Role of Plastic Deformation on Elevated Temperature Tribological Behavior of an Al-Mg Alloy (AA5083): A Friction Mapping Approach
Source abstract
Abstract
Friction maps have been developed to explain the behavior of aluminum alloys under dynamic tribological conditions generated by the simultaneous effects of temperature and strain rate. A specially designed tribometer was used to measure the coefficient of friction (COF) of AA5083 strips subjected to sliding with a simultaneous application of tensile strain in the temperature range of 693 K to 818 K (420 °C to 545 °C) and strain rates between 5 × 10−3 s−1 and 4 × 10−2 s−1. The mechanisms of plastic deformation, namely, diffusional flow, grain boundary sliding (GBS), and solute drag (SD), and their operation ranges were identified. Relationships between the bulk deformation mechanism and COF were represented in a unified map by superimposing the regions of dominant deformation mechanisms on the COF map. The change in COF (from 1.0 at 693 K (420 °C) and 1 × 10−2 s−1 to 2.1 at 818 K (545 °C) and 4 × 10−2 s−1) was found to be largest in the temperature–strain rate region, where GBS was the dominant deformation mechanism, as a result of increased surface roughness. The role of bulk deformation mechanisms on the evolution of the surface oxide layer damage was also examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. R. Verma, A.K. Ghosh, S. Kim, and C. Kim: Mater. Sci. Eng., 1995, vol. 191A, pp. 143–50.10.1016/0921-5093(94)09644-9 ↗
2. R. Verma, P.A. Friedman, A.K. Ghosh, S. Kim, and C. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1889–98.10.1007/BF02651938 ↗
3. R.M. Cleveland, A.K. Ghosh, and J.R. Bradley: Mater. Sci. Eng. A, 2003, vol. 351A, pp. 228–36.10.1016/S0921-5093(02)00848-1 ↗
4. O.D. Sherby and J. Wadsworth: Prog. Mater. Sci., 1989, vol. 33, pp. 169–21.10.1016/0079-6425(89)90004-2 ↗
5. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9–20.
6. C. Kim, M.G. Konopnicki, and F.G. Lee: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 77–84.
7. A.T. Morales: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 51–64.
8. M.D. Hanna, P.E. Krajewski, and J.G. Schroth: Proc. STLE/ASME Int. Joint Tribology Conf., San Diego, CA, 2007, IJTC2007-44043, pp. 705–07.10.1115/IJTC2007-44043 ↗
9. P. Krajewski: U.S. Patent 5,819,572, Oct. 13, 1998.
10. B. Navinsek and P. Panjan: Surf. Coat. Technol., 1995, vols. 74–75, pp. 919–26.10.1016/0257-8972(95)08287-5 ↗
11. B. Navinsek, P. Panjan, and I. Milosev: Surf. Coat. Technol., 1997, vol. 97, pp. 182–91.10.1016/S0257-8972(97)00393-9 ↗
12. J. Edwards: Coating and Surface Treatment Systems for Metals, ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 72–183.
13. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
14. J. Harper and J.E. Dorn: Acta Metall., 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
15. T.G. Langdon and P. Yavari: Acta Metall., 1982, vol. 30, pp. 881–87.10.1016/0001-6160(82)90086-4 ↗
16. J.N. Wang and T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2487–92.10.1016/0956-7151(94)90328-X ↗
17. P. Yavari, D.A. Miller, and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 871–79.10.1016/0001-6160(82)90085-2 ↗
