Influence of the second phase on the room-temperature tensile and creep deformation mechanisms of α-β titanium alloys, part II: Creep deformation
Source abstract
Abstract
This work focuses on the effect of the second phase on the ambient temperature creep deformation mechanisms of titanium alloys, using Ti-6.0 wt pct Mn and Ti-8.1 wt pct V with Widmanstätten microstructures as the model systems. In Part I it was observed that the presence of a second phase can affect the tensile deformation behavior. Likewise, the creep deformation mechanisms of the two-phase alloys differ from the mechanisms of single-phase alloys. These α-β deformation mechanisms include twinning in fine grains of the α phase and stress-induced hexagonal martensite in the β phase of Ti-8.1 V. This is the first time that twinning in the α phase and stress-induced martensite in the β phase are reported as creep deformation mechanisms in an α-β titanium alloy. Several factors, including elastic interaction effects, shear stress due to deformation products in adjacent phases, and the stability of the β phase, affect the creep deformation mechanisms in these alloys. Models for the time-dependent growth of martensite are suggested. In addition, the difference between tensile and creep deformation in regard to accumulation of stresses to reach the critical stresses is described.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. B.W. Neuberger, C.A. Greene, and G.D. Gute:Scientific Basis for Nuclear Waste Management XXV Symposium (Materials Research Society Symposium Proceedings), Materials Research Soc, Warrendale, PA, 2002, vol. 716, pp. JJ11.7.1-JJ11.7.8.
2. A.W. Thompson and B. Odegaard:Metall. Trans. A, 1973, vol. 4, pp. 899–908.10.1007/BF02645587 ↗
3. W.H. Miller, Jr., R.T. Chen, and E.A. Starke, Jr.:Metall. Trans. A, 1987, vol. 18A, pp. 1451–68.10.1007/BF02646658 ↗
4. M.A. Imam and C.M. Gilmore:Metall. Trans. A, 1979, vol. 10A, pp. 419–25.10.1007/BF02697068 ↗
5. H. Adenstedt:Met. Progr., 1949, vol. 56, pp. 658–79.
6. W.J. Evans: inThird International Conference on Creep and Fracture of Engineering Materials, Swansea, U.K., 1987, pp. 603–13.
7. W.H. Reimann: J.Mater., 1971, vol. 6, pp. 926–40.
8. B.C. Odegard and A.W. Thompson:Metall. Trans., 1974, vol. 5, pp. 1207–13.10.1007/BF02644335 ↗
9. G.Y. Gao and S.C. Dexter:Metall. Trans. A, 1987, vol. 18A, pp. 1125–30.10.1007/BF02668562 ↗
10. B.C. Odegard and R.E. Maringer:The Room Temperature Creep Behavior of Wrought and As-Welded Ti-6Al-4V, Technical Report, Sandia National Laboratory, 1971.
11. M.F. Savage, T. Neeraj, and M.J. Mills:Metall. Trans. A, 2002, vol. 33A, p. 81.
12. D.R. Luster, W.W. Wentz, and D.W. Kaufman:Materials and Methods, 1953, vol. 37, pp. 100–10.
13. A.J. Hatch, J.M. Partridge, and R.G. Broadwell: J.Mater., 1967, vol. 2, pp. 111–23.
14. T. Neeraj, D.H. Hou, G.S. Daehn, and M.J. Mills:Acta Mater., 2000, vol. 48, pp. 1225–35.10.1016/S1359-6454(99)00426-7 ↗
15. A. Ramesh and S. Ankem:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1137–44.10.1007/s11661-002-0215-1 ↗
16. K.L. Murty: inProceedings of the Tenth World Conference on Titanium, G. Lutjering and J. Albrecht, eds., Hamburg, Germany, 2003, vol. III, pp. 2033–40.
