journal article·2014-01

Phase Structure and High-Temperature Mechanical Properties of Two-Phase Fe-25Al-xZr Alloys Compared to Three-Phase Fe-30Al-xZr Alloys

Pavel Kejzlar, Petr Kratochvíl, Robert Král, Věra Vodičková

Publisher page

Abstract

The structure and high-temperature mechanical properties of Fe-30 at. pct Al and Fe-25 at. pct Al alloys with various Zr contents are compared. The scanning electron microscope images in chemical contrast mode (R-BSE) as well as EDS, EBSD, and X-ray diffraction were used to determine the structure and phase composition. The as-cast alloys (both Fe-30Al and Fe-25Al) were observed to be two-phase DO3/B2 + Laves phase λ 1 (Fe,Al)2Zr alloys with typical fine lamellar eutectic areas. During the heat treatment of the Fe-25Al alloys, their structure transformed from a DO3/B2 matrix with fine lamellar eutectic into λ 1 globular particles situated in a DO3/B2 matrix. The same structure of Fe-30Al alloys decomposed into three phases: λ 1 and τ 1 Zr(Fe,Al)12 particles in a DO3/B2 matrix. The hardening in both groups of alloys (Fe-25Al and Fe-30Al) due to the presence of Zr-containing λ 1 and τ 1 phases is compared.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. C.G. McKamey, J.H. DeVan, P.F. Tortorelli and V.K. Sikka: J. Mater. Res., 1991, vol. 6, pp. 1779-1804.10.1557/JMR.1991.1779 ↗
2. N.S. Stoloff and C.T. Liu: Microstructure and Properties of Materials, vol. 2, J.C.M. Li, ed., World Scientific Publishing Co. Ltd., Singapore, 2000, pp. 139–176.10.1142/9789812793959_0003 ↗
3. S.C. Deevi and V.K. Sikka: Intermetallics, 1996, vol. 4, pp. 357-375.10.1016/0966-9795(95)00056-9 ↗
4. D.G. Morris: Intermetallics, 1998, vol. 6, pp. 753-758.10.1016/S0966-9795(98)00028-4 ↗
5. M. Palm: Intermetallics, 2005, vol. 13, pp. 1286-1295.10.1016/j.intermet.2004.10.015 ↗
6. A. Schneider, L. Falat, G. Sauthoff and G. Frommeyer: Intermetallics, 2003, vol. 11, pp. 443-450.10.1016/S0966-9795(03)00018-9 ↗
7. L. Falat, A. Schneider, G. Sauthoff and G. Frommeyer: Intermetallics, 2005, vol. 13, pp. 1256-1262.10.1016/j.intermet.2004.05.010 ↗
8. C.G. McKamey and P.J. Maziasz: Intermetallics, 1998, vol. 6, pp. 303-314.10.1016/S0966-9795(97)00104-0 ↗
9. F. Stein, G. Sauthoff and M. Palm: Ztschr. Metallkd., 2004, vol. 95, pp. 465-485.10.3139/146.017985 ↗
10. A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, K. Sztwiertnia and G. Sauthoff: Mat. Sci. Eng. A, 2004, vol. 380, pp. 9-19.10.1016/j.msea.2004.04.005 ↗
11. A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, G. Sauthoff and U. Messerschmidt: Mat. Sci. Eng. A, 2004, vol. 381, pp. 1-15.10.1016/j.msea.2004.04.039 ↗
12. F. Stein, M. Palm and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1275-1285.10.1016/j.intermet.2004.08.013 ↗
13. D.G. Morris, M.A. Munoz-Morris and L.M. Requejo: Acta Mater., 2006, vol. 54, pp. 2335-2341.10.1016/j.actamat.2006.01.008 ↗
14. P. Kratochvíl, P. Kejzlar, R. Král and V. Vodičková: Intermetallics, 2012, vol. 20, pp. 39-46.10.1016/j.intermet.2011.08.007 ↗
15. F. Stein. M. Palm and G. Sauthoff : Intermetallics, 2004, vol. 12, pp. 713-720.10.1016/j.intermet.2004.02.010 ↗
16. F. Stein, M. Palm and G. Sauthoff: Intermetallics 2005, vol. 13, pp. 1056-1074.10.1016/j.intermet.2004.11.001 ↗
17. P. Kejzlar: unpublished data.
18. M. Palm: J. Alloys Comp., 2009, vol. 475, pp. 173-177.10.1016/j.jallcom.2008.07.036 ↗
19. D.G. Morris and M.A.Munoz-Morris: Mat. Sci. Eng. A, 2012, vol. 552, pp. 134-144.10.1016/j.msea.2012.05.022 ↗
20. P. Kratochvíl, F. Dobeš, J. Pešička, P. Málek, J. Buršík, V. Vodičková and P. Hanus: Mat. Sci. Eng. A, 2012, vol. 548, pp. 175-182.10.1016/j.msea.2012.03.103 ↗
21. D.G. Morris, M.A. Muñoz-Morris, L.M. Requejo and C. Baudin: Intermetallics, 2006, vol. 13, pp. 1204-1207.10.1016/j.intermet.2005.10.015 ↗
22. S. Milenkovic and M. Palm: Intermetallics, 2008, vol. 16, pp. 1212-1218.10.1016/j.intermet.2008.07.007 ↗
23. A. Hotař, M. Palm, P. Kratochvíl, V. Vodičková and S. Daniš: Corr. Sci., 2012, vol. 63, pp. 71-81.10.1016/j.corsci.2012.05.027 ↗