Analysis of the Plasticity-Enhancing Mechanisms in 12 pctMn Austeno-ferritic Steel by In Situ Neutron Diffraction
Source abstract
Abstract
The tensile behavior of ductile ultra-high strength Fe-12 pctMn-0.3 pctC-2 pctAl austeno-ferritic steel was studied by in situ neutron diffraction measurement of the elastic lattice strains, dislocation density, stacking fault probability, and strain-induced transformation kinetics. Micro-yielding was observed in austenite, and the plastic deformation of ferrite remained very limited throughout the deformation. The analysis identified three contributions to the strain hardening: twinning-induced plasticity, transformation-induced plasticity, and the accumulation of a high density of geometrically necessary dislocations accommodating the strain mismatch at the phase boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S.W.Lee, S.-J. Lee, B.C.De Cooman, Acta Mater. 59 (2011) 7546-7553.10.1016/j.actamat.2011.08.030 ↗
2. T.H.Lee, C.S.Oh, S.J.Kim, Scripta Mater. 58 (2008) 110-113.10.1016/j.scriptamat.2007.09.029 ↗
3. O.Bouaziz, S.Allain, C.Scott, Scripta Mater. 58 (2008) 484-487.10.1016/j.scriptamat.2007.10.050 ↗
4. I.Gutierrez-Urrutia, D.Raabe, Scripta Mater. 66 (2012) 992-996.10.1016/j.scriptamat.2012.01.037 ↗
5. G.B.Olson, M.Cohen, Metall. Trans. A 6A (1975) 791-795.10.1007/BF02672301 ↗
6. A.Dumay, J.P.Chateau, S.Allain, S.Migot, O.Bouaziz, Mater. Sci. and Eng. A 483-484, (2008) 184-187.10.1016/j.msea.2006.12.170 ↗
7. S.W.Yoo, C.S.Lee, W.S.Park, M.H.Kim, J.M.Lee, Comp. Mater. Sci. 50 (2011) 2014-2027.10.1016/j.commatsci.2011.02.002 ↗
8. J.E.Jung, J.H.Park, J.S.Kim, J.B.Jeon, S.K.Kim, Y.W.Chang, Met. Mater. Int. 20 (2014) 27-34.10.1007/s12540-014-1008-y ↗
9. S.W.Lee and B.C.De Cooman, Metall. Mater. Trans. A 45 (2014) 709-716.10.1007/s11661-013-2047-6 ↗
10. S.W. Lee and B.C. De Cooman: Metall. Mater. Trans. A (in press).
11. B.C. De Cooman and S.W. Lee: Int. Symp. on New Developments in Advanced High-Strength Sheet Steels, AIST, 2013, Vail, pp. 95–103.
12. M.T.Hutching, P.J.Withers, T.M.Holden, T.Lorentzen, Introduction to the Characterization of Residual Stress by Neutron Diffraction, 1st ed, London, Taylor and Francis, 200510.1201/9780203402818 ↗
13. T.Ungár, Mater. Sci. and Eng. A 14219 (2000) 1-9.
14. T.Ungár, I.Dragomir, A.Révész, A.Borbély, J. Appl. Cryst. 32 (1999) 992-1002.10.1107/S0021889899009334 ↗
15. A.J.Goldman, C.N.J.Wagner, Acta Metall. 11 (1963) 405-413.10.1016/0001-6160(63)90165-2 ↗
16. O.Bouaziz, S.Allain, C.P.Scott, P.Cugy, D.Barbier, Curr. Opin. Solid State Mater. Sci. 15 (2011) 141-168.10.1016/j.cossms.2011.04.002 ↗
17. J.K.Kim, Y.Estrin, B.C.De Cooman, Metall. Mater. Trans. A 44 (2013) 4168-4182.10.1007/s11661-013-1771-2 ↗
18. T.Ono, Y.Tomota, P.Lukas, D.Lugovy, D.Neov, N.Tsuchida, K.Nagai, Mater. Sci. and Tech. 20 (2014) 121-125.10.1179/174328413X13789824293623 ↗
19. Y.F.Shen, Y.D.Wang, X.P.Lin, X.Sun, R.Lin Peng, S.Y.Zhang, L.Zuo, P.K.Liaw, Acta Mater. 61 (2013) 6093-6106.10.1016/j.actamat.2013.06.051 ↗
20. S.Harjo, Y.Tomota, P.Lukás, M.Vrána, P.Mikula, M.Ono, Acta Mater. 49 (2009) 2471-2479.10.1016/S1359-6454(01)00147-1 ↗
21. P.J. Gibbs, B.C. De Cooman, D.W. Brown, B. Clausen, J.G. Schroth, M.J. Merwin, and D.K. Matlock: Metall. Mater. Trans. A (in press).
22. H. Mughrabi, Mater. Sci. and Eng. A 319-321 (2001) 139-143.10.1016/S0921-5093(01)01003-6 ↗
23. H. Gao, Y. Huang, Scripta Mater. 43 (2003) 113-118.10.1016/S1359-6462(02)00329-9 ↗