Study of the Porosity in Plasma-Sprayed Alumina through an Innovative Three-Dimensional Simulation of the Coating Buildup
Source abstract
Abstract
Porosity is a key feature of a thermally sprayed coating microstructure. Within ceramic coatings, porosity is made of pores and cracks of various shapes, dimensions, and orientations. Cracks can be intralamellar or interlamellar due to the buildup of the coating, which leads to piled-up lamellae from impinging and the additional rapid solidification of liquid droplets. Pores are interconnected with cracks, which results in a three-dimensional (3-D) porosity network. Direct observation of this network is an intricate task and current attempts remain somewhat limited. A 3-D simulation of this network was, therefore, developed in this work, based on a stochastic approach to the building up of simulated lamellae in the sprayed microstructure. A library of mathematical objects was achieved from morphological measurements, using confocal microscopy of actual isolated flattened lamellae, i.e., “splats” and scanning electron microscopy (SEM). This stochastic approach to the simulation of hundreds of lamellae also involves the random distribution of cracks and pores. Simulation fit parameters were selected according to the overall characteristics of porosity (i.e., content, orientation, size, etc.) that were determined from the thorough quantitative image analysis (QIA) of cross-sectioned plasma-sprayed alumina coatings. Two plasma modes that varied the atmosphere in a controlled-atmosphere plasma spraying (CAPS) chamber were applied, to produce the microstructures of two different alumina coatings. The 3-D random modeling tool allowed the processing of a volume of digital material through a 3-D simulated binary image of a two-phased composite material. Using one 3-D image result of the simulation, finite element (FE) calculations were performed, in order to study the overall dielectric properties of a plasma-sprayed alumina as a function of porosity. The influence of anisotropy is discussed, in particular, and both analytical and numerical predicted values were compared to experimental ones. The presence of the defects related to both digital coatings is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. P. Bengtsson, T. Johannesson: J. Therm. Spray Technol., 1995, vol. 4, pp. 245–5110.1007/BF02646967 ↗
2. S. Ahmaniemi, M. Vippola, P. Vuoristo, T. Mäntylä, F. Cernuschi, L. Lutterotti: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2247–5810.1016/S0955-2219(03)00639-3 ↗
3. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, F. Machi: J. Eur. Ceram. Soc., 2006, vol. 26, pp. 3583–9710.1016/j.jeurceramsoc.2006.01.003 ↗
4. D. Jadhav, N.P. Padture, E.H. Jordan, M. Gell, P. Miranzo, E.R. Fuller: Acta Mater., 2006, vol. 54, pp. 3343–4910.1016/j.actamat.2006.03.024 ↗
5. N. Markocsan, P. Nylen, J. Wigren, X.H. Li: J. Therm. Spray Technol., 2007, vol. 16, pp. 498–50510.1007/s11666-007-9068-x ↗
6. S. Kuroda, T. Dendo, S. Kitahara: J. Therm. Spray Technol., 1995, vol. 4, pp. 75–8410.1007/BF02648531 ↗
7. S.H. Leigh, C.C. Berndt: J. Am. Ceram. Soc., 1999, vol. 82, pp. 17–2110.1111/j.1151-2916.1999.tb01717.x ↗
8. J. Li, A. Ohmori: J. Therm. Spray Technol., 2002, vol. 11, pp. 365–7410.1361/105996302770348754 ↗
