarendon Press, Oxford, UK, 1996.10.1093/oso/9780198513872.001.0001 ↗
21. F. Liu, J.E. Tang, T. Jonsson, S. Canovic, K. Segerdahl, J.-E. Svensson, and M. Halvarsson: Oxid. Met., 2006, vol. 66, pp. 295-319.10.1007/s11085-006-9035-9 ↗
22. F. Hofer, P. Warbichler, and W. Grogger: Ultramicroscopy, 1995, vol. 59, pp. 15-31.10.1016/0304-3991(95)00015-S ↗
23. R.G. Baker and J. Nutting: Precipitation Processes in Steels, The Iron and Steel Institute, Sheffield, UK, 1958, pp. 1-22.
24. L. Lundin, M. Hättestrand, and H.-O. Andrén: Parsons 2000: Advanced Materials for 21 st Century Turbines and Power Plants, The Institute of Materials, 2000, London, UK, pp. 603-17.
25. H.-O. Andrén, A. Henjered, and L. Karlsson: Stainless Steels ‘84, The Institute of Metals, Gothenburg, Sweden, 1984, pp. 91-96.
26. L. Korcakova: Ph.D. Dissertation, Technical University of Denmark, Lyngby, Denmark, 2002.
27. F. Abe: 34 th MPA Seminar Materials and Components Behavior in Energy & Plant Technology, Materialprüfungsanstalt Universität Stuttgart, Stuttgart, Germany, 2008, paper no. 3.
28. J. Hald and L. Korcakova: ISIJ Int., 2003, vol. 43, pp. 420-27.10.2355/isijinternational.43.420 ↗
29. M. Hättestrand, M. Schwind, and H.-O. Andrén: Mater. Sci. Eng. A, 1998, vol. A250, pp. 27-36.10.1016/S0921-5093(98)00532-2 ↗
30. L. Lundin and H.-O. Andrén: Surf. Sci., 1992, vol. 266, pp. 397-401.10.1016/0039-6028(92)91052-D ↗
31. F. Abe: New Developments on Metallurgy and Applications of High Strength Steels, Asociación Argentina de Materiales, Buenos Aires, Argentina, 2008, pp. 385-98.
32. P. Rogl, K. Korniyenko, and T. Velikanova: Boron-Carbon-Niobium in Refractory Metal Systems: Phase Diagrams, Crystallographic and Thermodynamic Data, New Series IV/11E1, Springer-Verlag, Berlin, Germany, 2009.
33. K. Sakuraya, H. Okada, and F. Abe: The 4th Int. Conf. on Advances in Materials Technology for Fossil Power Plants, ASM International, Hilton Head Island, SC, 2004, pp. 1270-79.