18. F.A. Mohamed: Mater. Sci. Eng., 1978, vol. 32A, pp. 37–40.10.1016/0025-5416(78)90209-4 ↗
19. J. Weertman: J. Appl. Phys., 1957, vol. 28, pp. 362–64.10.1063/1.1722747 ↗
20. R.Z. Valiev and O.A. Kaibyshev: Acta Metall., 1983, vol. 31, pp. 2121–28.10.1016/0001-6160(83)90031-7 ↗
21. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
22. T.G. Langdon: Mater. Sci. Eng., 1991, vol. 137A, pp. 1–11.10.1016/0921-5093(91)90312-B ↗
23. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
24. R.C. Gifkins: Metall. Trans. A, 1976, vol. 7A, pp. 1225–32.10.1007/BF02656607 ↗
25. E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081–91.
26. M.A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1249–61.10.1007/s11661-005-0217-x ↗
27. W.P. Green, M.A. Kulas, A. Niazi, K. Oishi, E.M. Taleff, P.A. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2727–38.10.1007/BF02586106 ↗
28. T.R. McNelley, K. Oh-Ishi, A.P. Zhilyaev, S. Swaminathan, P.E. Krajewski, and E.M. Taleff: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 50–64.10.1007/s11661-007-9401-5 ↗
29. D.E. Cipoletti, A.F. Bower, Y. Qi, and P.E. Krajewski: Mater. Sci. Eng., 2009, vol. 504A, pp. 175–82.10.1016/j.msea.2008.10.037 ↗
30. M. Fishkis and J.C. Lin: Wear, 1997, vol. 206, pp. 156–70.10.1016/S0043-1648(96)07480-7 ↗
31. G. Buytaert, H. Terryn, S. Van Gils, B. Kernig, B. Grzemba, and M. Mertens: Surf. Interface Anal., 2005, vol. 37, pp. 534–43.10.1002/sia.2046 ↗
32. D.J. Field, G.M. Scamans, and E.P. Butler: Metall. Trans. A, 1987, vol. 18A, pp. 463–72.10.1007/BF02648807 ↗
33. C. Lea and J. Ball: Appl. Surf. Sci., 1984, vol. 17, pp. 344–62.10.1016/0378-5963(84)90023-0 ↗
34. M.H. Zayan, O.M. Jamjoom, and N.A. Razik: Oxid. Met., 1990, vol. 34, pp. 323–33.10.1007/BF00665021 ↗
35. M.F. Frolish, J.C. Walker, C. Jiao, W.M. Rainforth, and J.H. Beynon: Tribol. Int., 2005, vol. 38, pp. 1050–58.10.1016/j.triboint.2005.07.021 ↗
36. P. Hancock and J.R. Nicholls: Mater. Sci. Technol., 1988, vol. 4, pp. 398–06.10.1179/mst.1988.4.5.398 ↗
37. M. Schutze: Protective Oxide Scales and Their Breakdown, 1st ed., John Wiley & Sons Ltd., Chichester, 1997, pp. 67–114.
38. H.E. Evans: Mater. Sci. Technol., 1988, vol. 4, pp. 415–20.
39. H.R. Le, M.P.F. Sutcliffe, P.Z. Wang, and G.T. Burstein: Acta Mater., 2004, vol. 52, pp. 911–20.10.1016/j.actamat.2003.10.027 ↗
40. M.G. Zelin: Acta Mater., 1997, vol. 45, pp. 3533–42.10.1016/S1359-6454(97)00065-7 ↗
41. V.P. Pojda, V.V. Bryukhovets’ky, A.V. Pojda, R.I. Kuznetsova, V.F. Klepikov, and D.L. Voronov: Phys. Met. Metall., 2007, vol. 103, pp. 414–23.10.1134/S0031918X07040151 ↗
42. Y. Takayama, T. Tozawa, and H. Kato: Acta Mater., 1999, vol. 47, pp. 1263–70.10.1016/S1359-6454(98)00416-9 ↗
43. W.D. Cao, X.P. Lu, and H. Conrad: Acta Mater., 1996, vol. 44, pp. 697–706.10.1016/1359-6454(95)00176-X ↗
44. J.K. Chang, E.M. Taleff, P.E. Krajewski, and J.R. Ciulik: Scripta Mater., 2009, vol. 60, pp. 459–62.10.1016/j.scriptamat.2008.11.031 ↗
45. J. Koike, M. Mabuchi, and K. Higashi: Acta Metall. Mater., 1995, vol. 43, pp. 199–206.10.1016/0956-7151(95)90275-9 ↗
46. W.J.D. Shaw: J. Mater. Sci., 1989, vol. 24, pp. 4114–19.10.1007/BF01168983 ↗
47. S.F. Claeys, J.W. Jones, and J.E. Allison: in Dispersion Strengthened Aluminum Alloys, Y.W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1988, pp. 323–36.
48. R. Benzing, I. Goldblatt, V. Hopkins, W. Jamison, K. Mecklenburg, and M. Peterson: Friction and Wear Devices Catalog, 2nd ed., American Society of Lubrication Engineers, Park Ridge, Ill, 1976, pp. 1–458.
49. J.A. Schey: Tribology in Metalworking: Friction, Fabrication and Wear, ASM, Metals Park, OH, 1983.
50. S. Kalpakjian: Annals CIRP, 1985, vol. 34 (2), pp. 585–92.10.1016/S0007-8506(07)60191-7 ↗
51. J.A. Schey and M.K. Smith: Proc. Sheet Metal and Stamping Symp., Society of Automotive Engineers, Detroit, MI, 1993, SP-944, pp. 261–67.
52. P.E. Krajewski and A.T. Morales: J. Mater. Eng. Perform., 2004, vol. 13, pp. 700–09.10.1361/10599490421330 ↗
53. X. Meng-Burany, T.A. Perry, A.K. Sachdev, and A.T. Alpas: Wear, 2011, vol. 270, pp. 152–62.10.1016/j.wear.2010.09.007 ↗
54. A.R. Riahi, A. Edrisy, and A.T. Alpas: Surf. Coat. Technol., 2009, vol. 203, pp. 2030–35.10.1016/j.surfcoat.2009.01.041 ↗