9. A. Kulkarni, Z. Wang, T. Nakamura, S. Sampath, A. Goland, H. Herman, J. Allen, J. Ilavsky, G. Long, J. Frahm, R.W. Steinbrech: Acta Mater., 2003, vol. 51, pp. 2457–7510.1016/S1359-6454(03)00030-2 ↗
10. S. Deshpande, A. Kulkarni, S. Sampath, H. Herman: Surf. Coat. Technol., 2004, vol. 187, pp. 6–1610.1016/j.surfcoat.2004.01.032 ↗
11. P. Ctibor, R. Lechnerova, V. Benes: Mater. Charact., 2006, vol. 56, pp. 297–30410.1016/j.matchar.2005.11.016 ↗
12. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet: J. Therm. Spray Technol., 2006, vol. 15, pp. 765–7210.1361/105996306X147045 ↗
13. I. Sevostianov, and M. Kachanov: Mater. Sci. Eng., A, 2001, vol. 297, pp. 235–4310.1016/S0921-5093(00)01022-4 ↗
14. T. Nakamura, G. Qian, C.C. Berndt: J. Am. Ceram. Soc., 2000, vol. 83, pp. 578–8410.1111/j.1151-2916.2000.tb01236.x ↗
15. P. Michlik, C. Berndt: Surf. Coat. Technol., 2006, vol.201, pp. 2369–8010.1016/j.surfcoat.2006.04.003 ↗
16. Y. Tan, J.P. Longtin, S. Sampath: J. Therm. Spray Technol., 2006, vol. 15, pp. 545–5210.1361/105996306X147216 ↗
17. H. Hsueh, J.A. Haynes, M.J. Lance, P.F. Becher, M.K. Ferber, E.R. Fuller, S.A. Langer, W.C. Carter, W.R. Cannon: J. Am. Ceram. Soc., 1999, vol. 82, pp. 1073–7510.1111/j.1151-2916.1999.tb01878.x ↗
18. Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, H. Herman: Acta Mater., 2003, vol. 51, pp. 5319–3410.1016/S1359-6454(03)00390-2 ↗
19. G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini: Surf. Coat. Technol., 2006, vol. 201, pp. 458–7310.1016/j.surfcoat.2005.10.039 ↗
20. V. Cannillo, T. Manfredini, M. Montorsi, C. Siligardi, A. Sola: J. Am. Ceram. Soc., 2006, vol. 26, pp. 3067–7310.1016/j.jeurceramsoc.2005.10.003 ↗
21. R. Ghafouri-Azar, J. Mostaghimi, S. Chandra: Comput. Mater. Sci., 2006, vol. 35, pp. 13–2610.1016/j.commatsci.2005.02.007 ↗
22. E. Lugscheider, K. Bobzin, and R. Nickel: J. Therm. Spray Technol., 2006, vol. 15, pp. 537–4410.1361/105996306X147063 ↗
23. P. Ctibor, P. Hofman, P. Chraska, R. Lechnerova, V. Benes: Proc. Thermal Spray 2007: Global Coating Solutions, ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 878–83
24. P. Spanne, K.W. Jones, H. Herman, W.L. Riggs: J. Therm. Spray Technol., 1993, vol. 2, pp. 121–2510.1007/BF02652018 ↗
25. J. Ilavsky, G.G. Long, A.J. Allen, C.C. Berndt: Mater. Sci. Eng., A, 1999, vol. 272, pp. 215–2110.1016/S0921-5093(99)00450-5 ↗
26. A. Kulkarni, J. Gutleber, S. Sampath, A. Goland, W.B. Lindquist, H. Herman, A.J. Allen, B. Dowd: Mater. Sci. Eng., A, 2004, vol. 369, pp. 124–3710.1016/j.msea.2003.10.295 ↗
27. A Kulkarni, A. Goland, H. Herman, A.J. Allen, J. Ilavsky, G.G. Long, F. DeCarlo: J. Therm. Spray Technol., 2005, vol. 14, pp. 239–5010.1361/10599630523818 ↗
28. O. Amsellem, K. Madi, F. Borit, V. Guipont, M. Jeandin, D. Jeulin, F. Pauchet, and E. Boller: J. Mater. Sci., 2008, vol. 43, pp. 4091–9810.1007/s10853-007-2239-9 ↗
29. J. Madejski: Int. J. Heat Mass Transfer, 1976, vol. 19, pp. 1009–1310.1016/0017-9310(76)90183-6 ↗
30. M. Bertagnolli, M. Marchese, G. Jacucci, I. StDoltsinis, S. Noelting: J. Comput. Phys., 1997, vol. 133, pp. 205–2110.1006/jcph.1996.5468 ↗
31. J. Mostaghimi, M. Pasandideh-Fard, S. Chandra: Plasma Chem. Plasma Process., 2002, vol. 22, pp. 59–8410.1023/A:1012940515065 ↗
32. M. Pasandideh-Fard, V. Pershin, S. Chandra, J. Mostaghimi, J. Therm. Spray Technol., vol. 11, 2002, pp. 206–1710.1361/105996302770348862 ↗
33. M. Xue, Y. Heichal, S. Chandra, J. Mostaghimi: J. Mater. Sci., 2007, vol. 42, pp. 9–1810.1007/s10853-006-1129-x ↗
