Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy
Source abstract
Abstract
Multipass friction stir processing (FSP) of AA5086 Al-Mg alloy was carried out to obtain bulk fine grain material for superplastic forming. FSP produced inhomogeneous microstructure in the thickness direction. The aim of the present work was to understand superplastic forming behavior of distinct microstructural layers, i.e., nugget layer (NL) containing microstructure from nugget zone, thermo-mechanically affected/heat-affected layer (TL) containing microstructure from thermo-mechanically affected/heat-affected (TMAZ/HAZ) zone, and composite layer (CL) containing microstructure from both the above zones (nugget and TMAZ/HAZ). Superplastic forming of NL, TL, and CL blanks was carried out at constant gas pressure. Three different forming gas pressures of 0.75, 1.15, and 1.5 MPa corresponding to strain rates of 5 × 10−4 s−1, 1 × 10−3 s−1 , and 5 × 10−3 s−1, respectively, were used. Forming characteristics of CL were found to be comparable to that of NL and even better at higher forming pressures. Concomitant microstructural evolution during bulging of CL and NL plays an important role here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 2000, vol. 42, pp. 163–68.10.1016/S1359-6462(99)00329-2 ↗
2. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 139A, pp. 642–58.10.1007/s11661-007-9459-0 ↗
3. R.S. Mishra and M.W. Mahoney: Mater. Sci. Forum, 2001, vol. 507, pp. 357–59.
4. Z.Y. Ma, R.S. Mishra, and M.W. Mahoney: Acta Mater., 2002, vol. 50, pp. 4419–30.10.1016/S1359-6454(02)00278-1 ↗
5. I. Charit and R.S. Mishra: J. Mater. Res., 2004, vol. 19, pp. 3329–42.10.1557/JMR.2004.0429 ↗
6. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
7. J. Gandra, R.M. Miranda, and P. Vilaca: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5592–99.10.1016/j.msea.2011.03.105 ↗
8. I. Charit and R.S. Mishra: Mater. Sci. Eng. A, 2003, vol. 359, pp. 290–96.10.1016/S0921-5093(03)00367-8 ↗
9. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Scripta Mater., 2006, vol. 54, pp. 1623–26.10.1016/j.scriptamat.2006.01.010 ↗
10. K.N. Ramesh, S. Pradeep, and V. Pancholi: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4311–19.10.1007/s11661-012-1232-3 ↗
11. Z.Y. Ma, R.S. Mishra, and F.C. Liu: Mater. Sci. Eng. A, 2009, vol. 505, pp. 70–78.10.1016/j.msea.2008.11.016 ↗
12. L.B. Johannes and R.S. Mishra: Mater. Sci. Eng. A, 2007, vol. 464, pp. 255–60.10.1016/j.msea.2007.01.141 ↗
13. S. Pradeep and V. Pancholi: Mater. Sci. Eng. A, 2013, vol. 561, pp. 78–87.10.1016/j.msea.2012.10.050 ↗
14. J.Q. Su, T.W. Nelson, and C.J. Sterling: Scripta Mater., 2005, vol. 52, pp. 135–40.10.1016/j.scriptamat.2004.09.014 ↗
15. A. Dutta, I. Charit, L.B. Johannes, and R.S. Mishra: Mater. Sci. Eng. A, 2005, vol. 395, pp. 173–79.10.1016/j.msea.2004.12.016 ↗
16. M. Mahoney, A.J. Barnes, W.H. Bingel, and C. Fuller: Mater. Sci. Forum, 2004, vol. 447–448, pp. 505–12.10.4028/www.scientific.net/MSF.447-448.505 ↗
17. F. Jovane: Int. J. Mech. Sci., 1968, vol. 10, pp. 403–27.10.1016/0020-7403(68)90005-2 ↗
18. G.C. Cornfield and R.H. Johnson: Int. J. Mech. Sci., 1970, vol. 12, pp. 479–90.10.1016/0020-7403(70)90075-5 ↗
19. A.K. Ghosh and C.H. Hamilton: Metall. Trans. A., 1982, vol. 13A, pp. 732–43.
20. V. Pancholi and B.P. Kashyap: J. Mater. Process. Technol., 2007, vol. 186, pp. 214–20.10.1016/j.jmatprotec.2006.12.036 ↗
21. W. Fan, B.P. Kashyap, and M.C. Chaturvedi: Mater. Sci. Technol., 2001, vol. 17, pp. 439–45.10.1179/026708301101510014 ↗
22. H.S. Yang and A.K. Mukherjee: Int. J. Mech. Sci., 1992, vol. 34, pp. 283–97.10.1016/0020-7403(92)90036-G ↗
23. F.U. Enikeev and A.A. Kruglov: Int. J. Mech. Sci., 1995, vol. 37, pp. 473–83.10.1016/0020-7403(94)00081-T ↗
24. W. Xu, J. Liu, G. Luan, and C. Dong: Mater. Des., 2009, vol. 30, pp. 1886–93.10.1016/j.matdes.2008.09.021 ↗
25. Y.H. Hwang, Z.W. Kang, Y.C. Chiou, and H.H. Hsu: Int. J. Mach. Tool Manuf., 2008, vol. 48, pp. 778–87.10.1016/j.ijmachtools.2007.12.003 ↗
26. M.H. Alvi, S. Cheong, H. Weiland, and A.D. Rollett: Mater. Sci. Forum, 2004, vol. 467–470, pp. 357–62.10.4028/www.scientific.net/MSF.467-470.357 ↗
27. K.V. Jata and K.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
28. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Press, Oxford, 1995.
29. C.I. Chang, C.J. Lee, and J.C. Huang: Scripta Mater., 2004, vol. 51, pp. 509–14.10.1016/j.scriptamat.2004.05.043 ↗
30. M.W. Mahoney, C.G. Rhodes, J.C. Flintoff, R.A. Spurling, and W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–64.10.1007/s11661-998-0021-5 ↗
31. F.J. Humpherys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
32. Z.X. Guo and N. Ridley: Mater. Sci. Technol., 1990, vol. 6, pp. 510–15.10.1179/mst.1990.6.6.510 ↗
33. T.G. Langdon: J. Mater. Sci., 2009, vol. 44, pp. 5598–5610.10.1007/s10853-009-3780-5 ↗
34. V. Pancholi and B.P. Kashyap: Mater. Sci. Eng. A, 2003, vol. 351, pp. 174–82.10.1016/S0921-5093(02)00849-3 ↗