Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression
Source abstract
Abstract
This article presents the deformation behavior of high-strength pearlitic steel deformed by triaxial compression to achieve ultra-fine ferrite grain size with fragmented cementite. The consequent evolution of microstructure and texture has been studied using scanning electron microscopy, electron back-scatter diffraction, and X-ray diffraction. The synergistic effect of diffusion and deformation leads to the uniform dissolution of cementite at higher temperature. At lower temperature, significant grain refinement of ferrite phase occurs by deformation and exhibits a characteristic deformation texture. In contrast, the high-temperature deformed sample shows a weaker texture with cube component for the ferrite phase, indicating the occurrence of recrystallization. The different mechanisms responsible for the refinement of ferrite as well as the fragmentation of cementite and their interaction with each other have been analyzed. Viscoplastic self-consistent simulation was employed to understand deformation texture in the ferrite phase during triaxial compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. H. Gleiter: Progr. Mater. Sci., 1989, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
3. A. Belyakov, T. Sakai, H. Miura, and K. Tsuzaki: Philos. Mag., 2001, vol. A81, pp. 2629–43.10.1080/01418610108216659 ↗
4. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki: Acta Mater., 2002, vol. 50, pp. 1547–57.10.1016/S1359-6454(02)00013-7 ↗
5. O. Sitdikov, T. Sakai, A. Goloborodko, H. Miura, and R. Kaibyshev: Scripta Mater., 2004, vol. 51, pp. 175–79.10.1016/j.scriptamat.2004.02.034 ↗
6. S. Ringeval, D. Piot, C. Desrayaud, and J.H. Driver: Acta Mater., 2006, vol. 54, pp. 3095–3105.10.1016/j.actamat.2006.02.047 ↗
7. A.K. Padap, G.P. Chaudhari, S.K. Nath, and V. Pancholi: Mater. Sci. Eng. A, 2009, vol. A527, pp. 110–17.10.1016/j.msea.2009.08.066 ↗
8. A. Bhowmik, S. Biswas, S.S. Dhinwal, A. Sarkar, R.K. Ray, D. Bhattacharjee, and S. Suwas: Mater. Sci. Forum, 2012, vol. 702–703, pp. 774–77.
9. N. Maruyama, T. Tarui, and H. Tashiro: Scripta Mater., 2002, vol. 46, pp. 599–603.10.1016/S1359-6462(02)00037-4 ↗
10. T. Furuhala, T. Mizoguchi, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 392–98.10.2355/isijinternational.45.392 ↗
11. K. Pawlik: Phys. Stat. Sol., 1986, vol. B134, pp. 477–83.10.1002/pssb.2221340205 ↗
12. M. Zidani, S. Messaoudi, T. Baudin, D. Solas, and M.H. Mathon: Int. J. Mater. Forum, 2010, vol. 3, pp. 7–11.10.1007/s12289-009-0410-3 ↗
13. R.A. Lebensohn and C.N. Tome: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
14. C.N. Tome, G.R. Canova, and U.F. Kocks: Acta Metall., 1984, vol. 32, pp. 1637–53.10.1016/0001-6160(84)90222-0 ↗
15. V.N. Gridnev and V.G. Gavrilyuk: Phys. Metals, 1982, vol. 4, pp. 531–51.
16. V.G. Gavriljuk: Mater. Sci. Eng. A, 2003, vol. 345A, pp. 81–89.10.1016/S0921-5093(02)00358-1 ↗
17. J. Languillaume, G. Kapelski, and B. Baudelet: Acta Mater., 1997, vol. 45, pp. 1201–12.10.1016/S1359-6454(96)00216-9 ↗
18. X. Sauvage, J. Copreaux, F. Danoix, and D. Blavette: Phil. Mag., 2000, vol. A80, pp. 781–96.10.1080/01418610008212082 ↗
19. L. Li, W. Yang, and Z. Sun: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 624–35.10.1007/s11661-007-9447-4 ↗
20. W. Lojkowski, M. Djahanbaksh, G. Burkle, S. Gierlotka, W. Zielinski, and H.J. Fecht: Mater. Sci. Eng. A, 2001, vol. 303A, pp. 197–208.10.1016/S0921-5093(00)01947-X ↗
21. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
22. A.Y. Badmos and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2189–94.10.1007/s11661-997-0176-5 ↗
23. Y. Ivanisenko, W. Lojkowski, R.Z. Valiev, and H.J. Fecht: Acta Mater., 2003, vol. 51, pp. 5555–70.10.1016/S1359-6454(03)00419-1 ↗
24. L. Storojeva, D. Ponge, R. Kaspar, and D. Raabe: Acta Mater., 2004, vol. 52, pp. 2209–20.10.1016/j.actamat.2004.01.024 ↗
25. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, 2nd ed., Chapman & Hall, London, UK, 1984.
26. M. Zelin: Acta Mater., 2002, vol. 50, pp. 4431–47.10.1016/S1359-6454(02)00281-1 ↗
27. A. Inoue, T. Ogura, and T. Masumoto: Metall. Trans. A, 1977, vol. A8, pp. 1689–95.10.1007/BF02646871 ↗
28. M. Perez: Scripta Mater., 2005, vol. 52, pp. 709–12.10.1016/j.scriptamat.2004.12.026 ↗
29. S. Chattopadhyay and C.M. Sellars: Acta Metall., 1982, vol. 30, pp. 157–70.10.1016/0001-6160(82)90055-4 ↗
30. R.K. Abu Al-Rub and G.Z. Voyiadjis: Int. J. Plast., 2006, vol. 22, pp. 654–84.10.1016/j.ijplas.2005.04.010 ↗
31. J.G. Selvillano: Mater. Sci. Eng., 1975, vol. 21, pp. 221–25.10.1016/0025-5416(75)90218-9 ↗
32. A. Bhowmik, S. Biswas, S. Suwas, R.K. Ray, and D. Bhattacharjee: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2729–42.10.1007/s11661-009-9939-5 ↗
33. Y. Zhong, F. Yin, T. Sakaguchi, K. Nagai, and K. Yang: Acta Mater., 2007, vol. 55, pp. 2747–56.10.1016/j.actamat.2006.12.012 ↗
34. V. Vitek, D.A. Smith, and R.C. Pond: Philos. Mag., 1980, vol. 41A, pp. 649–63.10.1080/01418618008239340 ↗