34. H.B. Parizi, L. Rosenzweig, J. Mostaghimi, S. Chandra, T. Coyle, H. Salimi, L. Pershin, A. McDonald, C. Moreau: J. Therm. Spray Technol., 2007, vol. 16, pp. 713–2110.1007/s11666-007-9122-8 ↗
35. O. Knotek, R. Elsing: Surf. Coat. Technol., 1987, vol. 32, pp. 261–7110.1016/0257-8972(87)90112-5 ↗
36. S. Cirolini, J.H. Harding, G. Jacucci: Surf. Coat. Technol., 1991, vol. 48, pp. 137–4510.1016/0257-8972(91)90137-L ↗
37. J.H. Harding, P.A. Mulheran, S. Cirolini, M. Marchese, G. Jacucci: J. Therm. Spray Technol., 1995, vol. 4, pp. 34–4010.1007/BF02648526 ↗
38. T. Steinke and M. Baker: Thermal Spray 2006: Building on 100 Years of Success, ASM INTERNATIONAL, Materials Park, OH, 2006, p. 6
39. E. Cochelin, F. Borit, G. Frot, M. Jeandin, L. Decker, D. Jeulin, B. Altaweel, V. Michaud, and P. Noel: J. Therm. Spray Technol., 1999, vol. 8, pp. 117–2410.1361/105996399770350647 ↗
40. R. Ghafouri-Azar, J. Mostaghimi, S. Chandra, M. Charmchi: J. Therm. Spray Technol., 2003, vol. 12, pp. 53–6910.1361/105996303770348500 ↗
41. M. Xue, J. Mostaghimi, S. Chandra: Proc. Thermal 2004: Thermal Spray Solutions—Advances in Technology and Application, ASM INTERNATIONAL, Materials Park, OH, 2004, pp. 776–81
42. H. Wei, H.B. Xiong, L.L. Zheng, H. Zhang: Proc. Thermal 2004: Thermal Spray Solutions—Advances in Technology and Application, ASM INTERNATIONAL, Materials Park, OH, 2004, pp. 707–16
43. O. Zhang, B.Y. Hu, G.X. Wang: Thermal Spray 2007: Global Coating Solutions, ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 254–59
44. L. Pawlowski: Surf. Coat. Technol., 1988, vol. 35, pp. 285–9810.1016/0257-8972(88)90042-4 ↗
45. C. Friedrich, R. Gadow, A. Killinger: Proc. United Thermal Spray Conf. Expos. UTSC ‘’99, DVS Verlag GmbH, Dusseldorf, Germany, 1999, pp. 676–82
46. E. Rajamaki, T. Varis, A. Kulkarni, J. Gutleber, A. Vaidya, M. Karadge, S. Sampath, H. Herman: Proc. Int. Thermal Spray Conf. ITSC2002, DVS-Verlag GmbH, Düsseldorf, Germany, 2002, pp. 622–26
47. S. Beauvais, V. Guipont, M. Jeandin, D. Juve, D. Treheux, A. Robisson, R. Saenger: J. Electroceram., 2005, vol. 15, pp. 65–7410.1007/s10832-005-1101-1 ↗
48. S. Beauvais, V. Guipont, F. Borit, M. Jeandin, M. Español, K.A. Khor, A. Robisson, R. Saenger: Surf. Coat. Technol., 2004, vol. 183, p. 204–1110.1016/j.surfcoat.2003.08.078 ↗
49. K.A. Roberts, T.W. Clyne: Surf. Coat. Technol., 1990, vol. 41, pp. 103–1510.1016/0257-8972(90)90134-X ↗
50. C. Moreau, P. Gougeon, M. Lamontagne: J. Therm. Spray Technol., 1995, vol. 4, pp. 25–3310.1007/BF02648525 ↗
51. Z.G. Feng, M. Domaszewski, G. Montavon, and C. Coddet: J. Therm. Spray Technol., 2002, vol. 11, pp. 62–6810.1361/105996302770348989 ↗
52. T. Kanit, S. Forest, I. Galliet, V. Mounoury, D. Jeulin: Int. J. Solids Struct., 2003, vol. 40, pp. 3647–7910.1016/S0020-7683(03)00143-4 ↗
53. K.F. Young and H.P.R. Frederikse: J. Phys. Chem., 1973, ref. data 2, p. 31310.1063/1.3253121 ↗
54. R.C. Weast: Handbook of Chemistry and Physics, 1st student ed., CRC Press, New York, NY, 1987, p. E-48
55. O. Weiner: Phys. Säch Weiss, 1912, vol. 32, pp. 509–604
56. O. Amsellem, K. Madi, F. Borit, D. Jeulin, V. Guipont, M. Jeandin, E. Boller, and F. Pauchet: Proc. Int. Thermal Spray Conf. and Exhib. (ITSC2008), DVS, Düsseldorf, Germany, 2008, pp. 996–1002
57. A. Ohmori, C.J. Li: Thin Solid Films, 1991, vol. 201, pp. 241–5210.1016/0040-6090(91)90114-D ↗