Determination of the isothermal sections of the Al-Ni-Si ternary system at 750 °C and 850 °C
Source abstract
Abstract
The phase equilibria of the Al-Ni-Si ternary system at 850 °C and 750 °C have been investigated using scanning electron microscopy (SEM) and electron-probe microanalysis (EPMA). Isothermal sections at 850 °C and 750 °C were constructed based on experimental data from 53 alloys heat treated at 850 °C for 1200 hours and at 750 °C for 1440 hours, respectively. The phase equilibria among the following intermetallics and solid-solution phases are described: Ll2-Ni3(Al,Si), B2-NiAl, Ni5Si2, δ-Ni2Si, ϑ-Ni2Si(τ 4), Ni3Si2, NiSi, NiSi2, Ni2Al3, NiAl3, Ni2AlSi(τ 2), Ni3Al6Si(τ 3), Ni16AlSi9(τ 5), the fcc solid solution, and the diamond (Si) phase. In addition, a phase, temporarily designated as Ni5(Al,Si)3(τ 6), was observed for the first time at both 750 °C and 850 °C. This phase is probably the stabilization of Ni5Al3 by Si to higher temperatures than the binary Ni5Al3, which is only stable at <∼700 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: X-ray Diffraction in Crystallography · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. M. Bonnet, J. Ronez, and R. Castanet: Thermochimica Acta, 1989, vol. 155, pp. 39–56.10.1016/0040-6031(89)87134-5 ↗
2. B. Otani and K.N. Kenkyu: Study Met., 1930, vol. 7, pp. 666–86.
3. H.W.L. Phillips: J. Inst. Met., London, 1942, vol. 68, pp. 27–46.
4. R.W. Guard and E.A. Smith: J. Inst. Met., 1959, vol. 88, pp. 369–70.
5. N.V. Herman: Ser. Khimichno, Visnik L’Vivs’Kogo Derzhavnogo Univ., 1981, vol. 23, pp. 61–64.
6. O.S. Zarechyuk, N.V. Herman, T.I. Yanson, R.M. Rykhal, and A.A. Muraveva: Fazovye. Ravnov. Met. Splavakh. Izd. Nauka, Moscow, 1981, pp. 69–73 (in Russian).
7. S. Ochiai, Y. Oya, and T. Suzuki: Bull. PME (TIT), 1983, vol. 52, pp. 1–16.
8. A. Mitsuhashi, Y. Mitshima, and T. Suzuki: Bull. PME (TIT), 1984, vol. 54, pp. 7–15.
9. G. Muralidharan, J.W. Richardson, Jr., J.E. Epperson, and H. Chen: Scripta Mater., 1997, vol. 36, pp. 543–49.10.1016/S1359-6462(96)00419-8 ↗
10. K.W. Richter: J. Alloys Compounds, 2002, vol. 338, pp. 43–50.10.1016/S0925-8388(02)00212-8 ↗
11. K.W. Richter and H. Ipser: Intermetallics, 2003, vol. 11, pp. 101–09.10.1016/S0966-9795(02)00184-X ↗
12. M. Jain and S.P. Gupta: Mater. Characterization, 2003, vol. 51, pp. 243–57.10.1016/j.matchar.2003.12.002 ↗
13. K.W. Richter, K. Chandrasekaran, and H. Ipser: Intermetallics, 2004, vol. 12, pp. 545–54.10.1016/j.intermet.2004.01.009 ↗
14. F. Bosselet, J.C. Viala, C. Colin, B.F. Mentzen, and J. Bouis: Mater. Sci. Eng., 1993, vol. A167, pp. 147–54.10.1016/0921-5093(93)90348-I ↗
15. P. Villars and L.D. Calvert: Pearsons Handbook of Crystallographic Data for Intermetallic Phases, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1991, vols. 1–4, pp. 948–4734.
16. K.W. Richter, Y. Prots, and Y. Grin: Z. Anorg. Allg. Chem., 2004, vol. 630, pp. 417–22.10.1002/zaac.200300316 ↗