journal article·2011-02

Stress-Corrosion Cracking of AISI 4340 Steel in Aqueous Environments

Sergiy Kalnaus, Jixi Zhang, Yanyao Jiang

Publisher page

Abstract

Stress corrosion cracking of the high-strength martensitic steel AISI 4340 (yield stress = 1503 MPa) in NaCl aqueous solutions of different concentrations was studied experimentally using compact tension specimens in free corroding conditions. The experiments were conducted under the controls of constant load, constant crack opening displacement (COD), constant loading rate, and constant COD rate. Despite the differences in controlling conditions, the experiments yielded similar results for the threshold stress intensity factor and the plateau velocity in the 3.5 wt pct NaCl solution. Dependence of the plateau velocity on the NaCl concentration was observed, whereas the values of the threshold stress intensity factors seem to be independent of the NaCl concentration in distilled water.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19, no. 2, pp. 317–29.10.1016/0013-7944(84)90026-2 ↗
2. S. Ramamurthy and A. Atrens: Corr. Sci., 1993, vol. 34, no. 9, pp. 1385–402.10.1016/0010-938X(93)90235-9 ↗
3. R.H. Jones, M.J. Danielson, and D.R. Baer: Fracture Mechanics: Perspectives and Directions (Twentieth Symp.), Eds. R.P. Wei and R.P. Gangloff, ASTM, Philadelphia, PA, 1989, pp. 209–32.10.1520/STP18826S ↗
4. R.P. Wei and R.P. Gangloff: In Fracture Mechanics: Perspectives and Directions (Twentieth Symp.), Eds. R.P. Wei and R.P. Gangloff, ASTM, Philadelphia, PA, 1989, pp. 233–64.10.1520/STP18827S ↗
5. W.Y. Chu, C.M. Hsiao, and J.W. Wang: Metall. Trans. A, 1985, vol. 16A, pp. 1663–70.10.1007/BF02663022 ↗
6. N. Taniguchi and A.R. Troiano: Trans. ISIJ, 1969, vol. 9, no. 4, pp. 306–12.10.2355/isijinternational1966.9.306 ↗
7. Y. Lee and R.P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2174–90.10.1007/s11661-006-9051-z ↗
8. S. Serebrinsky, E.A. Carter, and M. Ortiz: J. Mech. Phys. Solids, 2004, vol. 52, pp. 2403–30.10.1016/j.jmps.2004.02.010 ↗
9. I. Scheider, M. Pluff, and W. Dietzel: Eng. Fract. Mech., 2008, vol. 75, pp. 4283–91.10.1016/j.engfracmech.2007.10.002 ↗
10. T. Boellinghaus and H. Hoffmeister: Corrosion, 2000, vol. 56, pp. 611–22.10.5006/1.3280564 ↗
11. V.K. Tewari: Tool Alloy Steels, 1981, vol. 16, no. 3–4 pp. 89–93.
12. U. Gramberg: Corrosion Cracking, Ed. V.S. Goel, Salt Lake City, UT, 1985, pp. 147–50.
13. D.A. Berman and V.S. Agarwala: Hydrogen Embrittlement: Prevention and Control, Ed. L. Raymond, ASTM, Philadelphia, PA, 1988, pp. 98–104.10.1520/STP45292S ↗
14. W.G. Clark, Jr.: J. Mater. Energy Syst., 1979, vol. 1, no. 1, pp. 33–40.10.1007/BF02833988 ↗
15. Y. Takeda and C.J. McMahon, Jr.: Metall. Trans. A, 1981, vol. 12A, pp. 1255–66.10.1007/BF02642339 ↗
16. W. Dietzel: Mater. Sci. (Russia), 2004, vol. 40, no. 6, pp. 749–55.10.1007/s11003-005-0111-0 ↗
17. N. Eliaz, A. Shachar, B. Tal, and D. Eliezer: Eng. Failure Anal., 2002, vol. 9, pp. 167–84.10.1016/S1350-6307(01)00009-7 ↗
18. J.B. Leblond, D. Nejem, D. Dubois, and S. Talbot-Besnard: Acta Metall., 1987, vol. 35, no. 7, pp. 1703–14.10.1016/0001-6160(87)90116-7 ↗
19. S.I. Pyun and H.K. Lee: Metall. Trans. A., 1990, vol. 21A, pp. 2577–83.10.1007/BF02647003 ↗
20. R.P. Wei and S.R. Novak: JTEVA, 1987, vol. 15, no. 1, pp. 38–75.10.1520/JTE11550J ↗
21. A.J. McEvily, Jr., Ed.: Atlas of Stress-Corrosion and Corrosion Fatigue Curves, ASM INTERNATIONAL, Materials Park, OH, 1990, p. 541.
