Tension-Tension-Fatigue Behaviors of a Zr-Based Bulk-Metallic-Glass-Matrix Composite
Source abstract
Abstract
An improved tension-fatigue limit of 473 MPa is gained for Zr58.5Ti14.3Nb5.2Cu6.1Ni4.9Be11.0 bulk-metallic-glass-matrix composites (BMGMCs). High volume-fraction dendrites within the glass matrix induce increased effectiveness on the blunting and propagating resistance of the fatigue-crack tip. Each fine striation is created during one stress cycle on the basis of analysis of experiments and calculations. A distinguishingly decreased crack-growth rate for the BMGMCs, compared to the monolithic BMGs, prevails, due to the plastic deformation of the dendrites, evidenced by the synchrotron X-ray results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. M.K. Miller and P.K. Liaw: Bulk Metallic Glasses, Springer, New York, NY, 2007, pp. 18–20.
2. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–90.10.1038/nature06598 ↗
3. J.W. Qiao, A.C. Sun, E.W. Huang, Y. Zhang, P.K. Liaw, and C.P. Chuang: Acta Mater., 2011, vol. 59, pp. 4126–37.10.1016/j.actamat.2011.03.036 ↗
4. J.W. Qiao, Y. Zhang, and P.K. Liaw: Adv. Eng. Mater., 2008, vol. 10, pp. 1039–42.10.1002/adem.200800149 ↗
5. J.W. Qiao, S. Wang, Y. Zhang, P.K. Liaw, and G.L. Chen: Appl. Phys. Lett., 2009, vol. 94, p. 151905.10.1063/1.3118587 ↗
6. J.W. Qiao, Y. Zhang, P.K. Liaw, and G.L. Chen: Scripta Mater., 2009, vol. 61, pp. 1087–90.10.1016/j.scriptamat.2009.08.044 ↗
7. J.Y. Mann: Fatigue Materials, Melbourne University Press, Melbourne, 1967, pp. 1–5.
8. M. Flores, W.L. Johnson, and R.H. Dauskardt: Scripta Mater., 2003, vol. 49, pp. 1181–87.10.1016/j.scriptamat.2003.08.020 ↗
9. G.Y. Wang, P.K. Liaw, A. Peker, M. Freels, W.H. Peter, R.A. Buchanan, and C.R. Brooks: Intermetallics, 2006, vol. 14, pp. 1091–97.10.1016/j.intermet.2006.01.045 ↗
10. K. Boopathy, D.C. Hofmann, W.L. Johnson, and U. Ramamurty: J. Mater. Res., 2009, vol. 24, pp. 3611–19.10.1557/jmr.2009.0439 ↗
11. M.E. Launey, D.C. Hofmann, W.L. Johnson, and R.O. Ritchie: Proc. Nat. Acad. Sci. USA, 2009, vol. 106, pp. 4986–91.10.1073/pnas.0900740106 ↗
12. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12, pp. 885–92.10.1016/j.intermet.2004.02.043 ↗
13. G.Y. Wang, P.K. Liaw, A. Smyth, M. Denda, A. Peker, M. Freels, R.A. Buchanan, and C.R. Brooks: Rev. Adv. Mater. Sci., 2008, vol. 18, pp. 18–22.
14. G.Y. Wang, P.K. Liaw, and M.L. Morrison: Intermetallics, 2009, vol. 17, pp. 579–90.10.1016/j.intermet.2009.01.017 ↗
15. J.W. Qiao, Y. Zhang, P. Feng, Q.M. Zhang, and G.L. Chen: Mater. Sci. Eng. A, 2009, vol. 515, pp. 141–45.10.1016/j.msea.2009.02.043 ↗
16. M.E. Launey, D.C. Hofmann, J.-Y. Suh, H. Kozachkov, W.L. Johnson, and R.O. Ritchie: Appl. Phys. Lett., 2009, vol. 94, p. 241910.10.1063/1.3156026 ↗
17. G.Y. Wang, P.K. Liaw, Y. Yokoyama, A. Inoue, and C.T. Liu: Mater. Sci. Eng. A, 2008, vol. 494, pp. 314–23.10.1016/j.msea.2008.04.034 ↗
18. P.C. Paris and F. Erdogan: J. Basic Eng., 1963, vol. 85, pp. 528–34.10.1115/1.3656900 ↗
19. H. Nisitani and D.H. Chen: Trans. Jpn. Soc. Mech. Eng., 1984, vol. 50, pp. 1077–82.10.1299/kikaia.50.1077 ↗
20. G.Y. Wang, P.K. Liaw, X.Q. Jin, Y. Yokoyama, E.W. Huang, F. Jiang, L.M. Keer, and A. Inoue: unpublished research, 2011.