journal article·2011-07

Development of Ni-Al2O3 In-Situ Nanocomposite by Reactive Milling and Spark Plasma Sintering

V. Udhayabanu, K. R. Ravi, K. Murugan, D. Sivaprahasam, B. S. Murty

Publisher page

Abstract

In the present study, Ni-30 vol pct Al2O3in-situ nanocomposite was developed by reactive milling of NiO-Al-Ni powder mixture followed by spark plasma sintering (SPS). During milling, fcc to hcp transformation was observed in Ni(Al) phase and it transformed back to fcc phase around 773 K (500 °C). The hardness and yield strength of Ni-30 vol pct Al2O3 nanocomposite are approximately two times higher than that of pure Ni of similar grain size. The improved mechanical properties of nanocomposite are attributed to the presence of alumina particles of nanometer size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. S.C. Tjong and Z.Y. Ma: Mater. Sci. Eng., 2000, vol. 29R, pp. 49–113.10.1016/S0927-796X(00)00024-3 ↗
2. B.S. Murty and S. Ranganathan: Int. Mater. Rev., 1998, vol. 43, pp. 101–41.10.1179/imr.1998.43.3.101 ↗
3. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
4. P.K. Sinha, N. Dhananjayan, and H.K. Chakrabarti: Plating, 1973, vol. 60, pp. 55–59.
5. B. Muller and H. Ferkel: Mater. Sci. Forum, 2000, vols. 343–346, pp. 476–81.10.4028/www.scientific.net/MSF.343-346.476 ↗
6. M.E. Bahrololoom and R. Sani: Surf. Coat. Technol., 2005, vol. 192, pp. 154–63.10.1016/j.surfcoat.2004.09.023 ↗
7. A. Jung, H. Natter, R. Hempelmann, and E. Lach: J. Mater. Sci., 2009, vol. 44, pp. 2725–35.10.1007/s10853-009-3330-1 ↗
8. S.T. Aruna, C.N. Bindu, V.E. Selvi, V.K.W. Grips, and K.S. Rajam: Surf. Coat. Technol., 2006, vol. 200, pp. 6871–80.10.1016/j.surfcoat.2005.10.035 ↗
9. L. Benea: Mater. Manuf. Processes, 1999, vol. 14, pp. 231–42.10.1080/10426919908914820 ↗
10. P.A. Gay, P. Bercot, and J. Pagetti: Surf. Coat. Technol., 2001, vol. 140, pp. 147–54.10.1016/S0257-8972(01)01043-X ↗
11. A. Moller and H. Hahn: Nanostruct. Mater., 1999, vol. 12, pp. 259–62.10.1016/S0965-9773(99)00112-9 ↗
12. M.N. Joshi and M. Totalani: J. Electrochem. Soc. India, 1979, vol. 28, pp. 35–40.
13. G.N.K.R. Babu, V.S. Muralidharan, and K.I. Vasu: Plat. Surf. Finish., 1991, vol. 78, pp. 126–33.
14. V. Medeliene, R. Juskenas, and M. Kurtinaitiene: Pol. J. Chem., 2004, vol. 78, pp. 1305–17.
15. M. Kaisheva and J. Fransaer: J. Electrochem. Soc., 2004, vol. 151C, pp. 89–96.10.1149/1.1632479 ↗
16. K.M. Ibrahim, A.A. Aal, and Z.A. Hamid: Int. J. Cast Met. Res., 2005, vol. 18, pp. 315–20.10.1179/136404605225023090 ↗
17. F. Hu and K.C. Chan: Appl. Surf. Sci., 2004, vol. 233, pp. 163–71.10.1016/j.apsusc.2004.03.013 ↗
18. M. Surender, R. Balasubramaniam, and B. Basu: Surf. Coat. Technol., 2004, vol. 187, pp. 93–97.10.1016/j.surfcoat.2004.01.030 ↗
19. M. Stroumbouli, P. Gyftou, and E.A. Pavlatou: Surf. Coat. Technol., 2005, vol. 195, pp. 325–32.10.1016/j.surfcoat.2004.06.034 ↗
20. M. Surender, B. Basu, and R. Balasubramaniam: Proc. Int. Conf on Advances in Surface Treatment: Research & Applications (ASTRA), ASM international, Metal Park, OH, 2004, pp. 130–34.
21. J.L. Endrino, J.J. Nainaparampil, and J.E. Krzanowski: Surf. Coat. Technol., 2002, vol. 157, pp. 95–101.10.1016/S0257-8972(02)00138-X ↗
22. S. Eroglu and B. Gallois: J. Mater. Sci., 1995, vol. 30, pp. 1754–59.10.1007/BF00351606 ↗