17. T. Neeraj and M.J. Mills:Philos. Mag. A, 2002, vol. 82, pp. 779–802.10.1080/01418610110086733 ↗
18. A.K. Aiyangar, B.W. Neuberger, P.G. Oberson, and S. Ankem:Metall. Mater. Trans. A, 2005, vol. 36A, pp. 637–44.10.1007/s11661-005-0179-z ↗
19. S. Ankem, C.A. Greene, and S. Singh:Scripta Metall. Mater., 1994, vol. 30, pp. 803–08.10.1016/0956-716X(94)90203-8 ↗
20. C.A. Hultgren, C.A. Greene, and S. Ankem:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1675–79.10.1007/s11661-999-0106-9 ↗
21. H.P. Chu: J.Mater., 1970, vol. 5, pp. 633–42.
22. B.C. Odegard and A.W. Thompson:Metall. Trans. A, 1974, vol. 5, pp. 1207–13.10.1007/BF02644335 ↗
23. S. Suri, T. Neeraj, G.S. Daehn, D.H. Hou, J.M. Scott, R.W. Hayes, and M.J. Mills:Mater. Sci. Eng. A, 1997, vol. 234–6, pp. 996–99.10.1016/S0921-5093(97)00322-5 ↗
24. S. Suri, G.B. Viswanathan, T. Neeraj, D.H. Hou, and M.J. Mills:Acta Mater., 1999, vol. 47, pp. 1019–64.10.1016/S1359-6454(98)00364-4 ↗
25. S. Ankem and H. Margolin:Metall. Trans. A, 1983, vol. 14A, pp. 500–03.10.1007/BF02644228 ↗
26. A.K. Chakrabarti and E.S. Nichols: in:Titanium ’80 Science and Technology, H. Kimura and O. Izumi, eds., AIME, Warrendale, PA, 1981, pp. 1081–90.
27. C.A. Greene: Ph.D. Dissertation, University of Maryland, College Park, 1994.
28. G. Grewal and S. Ankem:Metall. Trans. A, 1989, vol. 20A, pp. 39–54.10.1007/BF02647492 ↗
29. S. Ankem, J.G. Shyue, M.N. Vijayshankar, and R.J. Arsenault:Mater. Sci. Eng., A, 1989, vol. A111, pp. 51–60.10.1016/0921-5093(89)90197-4 ↗
30. D.G. Attwood and P.M. Hazzledine:Metallography, 1976, vol. 9, pp. 483–501.10.1016/0026-0800(76)90016-1 ↗
31. A. Jaworski, Jr. and S. Ankem: Unpublished research, 2005.
32. D. Doraiswamy and S. Ankem:Acta Mater., 2003, vol. 51, pp. 1607–19.10.1016/S1359-6454(02)00561-X ↗
33. C.A. Greene and S. Ankem: inBeta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 309–16.
34. A. Ramesh: Master’s Thesis, University of Maryland, College Park, 1998.
35. H. Li and L. Salamanca-Riba:Ultramicroscopy, 2001, vol. 88, pp. 171–78.10.1016/S0304-3991(01)00079-1 ↗
36. M.A. Meyers, O. Vöhringer, and V.A. Lubarda:Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
37. T. Grosdidier, Y. Combres, E. Gautier, and M.J. Philippe:Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1095–106.10.1007/s11661-000-0105-3 ↗
38. T.S. Kuan, R.R. Ahrens, and S.L. Sass:Metall. Trans. A, 1975, vol. 6A, pp. 1767–74.10.1007/BF02642306 ↗
39. P.G. Oberson and S. Ankem:Phys. Rev. Lett., 2005, vol. 95, art. no. 165501.10.1103/PhysRevLett.95.165501 ↗
40. S. Mahajan and D.F. Williams:Int. Metall. Rev., 1973, vol. 18, pp. 43–60.10.1179/imr.1973.18.2.43 ↗
41. J.W. Christian and S. Mahajan:Prog. Mater. Sci., 1995, vol. 39, pp. 1–151.10.1016/0079-6425(94)00007-7 ↗