Microstructure Size Control through Cooling Rate in Thermoelectric PbTe-Sb2Te3 Composites
Source abstract
Abstract
Microstructures of alloys with three compositions in the pseudobinary PbTe-Sb2Te3 system cast in copper molds using the injection molding technique were examined by scanning electron microscopy (SEM), energy-dispersive spectrometry, and X-ray diffraction (XRD). The microstructural length scales such as interlamellar spacing (ILS) and secondary dendrite arm spacing vary over two orders of magnitude, e.g., from 0.2 to 20 μm for SDAS in the hypereutectic alloy, depending on injection pressure, distance from surface, or thickness. The decrease in the microstructural length scale with the decrease in distance from the surface, thickness, and increase in injection pressure is attributed to an increase in the cooling rates estimated using the heat-transfer theory in solids. The difference in the injection pressures is represented as the difference in the heat-transfer coefficients.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. L.E. Bell: Science, 2008, vol. 321, pp. 1457–61.10.1126/science.1158899 ↗
2. C.B. Vining: Nat. Mater., 2009, vol. 8, pp. 83–85.10.1038/nmat2361 ↗
3. R. Venkatasubramanian, E. Siivola, T. Colpitts, and B. O’Quinn: Nature, 2001, vol. 413, pp. 597–602.10.1038/35098012 ↗
4. T.C. Harman, P.J. Taylor, M.P. Walsh, and B.E. LaForge: Science, 2002, vol. 297, pp. 2229–32.10.1126/science.1072886 ↗
5. G. Chen: 9th Intersoc. Conf. on Thermal and Thermomechanical Phenomena In Electronic Systems, IEEE Cat. No. 04CH37543, 2004, p. 8.
6. K.F. Hsu, S. Loo, F. Guo, W. Chen, J.S. Dyck, C. Uher, T. Hogan, E.K. Polychroniadis, and M.G. Kanatzidis: Science, 2004, vol. 303, pp. 818–21.10.1126/science.1092963 ↗
7. D.L. Medlin and G.J. Snyder: Curr. Opin. Coll. Int. Sci., 2009, vol. 14 (4), pp. 226–35.10.1016/j.cocis.2009.05.001 ↗
8. T. Ikeda, S.M. Haile, V.A. Ravi, H. Azizgolshani, F. Gascoin, and G.J. Snyder: Acta Mater., 2007, vol. 55, pp. 1227–39.10.1016/j.actamat.2006.09.036 ↗
9. T. Ikeda, L.A. Collins, V.A. Ravi, F.S. Gascoin, S.M. Haile, and G.J. Snyder: Chem. Mater., 2007, vol. 19, pp. 763–67.10.1021/cm062121p ↗
10. T. Ikeda, V.A. Ravi, L.A. Collins, S.M. Haile, and G.J. Snyder: J. Electron. Mater., 2007, vol. 37, pp. 716–20.10.1007/s11664-007-0175-8 ↗
11. T. Ikeda, V.A. Ravi, and G.J. Snyder: Acta Mater., 2009, vol. 57, pp. 666–72.10.1016/j.actamat.2008.10.005 ↗
12. T. Ikeda, E.S. Toberer, V.A. Ravi, S.M. Haile, and G.J. Snyder: 26th Int. Conf. on Thermoelectrics, 2007.
13. N.K. Abrikosov, E.I. Elagina, and M.A. Popova: Inorg. Mater., 1965, vol. 1, pp. 1944–46.
14. T. Ikeda, V.A. Ravi, and G.J. Snyder: unpublished research.
15. P.E.J. Flewitt and R.K. Wild: Physical Methods for Materials Characterization, Institute of Physics Publishing, Bristol, United Kingdom, 1994, p. 283.
16. L.E. Shelimova, O.G. Karpinskii, T.E. Svechnikova, E.S. Avilov, M.A. Kretova, and V.S. Zemskov: Inorg. Mater., 2004, vol. 40, pp. 1264–70.10.1007/s10789-005-0069-1 ↗
17. H.S. Carslaw, and J.C. Jaeger: Conduction of Heat in Solids, Clarendon, Oxford, United Kingdom, 1959, p. 122.
18. D.R. Poirier and E.J. Poirier: Heat Transfer Fundamentals, 1992, TMS, Warrendale, PA, p. 40.
19. E. Niiyama: Chuuzou Dennetsu Kougaku, Agne Gijutu Center, 2001, p. 210.
20. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 651–63.10.1007/s11663-997-0039-x ↗
21. B. Chalmers: Principle of Solidification, 1964, Wiley, New York, NY.