22. H.C. Chu and R.P. Wei: Corrosion, 1990, vol. 46, no. 6, pp. 468–76.10.5006/1.3585134 ↗
23. R.O. Ritchie, M.H. Castro Cedeno, V.F. Zackay, and E.R. Parker: Metall. Trans. A, 1978, vol. 9A, pp. 35–40.10.1007/BF02647168 ↗
24. G.F. Li, R.G. Wu, and T.C. Lei: Metall. Trans. A, 1990, vol. 21A, pp. 503–05.
25. R.M. Rieck, A. Atrens, and I.O. Smith: Mater. Forum, 1989, vol. 13, pp. 48–53.
26. R.H. Jones: Stress-Corrosion Cracking: Materials Performance and Evaluation, ASM INTERNATIONAL, Materials Park OH, 1992.
27. W. Dietzel and K. Ghosal: Fatigue Fract. Engng. Mater. Struct., 1998, vol. 21, no. 10, pp. 1279–86.10.1046/j.1460-2695.1998.00100.x ↗
28. A. Oehlert and A. Atrens: Corr. Sci., 1996, vol. 38, pp. 1159–69.10.1016/0010-938X(96)00010-8 ↗
29. S. Liu and D.D. Macdonald: Corrosion, 2002, vol. 58, no. 10, pp. 835–45.10.5006/1.3287665 ↗
30. Y. Hirose and T. Mura: Eng. Fract. Mech., 1989, vol. 34, no. 3, pp. 729–42.10.1016/0013-7944(89)90134-3 ↗
31. I.W. Kang, J.K. Choi, and S.I. Pyun: Steel Res. Int., 1987, vol. 58, no. 12, pp. 565–69.10.1002/srin.198700071 ↗
32. D.D. Macdonald: 2001 TMS Annual Meeting, New Orleans, LA, 2001, pp. 193–210.
33. J.A. Hauser II, R.W. Judy, and T.W. Crooker: Corrosion Cracking, ASM INTERNATIONAL, Materials Park, OH, 1985, pp. 215–20.
34. B.F. Brown and C.D. Beachem: Corr. Sci., 1965, vol. 5, no. 11, pp. 745–50.10.1016/S0010-938X(65)80002-6 ↗
35. C.S. Carter: Corrosion, 1971, vol. 27, pp. 471–77.10.5006/0010-9312-27.11.471 ↗
36. A.A. Sheinker and J.D. Wood: Stress Corrosion Cracking of Metals— A State of the Art, ASTM, Philadelphia, PA, 1972, pp. 16–38.10.1520/STP34693S ↗
37. P. Shahinian and R.W. Judy, Jr.: Stress Corrosion—New Approaches, ASTM, Philadelphia, PA, 1976, pp. 128–42.10.1520/STP28675S ↗
