Tensile properties and creep behavior of a new Ti-Al-Nb intermetallic alloy with an O+α 2 microstructure
Source abstract
Abstract
A new Ti-Al-Nb alloy with a composition of Ti-27.5Al-13Nb (at. pct) was proposed. The density of this alloy was 4.7 g/cm3, which is about 13 pct lower than that for O+B2 alloys. After hot processing, the alloy was heat treated under two conditions: directly aged at 850 °C (DA treatment), or cooled from above the β-transus temperature with a cooling rate of 3 °C/min and then aged at 850 °C (BCA treatment). Under the present heat-treatment conditions, the phase constitution was primarily O+α 2. A very fine Widmanstatten microstructure was obtained after the DA treatment, while a microstructure with coarse O plates was obtained after the BCA treatment. The tensile properties were investigated at 20 °C to 950 °C, and the creep behavior was investigated at 650 °C to 750 °C/90 to 380 MPa. The elongation to fracture at room temperature for the DA-treated tensile specimen was as high as 2.6 pct, despite the high Al content in this alloy. In comparison with the O+B2 ternary alloys, this alloy showed higher specific proof stress at temperatures over 800 °C and higher creep strength. The stress exponent and the apparent activation energy for creep were calculated. The fracture mechanism was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. R. Boyer, G. Welsch, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM International, Materials Park, OH, 1994, pp. 1011–28.
2. D. Banerjee, A.K. Gogia, T.K. Nandy, K. Muraleedharan, and R.S. Mishra: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 19–33.
3. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305–23.10.1007/s11661-999-0240-4 ↗
4. R.G. Rowe, D.G. Konitzer, A.P. Woodfield, and J.C. Chesnutt: Mater. Res. Soc. Symp. Proc., 1991, vol. 213, pp. 703–08.10.1557/PROC-213-703 ↗
5. H.A. Lipsitt, D. Shechtman, and R.E. Schafrik: Metall. Trans. A, 1980, vol. 11A, pp. 1369–75.10.1007/BF02653491 ↗
6. R.G. Rowe: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.W. Kim and R.R. Boyer, TMS, Warrendale, PA, 1991, pp. 387–98.
7. D. Banerjee: in Intermetallic Compounds—Principles and Practice, Vol. 2, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, New York, NY, 1995, pp. 91–131.
8. R.G. Rowe, D. Banerjee, K. Muraleedharan, M. Larsen, E.L. Hall, D.G. Konitzer, and A.P. Woodfield: Titanium ’92—Science and Technology, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 1259–66.
9. K. Muraleedharan, T.K. Nandy, and D. Banerjee: Intermetallics, 1995, vol. 3, pp. 187–99.10.1016/0966-9795(95)98930-7 ↗
10. H.T. Kestner-Weykamp, C.H. Ward, T.F. Broderick, and M.J. Kaufman: Scripta Mater., 1989, vol. 23, pp. 1697–1702.10.1016/0036-9748(89)90345-1 ↗
11. F. Tang, T. Awane, and M. Hagiwara: Scripta Mater., 2002, vol. 46, pp. 143–47.10.1016/S1359-6462(01)01211-8 ↗
12. C.J. Boehlert and D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2349–67.10.1007/s11661-999-0244-0 ↗
13. F. Tang, S. Nakazawa, and M. Hagiwara: Scripta Mater., 2000, vol. 43, pp. 1065–70.10.1016/S1359-6462(00)00526-1 ↗
14. S. Emura and M. Hagiwara: Titanium ’99—Science and Technology, I.V. Gorynin and S.S. Ushkov, eds., Central Research Institute of Structural Materials “Prometey”, Saint-Petersburg, Russia, 1999, pp. 298–305.
15. A.K. Gogia, D. Banerjee, and T.K. Nandy: Metall. Trans. A, 1990, vol. 21A, pp. 609–25.10.1007/BF02671933 ↗
16. A.K. Gogia, T.K. Nandy, D. Banerjee, T. Carisey, J.L. Strudel, and J.M. Franchet: Intermetallics, 1998, vol. 6, pp. 741–48.10.1016/S0966-9795(98)00044-2 ↗
17. J. Weertman: in Mechanics and Materials, M.A. Meyers, R.W. Armstrong, and H.O.K. Kirchner, eds., John Wiley & Sons, Inc., New York, NY, 1999, pp. 451–88.
18. Y. Kadoya and T. Goto: Iron Steer Inst. Jpn. Int., 1990, vol. 30, pp. 829–37.10.2355/isijinternational.30.829 ↗
19. F. Tang, S. Nakazawa, and M. Hagiwara: Mater. Sci. Engineer. A, 2002, vol. 325, pp. 194–201.10.1016/S0921-5093(01)01462-9 ↗
20. R.S. Mishra and D. Banerjee: Scripta Mater., 1990, vol. 24, pp. 1477–82.10.1016/0956-716X(90)90417-F ↗