Na Partitioning During Thermomechanical Processing of an Mg-Sn-Zn-Na Alloy
Source abstract
Abstract
Microstructural characterization was used to examine the changes that occur in an Mg-6Sn-5Zn-0.3Na alloy from casting to extrusion at either 623 K or 723 K (350 °C or 450 °C) followed by artificial aging at 473 K (200 °C). In particular, the partitioning of Na was examined at each step using STEM-EDS mapping. Na atoms were found to preferentially partition to the Mg-Zn phase when present. After extrusion, when no Mg-Zn was observed, the spherical Mg2Sn particles were found to be enriched in Na, particularly at the higher extrusion temperature. Artificial aging following extrusion resulted in a change in Na partitioning, and a coarse distribution of Mg-Zn precipitate rods. Na microadditions led to a high as-extruded hardness, but a significant tension–compression yield asymmetry was still observed at room temperature. The compressive yield strength was found to decrease significantly after 1000 hours of aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J.F. Nie, Metallurgical and Materials Transactions A, 43 (2012) 3891-3939.10.1007/s11661-012-1217-2 ↗
2. M.A. Meyers and K.K. Chawla: in Mechanical Behavior of Materials, Prentice-Hall, Inc., Upper Saddle River, NJ, 1999, pp. 463–96.
3. A.A. Nayeb-Hashemi, J.B. Clark, Phase Diagrams of Binary Magnesium Alloy, ASM International, Materials Park, OH, 1988.
4. P. Villars, L.D. Calver, Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 2nd ed., ASM International, Materials Park, OH, 1991.
5. J. van der Planken, Journal of Materials Science, 4 (1969) 927-929.10.1007/BF00549785 ↗
6. G. Derge, A.R. Kommel, and R.F. Mehl: in Transactions of the American Institute of Mining and Metallurgical Engineers, American Institute of Mining and Metallurgical Engineers, Pamphlet 1937, pp. 367–78.
7. C.L. Mendis, C.J. Bettles, M.A. Gibson, C.R. Hutchinson, Materials Science and Engineering A, 435-436 (2006) 163-171.10.1016/j.msea.2006.07.090 ↗
8. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, K. Hono, Scripta Materialia, 55 (2006) 251-254.10.1016/j.scriptamat.2006.04.005 ↗
9. H.-T. Son, J.-B. Lee, H.-G. Jeong, T.J. Konno, Materials Letters, 65 (2011) 1966-1969.10.1016/j.matlet.2011.03.083 ↗
10. T.T. Sasaki, K. Yamamoto, T. Honma, S. Kamado, K. Hono, Scripta Materialia, 59 (2008) 1111-1114.10.1016/j.scriptamat.2008.07.042 ↗
11. T.T. Sasaki, J.D. Ju, K. Hono, K.S. Shin, Scripta Materialia, 61 (2009) 80-83.10.1016/j.scriptamat.2009.03.014 ↗
12. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, K. Hono, Materials Science and Engineering A, 530 (2011) 1-8.10.1016/j.msea.2010.05.010 ↗
13. S. Harosh, L. Miller, G. Levi, M. Bamberger, Journal of Materials Science, 42 (2007) 9983-9989.10.1007/s10853-007-2059-y ↗
14. W.L. Cheng, S.S. Park, W.N. Tang, B.S. You, and B.H. Koo: Trans. Nonferrous Met. Soc. China (English ed.), 2010, vol. 20, pp. 2246–52.10.1016/S1003-6326(10)60636-X ↗
15. M.A. Gibson, X. Fang, C.J. Bettles, C.R. Hutchinson, Scripta Materialia, 63 (2010) 899-902.10.1016/j.scriptamat.2010.07.002 ↗
16. C.L. Mendis, C.J. Bettles, M.A. Gibson, S. Gorsse, C.R. Hutchinson, Philosophical Magazine Letters, 86 (2006) 443-456.10.1080/09500830600871186 ↗
17. J. Geng, X. Gao, X.Y. Fang, J.F. Nie, Scripta Materialia, 64 (2011) 506-509.10.1016/j.scriptamat.2010.11.027 ↗
18. X. Gao, J.F. Nie, Scripta Materialia, 56 (2007) 645-648.10.1016/j.scriptamat.2007.01.006 ↗
19. A. Singh, A.P. Tsai, Scripta Materialia, 57 (2007) 941-944.10.1016/j.scriptamat.2007.07.028 ↗
20. J.S. Chun, J.G. Byrne, Journal of Materials Science, 4 (1969) 861-872.10.1007/BF00549777 ↗
21. L.Y. Wei, G.L. Dunlop, H. Westengen, Metallurgical and Materials Transactions A, 26A (1995) 1705-1716.10.1007/BF02670757 ↗