38. Y.A. Krupin and I.K. Kiselev: Mater. Sci. Eng. A., 1990, vol. A130, no. 1, pp. 29–35.10.1016/0921-5093(90)90078-H ↗
39. S. Yuyama, T. Kishi, and Y. Hisamatsu: J. Acoust. Emiss., 1983, vol. 2, no. 1–2, pp. 71–93.
40. W.B. Lisagor: Environment-Sensitive Fracture: Evaluation and Comparison of Test Methods, ASTM, Philadelphia, PA, 1984, pp. 80–97.10.1520/STP34428S ↗
41. Y. Hirose and K. Tanaka: J. Soc. Mater. Sci. Jpn., 1980, vol. 29, no. 323, pp. 822–28.10.2472/jsms.29.822 ↗
42. M. Tsuda, Y. Hirose, Z. Yajima, and K. Tanaka: Proc. Second Int. Conf. on Residual Stresses, Nancy, France, 1988, pp. 997–1002.10.1007/978-94-009-1143-7_167 ↗
43. H.W. Chung: Diss. Abstr. Int., 1983, vol. 44, no. 4, p. 204.
44. R.M. Rieck, A. Atrens, and I.O. Smith: Metall. Trans. A., 1989, vol. 20A, pp. 889–95.10.1007/BF02651655 ↗
45. E.M. Hackett, P.J. Moran, and J.P. Gudas: Fracture Mechanics: Seventeenth Volume, ASTM, Philadelphia, PA, 1986, pp. 512–41.10.1520/STP17415S ↗
46. Y. Hirose, Z. Yajima, and K. Tanaka: Adv. X Ray Anal., 1984, vol. 27, pp. 213–20.10.1154/S0376030800017109 ↗
47. M. Tsuda, Y. Hirose, Z. Yajima, and K. Tanaka: J. Soc. Mater. Sci. Jpn., 1988, vol. 37, no. 417, pp. 599–605.10.2472/jsms.37.599 ↗
48. Y. Hirose and K. Tanaka: Metallic Corrosion. 8th Int. Congress on Metallic Corrosion, vol. 1, Mainz, Germany, 1981. pp. 553–58.
49. G. Sandoz: Metall. Trans., 1972, vol. 3, pp. 1169–76.10.1007/BF02642449 ↗
50. V.K. Tewari, R. Winand, J. Charlier, J.P. Elinck, and J. Van Muylder: Steel Res. Int., 1982, vol. 53, no. 8, pp. 329–32.10.1002/srin.198205178 ↗
51. F.P. Ford: Embrittlement by the Localized Crack Environment, Philadelphia, PA, 1983, pp. 117–47.
52. W.G. Clark and J.D. Landes, Jr.: Stress Corrosion—New Approaches, ASTM, Philadelphia, PA, 1976, pp. 108–27.10.1520/STP28674S ↗
53. K. Hirano, S. Ishizaki, H. Kobayashi, and H. Nakazawa: JTEVA, 1985, vol. 13, no. 2, pp. 162–68.10.1520/JTE10775J ↗
54. R.A. Mayville, T.J. Warren, and P.D. Hilton: J. Eng. Mater. Technol., 1987, vol. 109, no. 3, pp. 188–93.10.1115/1.3225962 ↗
55. R.A. Mayville, T.J. Warren, and P.D. Hilton: JTEVA, 1989, vol. 17, no. 4, pp. 203–11.10.1520/JTE11115J ↗
56. W. Dietzel, K.H. Schwalbe, and D. Wu: Fatigue Fract. Eng. Mater. Struct., 1989, vol. 12, no. 6, pp. 495–510.10.1111/j.1460-2695.1989.tb00559.x ↗
57. N. Winzer, A. Atrens, W. Dietzel, G. Song, and K.U. Kainer: Mater. Sci. Eng. A, 2008, vol. 472, pp. 97–106.10.1016/j.msea.2007.03.021 ↗
