journal article·2000-03

Synthesis of MoSi2-TiSi2 pseudobinary alloys by reactive sintering

Kiyotaka Matsuura, Tatsuya Ohmi, Masayuki Kudoh, Tohru Hasegawa

Publisher page

Abstract

MoSi2-TiSi2 pseudobinary alloys are synthesized from mixtures of elemental powders of molybdenum, silicon, and titanium by reactive sintering under a pseudoisostatic pressure of 150 MPa. When the titanium content in the alloy increases from 0 to 33 at. pct, the density of the alloy decreases from approximately 6 to 4 g/cm3, while the relative density is more than 95 pct independent of the titanium content. Vickers hardness of the alloy is approximately 800 when the alloy consists of a monophase structure of α-MoSi2 or β-MoSi2. However, the hardness increases to approximately 950 when the alloy consists of a dual-phase structure of (α-MoSi2+β-MoSi2) or (β-MoSi2+γ-TiSi2). The oxidation resistance of the alloy at 773 K is approximately tripled when the titanium content increases from 0 to 1.7 at. pct, but the effect of the titanium content on the oxidation resistance becomes less remarkable as the titanium content increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R.M. Aikin, Jr.: Scripta Metall. Mater., 1992, vol. 26, pp. 1025–30.10.1016/0956-716X(92)90224-3 ↗
2. R.M. Aikin, Jr.: Mater. Sci. Eng., 1992, vol. A155, pp. 121–33.
3. A.K. Vasudevan and J.J. Petrovic: Mater. Sci. Eng., 1992, vol. A155, pp. 1–17.10.1016/0921-5093(92)90308-N ↗
4. R.M. Aikin, Jr.: Ceram. Eng. Sci. Proc., 1991, vol. 12, pp. 1643–55.10.1002/9780470313848.ch3 ↗
5. D.R. Berztiss, R.R. Cerchiara, E.A. Gulbransen, F.S. Pettit, and G.H. Meier: Mater. Sci. Eng., 1992, vol. A155, pp. 165–81.10.1016/0921-5093(92)90324-T ↗
6. K. Kurokawa: Bull. Jpn. Inst. Met., 1993, vol. 32, pp. 668–75.10.2320/materia1962.32.668 ↗
7. J. Chen, C. Li, Z. Fu, X. Tu, M. Sundberg, and R. Pompe: Mater. Sci. Eng., 1999, vol. A261, pp. 239–44.10.1016/S0921-5093(98)01071-5 ↗
8. K. Kurokawa, H. Houzumi, I. Saeki, and H. Takahashi: Mater. Sci. Eng., 1999, vol. A261, pp. 292–99.10.1016/S0921-5093(98)01078-8 ↗
9. K. Matsuura, T. Ohmi, M. Kudoh, T. Kakuhashi, and T. Hasegawa: J. Jpn. Inst. Light Met., 1997, vol. 47, pp. 446–51.10.2464/jilm.47.446 ↗
10. L.S. Guzei: Ternary Alloys, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschaft, Weinheim, 1993, vol. 7, pp. 225–28.
11. W.J. Boettinger, J.H. Perepezko, and P.S. Frankwicz: Mater. Sci. Eng, 1992, vol. A155, pp. 33–44.10.1016/0921-5093(92)90310-W ↗
12. D.V. Ragone: Thermodynamics of Materials, T. Terao, translator, Maruzen-Wiley, Tokyo, 1996, vol. 1, pp. 152–57.
13. J.B. Holt and Z.A. Munir: J. Mater. Sci., 1986, vol. 21, pp. 251–59.10.1007/BF01144729 ↗
14. S. Adachi, T. Wada, T. Mihara, Y. Miyamoto, M. Koizumi, and O. Yamada: J. Am. Ceram. Soc., 1989, vol. 72, pp. 805–09.10.1111/j.1151-2916.1989.tb06221.x ↗
15. O. Yamada, Y. Miyamoto, and M. Koizumi: J. Mater. Res., 1986, vol. 1, pp. 275–79.10.1557/JMR.1986.0275 ↗
16. D.E. Alman and N.S. Stoloff: Scripta Metall. Mater., 1993, vol. 28, pp. 1525–30.10.1016/0956-716X(93)90586-H ↗
17. B.L. Ferguson: Int. J. Powder Metall. Powder Technol., 1985, vol. 21, pp. 201–07.
18. H. Shingu and K. Ishihara: J. Jpn. Powder Powder Metall., 1990, vol. 37, pp. 670–73.10.2497/jjspm.37.670 ↗
19. K. Matsuura, T. Kitamura, M. Kudoh, Y. Itoh, and T. Ohmi: J. Jpn. Inst. Light Met., 1996, vol. 46, pp. 383–88.10.2464/jilm.46.383 ↗
20. K. Matsuura, T. Kitamura, M. Kudoh, Y. Itoh, and T. Ohmi: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 87–92.10.2355/isijinternational.37.87 ↗
21. K. Matsuura, K. Ohsasa, N. Sueoka, and M. Kudoh: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 310–15.10.2355/isijinternational.38.310 ↗
22. C. Nishimura and C.T. Liu: Acta Metall. Mater., 1993, vol. 41, pp. 113–20.10.1016/0956-7151(93)90343-Q ↗
23. Data Book of Metals, 3rd ed., Japan Institute of Metals, Maruzen, Tokyo, 1993, pp. 10–19.
24. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995, vol. 10, pp. 12628–12631.
25. Data Base MALT, Japanese Institute of Thermal Measurement, Science and Technology Co., Tokyo, 1985.
26. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 261–68.10.1016/0364-5916(85)90021-5 ↗
27. P. Perrot: in Ternary Alloys, G. Petzow and G. Effenberg, eds., VCH, Verlagsgesellschaft, Weinheim, 1993, vol. 7, pp. 283–90.
28. E. Lugscheider, U. Westermann, J. Wonka, H. Meinhardt, H. Neisius, and R. Arnold: Intermetallic Compounds—Structure and Mechanical Properties (JIMIS-6), 1991, pp. 621–29.
29. R. Rosenkranz, G. Frommeyer, and W. Smarsly: Mater. Sci. Eng., 1992, vol. A152, pp. 288–93.10.1016/0921-5093(92)90081-B ↗
30. Y. Umakoshi, T. Nakano, K. Kishimoto, D. Furuta, K. Hagihara, and M. Azuma: Mater. Sci. Eng., 1999, vol. A261, pp. 113–21.10.1016/S0921-5093(98)01056-9 ↗
31. J. Cook, A. Khan, E. Lee, and R. Mahapatra: Mater. Sci. Eng., 1992, vol. A155, pp. 183–98.10.1016/0921-5093(92)90325-U ↗
32. T. Maruyama and K. Yanagihara: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 828–41.10.1016/S0921-5093(97)00673-4 ↗