journal article·2000-11

Microstructural characterization of novel in-situ Al-Be composites

X. D. Zhang, F. C. Grensing, F. Meisenkothen, G. Meyrick, H. L. Fraser, J. M. K. Wiezorek

Publisher page

Abstract

The microstructure of cast and extruded in-situ Al-Be alloys, of compositions of Be-37Al-3Ni (wt pct) and Be-34Al-2Ni-2Ag-2Si (wt pct), was investigated using optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The study indicates that both the Be and Al phases are continuous. The Be phase has a coarse dendritic structure in the as-cast material. Fractographic analysis of failed tensile specimens tested at room temperature revealed basal-plane cleavage failure of the Be phase and ductile failure of the Al phase. A significant number of deformation twins were observed in the Be phase when the tensile loading axis was parallel to the Be dendrite growth axis. An additional fracture mode was observed in the samples tested at elevated temperatures. At elevated temperatures, decohesion of the Al-Be interface was observed on the fracture surface. This phenomena was observed to increase as the test temperature increased from 150 °C to 315 °C. A high density of dislocations with a tangled morphology were observed in the Al phase after the tensile test. These were determined to be associated with easy slip of 1/2〈101〉-type dislocations. The limited ductility of the Be phase was attributed to the predominant basal slip of 〈a〉-type dislocations, b = 1/3〈1120〉, and the lack of dislocations with 〈c〉 components. However, a significant number of dislocations with 〈c〉 components were found in localized areas of the Be phase after extrusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. F. Aldinger: in Beyllium Science and Technology 1, D. Webster and G.J. London, eds., Plenum Press, New York, NY 1979, p. 7.10.1007/978-1-4684-3429-3_2 ↗
2. H.J. Saxton and G.J. London: Beryllium Science and Technology 1, D. Webster and G.J. London, eds., Plenum Press, New York, NY, 1979, p. 115.10.1007/978-1-4684-3429-3_3 ↗
3. I.N. Fridlyander, K.P. Yatsenko, Z.G. Semenova, and G.A. Nekrasova: Met. Sci. Heat Treatment, 1965, vol. 7, p. 143.10.1007/BF00658521 ↗
4. I.N. Fridlyander, K.P. Yatsenko, G.A. Nekrasova, V.A. Sandler, Z.G. Semenova, and A.N. Gulin: Met. Sci. Heat Treatment, 1970, vol. 12, p. 599.10.1007/BF00664957 ↗
5. R.W. Fenn, D.D. Crooks, and R.C. Pasternak: Newer Struct. Mater. Aerospace Appl., 1964, vol. 397, p. 3.
6. R.W. Fenn, R.A. Glass, R.A. Needham, and M.A. Steinberg: J. Spacecraft Rockets, 1965, vol. 2, p. 87.10.2514/3.28126 ↗
7. J.M. Marder: Adv. Mater. Processes, 1997, vol. 152, p. 37.
8. W.T. Nachtrab and N. Levoy: Adv. Mater. Processes, 1997, vol. 151, p. 23.
9. F. Grensing: Proc. 57th Annual Conf. SAWE, La Mesa, CA, 1997, p. 27.
10. G.J. London: in Beryllium Science and Technology 2, D.R. Floyd and J.N. Lowe, eds., Plenum Press, New 1979, p. 297.10.1007/978-1-4757-0668-0_15 ↗
11. D. Hashiguchi and F.C. Grensing: Adv. Powder Metall. Particulate Mater., 1995, vol. 3, pp. 12–13.
12. C. Pokross and A. Carr: Adv. Powder Metall, Particulate Mater., 1995, vol. 3, pp. 12–49.
13. D.C. van Aken and H.L. Fraser: Acta Mater., 1985, vol. 33, p. 963.10.1016/0001-6160(85)90190-7 ↗
14. D.C. van Aken: Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbana, IL, 1986.
15. D.H. Carter, A.C. McGeorge, L.A. Jacobson, and P.W. Stanek: Acta Mater., 1996, vol. 44, p. 4311.10.1016/1359-6454(96)00113-9 ↗
16. N.F. Levoy and B.J. Smith: in Synthesis/Processing of Lightweight Metallic Materials II, C.M. Ward-Close, F.H. Froes, D.J. Chellman, and S.S. Cho, eds., TMS, 1997, p. 363.
17. F.C. Grensing and D. Hashiguchi: Adv. Powder Metall. Particulate Mater., 1995, vol. 3, p. 33.
18. R.P. Elliot and F.A. Shunk: Bull. Alloy Phase Diagrams, 1980, vol. 1, p. 49.10.1007/BF02883286 ↗
19. The Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1985, p. 389.
20. M. Herman and G.E. Spangler: The Metallurgy of Beryllium, Chapman and Hall, London, 1963, pp. 75–83.
21. M. Wilhelm and F. Aldinger: Metall. Trans. A, 1976, vol. 7A, pp. 695–701.10.1007/BF02646478 ↗
22. M. Wilhelm and F. Aldinger: Z. Matallkd., 1975, vol. 66, pp. 323–28.
23. A.J. Martin and C.G. Ellis: The Metallurgy of Beryllium, Chapman and Hall, Institute of Metals, London, 1963, p. 3.
24. C.E.R. Tristem and A. Moore: Beryllium Technology 1, Gordon and Beach, New York, NY, 1966, p. 29.
25. W.W. Beaver: Beryllium Technology 2, Gordon and Beach, New York, NY, 1966, p. 879.
26. D.W. White and J.E. Burke: The Metal Beryllium, ASM, Cleveland, OH, 1954.