23. S.H. Goods, T.E. Buchheit, R.P. Janek, J.R. Michael, and P.G. Kotula: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2351–60.10.1007/s11661-006-0215-7 ↗
24. T.H. De Keijser, J.I. Langford, E.J. Mittemeijer, and A.B.P. Vogel: J. Appl. Cryst., 1982, vol. 15, pp. 308–14.10.1107/S0021889882012035 ↗
25. V. Udhayabanu, K.R. Ravi, V. Vinod, and B.S. Murty: Intermetallics, 2010, vol. 18, pp. 353–58.10.1016/j.intermet.2009.08.006 ↗
26. V. Udhayabanu, Navneet Singh, and B.S. Murty: J. Alloys Compd., 2010, vol. 497, pp. 142–46.10.1016/j.jallcom.2010.03.089 ↗
27. M.K. Datta, S.K. Pabi, and B.S. Murty: J. Mater. Res., 2000, vol. 15, pp. 1429–32.10.1557/JMR.2000.0206 ↗
28. G.D. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, and R.W. Armstrong: Scripta Mater., 1986, vol. 20, pp. 93–97.10.1016/0036-9748(86)90219-X ↗
29. A.M. El-Sherik, U. Erb, G. Palumbo, and K.T. Aust: Scripta Mater., 1997, vol. 22, pp. 1185–88.
30. F. Ebrahimi, G.R. Bourne, M.S. Kelly, and T.E. Matthews: Nanostruct. Mater., 1999, vol. 11, pp. 343–50.10.1016/S0965-9773(99)00050-1 ↗
31. C.A. Schuh, T.G. Nieh, and T. Yamasaki: Scripta Mater., 2002, vol. 46, pp. 735–40.10.1016/S1359-6462(02)00062-3 ↗
32. L. Chang, P.W. Kao, and C.H. Chen: Scripta Mater., 2007, vol. 56, pp. 713–16.10.1016/j.scriptamat.2006.12.036 ↗
33. D.G. Morris, I. Gutierrez-Urrutia, and M.A. Munoz-Morris: Scripta Mater., 2007, vol. 57, pp. 369–72.10.1016/j.scriptamat.2007.05.009 ↗
34. F.J. Humphreys, S.I. Anderson, H. Lilholt, and O.B. Pedersen: 9th Risø Int. Symp. on Metallurgy and Materials Science, Risø National Laboratory, Røskilde, Denmark, 1988, pp. 51–74.
35. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
36. M.R. Piggot: Load Bearing Fibre Composites, Pergamon Press, Oxford, United Kingdom, 1980.
37. N. Ramakrishnan: Acta Metall., 1996, vol. 44, pp. 69–77.
38. H.W. Zhang, R. Gopalan, T. Mukai, and K. Hono: Scripta Mater., 2005, vol. 53, pp. 863–68.10.1016/j.scriptamat.2005.05.039 ↗
39. N. Hansen: Acta Metall., 1977, vol. 25, pp. 863–68.10.1016/0001-6160(77)90171-7 ↗
40. R.J. Arsenault, L. Wang, and C.R. Feng: Acta Metall. Mater., 1991, vol. 39, pp. 47–57.10.1016/0956-7151(91)90327-W ↗
41. R.J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, pp. 175–87.10.1016/0025-5416(86)90261-2 ↗
42. L.M. Brown and W.M. Stobbs: Phil. Mag., 1976, vol. 34, pp. 351–72.10.1080/14786437608222028 ↗
43. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, New York, NY, 1993.10.1017/CBO9780511623080 ↗
44. K.H. Zuo, D.L. Jiang, and Q.L. Lin: Mater. Lett., 2006, vol. 60, pp. 1265–68.10.1016/j.matlet.2005.11.010 ↗
45. S. Schicker, D.E. Garcia, J. Bruhn, R. Janssen, and N. Claussen: J. Am. Ceram. Soc., 1997, vol. 80, pp. 2294–300.10.1111/j.1151-2916.1997.tb03120.x ↗
46. M.A. Munoz-Morris, C. Garcia Oca, and D.G. Morris: Acta Mater., 2002, vol. 50, pp. 2825–36.10.1016/S1359-6454(02)00101-5 ↗
47. S.H. Goods and L.M. Brown: Acta Metall., 1979, vol. 27, pp. 1–15.10.1016/0001-6160(79)90051-8 ↗
48. S.H. Goods and W.D. Nix: Acta Metall., 1978, vol. 26, pp. 739–52.10.1016/0001-6160(78)90024-X ↗
49. R. Raj: Flow and Fracture at Elevated Temperatures, ASM, Metals Park, OH, 1985.
50. H. Reidel: Fracture at High Temperatures, Springer-Verlag, New York, NY, 1986.
51. S. Yotte, D. Breysse, J. Riss, and S. Ghosh: Mater. Characterization, 2001, vol. 46, pp. 211–19.10.1016/S1044-5803(01)00126-7 ↗