22. J.B. Clark, Acta Metallurgica, 13 (1965) 1281-1289.10.1016/0001-6160(65)90039-8 ↗
23. L. Sturkey, J.B. Clark, Journal of the Institute of Metals, 88 (1959) 177-181.
24. A. Singh, J.M. Rosalie, H. Somekawa, and T. Mukai: in Magnesium Technology, S.R. Agnew, N.R. Neelameggham, E. Nyberg, and W. Sillekens, eds., TMS, Seattle, WA, 2010, pp. 323–27.
25. J.M. Rosalie, H. Somekawa, A. Singh, T. Mukai, Philosophical Magazine, 90 (2010) 3355-3374.10.1080/14786435.2010.484659 ↗
26. A. Singh, J.M. Rosalie, H. Somekawa, T. Mukai, Philosophical Magazine Letters, 90 (2010) 641-651.10.1080/09500839.2010.490049 ↗
27. S. Henes, V. Gerold, Zeitschrift fuer Metallkunde, 53 (1962) 743-748.
28. F.R. Elsayed, T.T. Sasaki, C.L. Mendis, T. Ohkubo, K. Hono, Scripta Materialia, 68 (2013) 797-800.10.1016/j.scriptamat.2013.01.032 ↗
29. I.L. Dillamore, W.T. Roberts, Metallurgical Reviews, 10 (1965) 271 - 380.10.1179/095066065790138348 ↗
30. J. Bohlen, S.B. Yi, J. Swiostek, D. Letzig, H.G. Brokmeier, K.U. Kainer, Scripta Materialia, 53 (2005) 259-264.10.1016/j.scriptamat.2005.03.036 ↗
31. J. Bohlen, S.B. Yi, D. Letzig, K.U. Kainer, Materials Science and Engineering A, 527 (2010) 7092-7098.10.1016/j.msea.2010.07.081 ↗
32. M.R. Barnett, Materials Science and Engineering A, 464 (2007) 1-7.10.1016/j.msea.2006.12.037 ↗
33. J.R. TerBush, M. Setty, N. Stanford, M.R. Barnett, A.J. Morton, and J.F. Nie: 9th Int. Conf. Magnes. Alloys Appl., Vancouver, BC, Canada, 2012, pp. 579–86.
34. N. Stanford, J.R. TerBush, M. Setty, M.R. Barnett, Metallurgical and Materials Transactions A, 44 (2013) 2466-2469.10.1007/s11661-013-1712-0 ↗
35. A.D. Pelton, Bull. Alloy Phase Diagrams, 5 (1984) 454-456.
36. H. Okamoto, Desk Handbook: Phase Diagrams for Binary Alloys, 2nd ed., ASM International, Materials Park, OH, 2010.
37. X. Gao, J.F. Nie, Scripta Materialia, 57 (2007) 655-658.10.1016/j.scriptamat.2007.06.005 ↗
38. H. Somekawa, A. Singh, T. Mukai, Scripta Materialia, 60 (2009) 411-414.10.1016/j.scriptamat.2008.11.017 ↗
39. H. Somekawa, A. Singh, T. Mukai, Journal of Materials Research, 22 (2006) 965-973.10.1557/jmr.2007.0112 ↗
40. N. Stanford, M.R. Barnett, Materials Science and Engineering A, 496 (2008) 399-408.10.1016/j.msea.2008.05.045 ↗
41. M.R. Barnett, Scripta Materialia, 59 (2008) 696-698.10.1016/j.scriptamat.2008.05.027 ↗