In Situ Observation and Phase-Field Modeling of Peritectic Solidification of Low-Carbon Steel
Source abstract
Abstract
In the present study, both in situ experiment and multiphase field modeling are adopted to investigate the peritectic solidification of a low-carbon steel. The results show that the peritectic reaction occurs at the temperature of 3.4 K lower than the equilibrium peritectic temperature, the γ-austenite first nucleates at the δ/L boundary, and then rapidly propagates along the δ/L boundary by the advance of the L/γ/δ triple point till the δ-ferrite is encircled by the γ austenite. The whole peritectic reaction process is very fast, and the measured and predicted average propagation velocity of L/γ/δ triple point along the δ/L boundary are, respectively, 1.36 and 1.09 mm/s. This small difference between the measurement and prediction means that the developed multiphase field model is capable of predicting the peritectic reaction and peritectic transformation during the peritectic solidification process of Fe-C alloy, and the peritectic reaction can be regarded as a solute diffusion-controlled process. With the increase of cooling rate and undercooling, the advancing velocities of L/γ/δ triple point, L/γ interface and γ/δ interface increase, and thus the γ-austenite between the liquid phase and δ phase becomes longer and thicker for the same elapsed time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Xia G, Bernhard C, IIie S, Fuerst C (2011) Steel Res Int 82:230-23610.1002/srin.201000196 ↗
2. 2. K. Matsuura, Y. Itoh and T.Narita: ISIJ Int., 1993, vol. 33, pp. 583-587.10.2355/isijinternational.33.583 ↗
3. 3. P. Presoly, R. Pierer and C. Bernhard: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5377-5388.10.1007/s11661-013-1671-5 ↗
4. 4. R. Sarkar, A. Sengupta, V. Kumar and S. K. Choudary: ISIJ Int., 2015, vol. 55, pp. 781-790.10.2355/isijinternational.55.781 ↗
5. 5. H. W. Kerr, J. Cisse and G. F. Bolling: Acta Mater., 1974, vol. 22, pp. 677-686.10.1016/0001-6160(74)90077-7 ↗
6. 6. H. Fredriksson and J. Stjerndahl: Metal Sci., 1982, vol. 16, pp. 575-585.10.1179/030634582790427136 ↗
7. 7. H. W. Kerr and W. Kurz: Int. Mater. Rev., 1996, vol. 41, pp. 129-164.10.1179/imr.1996.41.4.129 ↗
8. 8. D. M. Stefanescu: ISIJ Int., 2006, vol. 46, pp. 786-794.10.2355/isijinternational.46.786 ↗
9. 9. N. M. Xiao, Y. Chen, D. Z. Li and Y. Y. Li: Sci. China Technol. Sci., 2012, vol. 55, pp. 341-356.10.1007/s11431-011-4699-z ↗
10. 10. H. Fredriksson and T. Nylén: Metal Sci., 1982, vol. 16, pp. 283-294.10.1179/030634582790427370 ↗
11. 11. H. Shibata, Y. Arai, M. Suzuki and T. Emi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 981-991.10.1007/s11663-000-0074-3 ↗
12. 12. H. Nassar and H. Fredriksson: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2776-2783.10.1007/s11661-010-0289-0 ↗
13. 13. D. Phelan, M. Reid and R.Dippenaar: Mater. Sci. Eng. A, 2008, vol. 477A, pp. 226-232.10.1016/j.msea.2007.05.090 ↗
14. 14. M. Reid, D. Phelan and R. Dippenaar: ISIJ Int., 2004, vol. 44, pp. 565-572.10.2355/isijinternational.44.565 ↗
15. 15. S. Griesser, C. Bernhard, R. Dippenaar: Acta Mater., 2014, vol. 81, pp. 111-120.10.1016/j.actamat.2014.08.020 ↗
16. 16. S. Griesser, C. Bernhard and R. Dippenaar: ISIJ Int., 2014, vol. 54, pp. 466-473.10.2355/isijinternational.54.466 ↗
17. Steinbach I, Pezzolla F, Nestler B, Seeβelberg M, Prieler R, Schmitz GJ, Rezende JLL (1996) Physica D 94:135-147.10.1016/0167-2789(95)00298-7 ↗
18. 18. J. Tiaden, B. Nestler, H. J. Diepers and I. Steinbach: Physica D, 1998, vol. 115, pp. 73-86.10.1016/S0167-2789(97)00226-1 ↗
19. 19. J. Tiaden: J. Cryst. Growth, 1999, vol. 198-199, pp. 1275-1280.10.1016/S0022-0248(98)01009-4 ↗
20. 20. B. Nestler and A. Wheeler: Physica D, 2000, vol. 138, pp. 114-133.10.1016/S0167-2789(99)00184-0 ↗
21. 21. A. Choudhury, B. Nestler, A. Telang, M. Selzer and F. Wendler: Acta Mater., 2010, vol. 58, pp. 3815-3823.10.1016/j.actamat.2010.03.030 ↗
22. 22. J. S. Lee, S. G. Kim, W. T. Kim and T. Suzuki: ISIJ Int., 1999, vol. 39, pp. 730-736.10.2355/isijinternational.39.730 ↗
23. Kim SG, Kim WT, Suzuki T (1998) Phys Rev E 58:7186-719710.1103/PhysRevE.58.7186 ↗
24. 24. M. Ode, S. G. Kim, W. T. Kim and T. Suzuki: ISIJ Int., 2005, vol. 45, pp. 147-149.10.2355/isijinternational.45.147 ↗
25. 25. D. Phelan, M. Reid and R. Dippenaar: Comp. Mater. Sci., 2005, vol. 34, pp. 282-289.10.1016/j.commatsci.2005.02.006 ↗
26. 26. D. Phelan, M. Reid and R. Dippenaar: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 985-994.10.1007/s11661-006-0071-5 ↗
27. 27. M. Ohno and K. Matsuura: Acta Mater., 2010, vol. 58, pp. 5749-5758.10.1016/j.actamat.2010.06.050 ↗
28. 28. M. Ohno and K. Matsuura: ISIJ Int., 2010, vol. 50, pp. 1879-1885.10.2355/isijinternational.50.1879 ↗
29. 29. L. Zhang, M. Stratmann, Y. Du, B. Sundman and I. Steinbach: Acta Mater., 2015, vol. 88, pp. 156-169.10.1016/j.actamat.2014.11.037 ↗
30. 30. S. Y. Pan, M. F. Zhu and M. Rettenmayr: Acta Mater., 2017, vol. 132, pp. 565-575.10.1016/j.actamat.2017.04.053 ↗
31. 31. S. Y. Pan and M. F. Zhu: Acta Mater., 2018, vol. 146, pp. 63-75.10.1016/j.actamat.2017.12.034 ↗
32. 32. S. G. Kim, W. T. Kim, T. Suzuki and M. Ode: J. Crystal Growth, 2004, vol. 261, pp. 135-158.10.1016/j.jcrysgro.2003.09.017 ↗
33. 33. M. Ohno and K. Matsuura: Acta Mater., 2010, vol. 58, pp. 6134-6141.10.1016/j.actamat.2010.07.031 ↗
34. 34. M. Hillert: Solidification and Casting of Metals, 1st ed., The Metals Society, London, 1979, pp. 81.