58. W. Dietzel and J. Mueller-Roos: Mater. Sci., 2001, vol. 37, no. 2,pp. 264–71.10.1023/A:1013214910345 ↗
59. ISO 7539-9:2003, Corrosion of Metals and Alloys—Stress Corrosion Testing, Part 9, 2003.
60. R.P.M. Proctor and H.W. Paxton: Trans. ASM, 1969, vol. 62, pp. 989–99.
61. E.A. Steigerwald and W.D. Benjamin: Metall. Trans., 1971, vol. 2, pp. 606–08.10.1007/BF02663357 ↗
62. V.A. Marichev: Zashchita Metallov, 1975, vol. 11, no. 3, pp. 296–99.
63. A. Nadai: Theory of Flow and Fracture of Solids, 2nd ed., vol. 1, McGraw-Hill, New York, NY, 1950, pp. 347–52.
64. J.C. Newman, Jr.: Int. J. Fracture, 1981, vol. 17, pp. 567–78.10.1007/BF00681557 ↗
65. A. Atrens and Z.F. Wang: J. Mater. Sci., 1998, vol. 33, pp. 405–15.10.1023/A:1004328031430 ↗
66. D.L. Dull and L. Raymond: Metall. Trans., 1972, vol. 3, pp. 2943–47.10.1007/BF02652865 ↗
67. I.M. Austen: Int. J. Fracture, 1976, vol. 12, pp. 253–63.10.1007/BF00036983 ↗
68. K. Nakasa and H. Takei: Eng. Fract. Mech., 1983, vol. 18, pp. 879–85.10.1016/0013-7944(83)90132-7 ↗
69. Y.A. Krupin and I.K. Kiselev: Scripta Metall. Mater., 1990, vol. 24, pp. 2113–18.10.1016/0956-716X(90)90495-3 ↗
70. C. Berger: Corrosion Cracking, Salt Lake City, UT, 1985, pp. 235–40.
71. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19, no. 6, pp. 1057–67.10.1016/0013-7944(84)90151-6 ↗
72. R.P. Wei and S.R. Novak: Environment-Sensitive Fracture: Evaluation and Comparison of Test Methods, ASTM, Philadelphia, PA, 1984, pp. 75–79.10.1520/STP34427S ↗
73. A.K. Wong, L. Milton, and W.F. Czyrklis: Report AMMRC-MS-79-1, Army Materials and Mechanics Research Center, Watertown, MS, 1979.
74. W.G. Clark, Jr.: Flaw Growth and Fracture, ASTM, Philadephia, PA, 1977, pp. 331–44.10.1520/STP35548S ↗
75. R.K. Singh Raman, R. Rihan, and R.N. Ibrahim: Mater. Sci. Eng. A, 2007, vols. 452–453, pp. 652–56.10.1016/j.msea.2006.11.067 ↗
76. R.N. Ibrahim, R. Rihan, and R.K. Singh Raman: Eng. Fract. Mech., 2008, vol. 75, no. 6, pp. 1623–34.10.1016/j.engfracmech.2007.06.007 ↗
77. B.P. Somerday and R.P. Gangloff: Mater. Sci. Eng., 1998, vol. 254A, pp. 166–78.10.1016/S0921-5093(98)00695-9 ↗
78. B.P. Somerday and R.P. Gangloff: Mater. Sci. Eng., 1998, vol. 254A, pp. 179–88.10.1016/S0921-5093(98)00696-0 ↗
79. S. Yamamoto and T. Fujita: Proc. Fracture 1969, Chapman & Hall, London, UK, 1969, pp. 425–38.
80. W.W. Gerberich, P.G. Marsh, and J.W. Hoehn: Proc. Hydrogen Effects in Materials, Moran, WY, 1994, pp. 539–51.10.1002/9781118803363.ch47 ↗
81. W.W. Gerberich, R.A. Oriani, M.J. Lii, X. Chen, and T. Foecke: Philos. Mag., 1991, vol. A63, no. 2, pp. 363–76.10.1080/01418619108204854 ↗
82. J.A. Wert: Corrosion, 1983, vol. 39, no. 2, pp. 71–73.10.5006/1.3580818 ↗
83. A. Oehlert and A. Atrens: J. Mater. Sci., 1998, vol. 33, no. 3, pp. 775–81.10.1023/A:1004362400904 ↗
84. J.H. Underwood, J.C. Newman, Jr., and R.R. Seeley: JTEVA, 1980, vol. 8, no. 6, pp. 308–13.10.1520/JTE10630J ↗