Comparison of Methods for Quantification of Topologically Close-Packed Phases in Ni-Based Superalloys
Source abstract
Abstract
Abstract The ability to quantify accurately the formation of topologically close-packed phases in nickel-based superalloys is key to assessing their thermal stability and ensuring that their performances will not deteriorate during long-term exposure at high temperatures. To investigate the effectiveness of synchrotron XRD for the detection of such minority phases in Ni-based superalloys, the commercial polycrystalline alloy RR1000 was analyzed following exposures of varying times at 800 °C. Data were collected from both solid samples and extracted residues, and additional laboratory X-ray diffraction was performed on the residues. The minor phases were successfully detected in solid samples using synchrotron radiation, and a comparison of the results from these quantification methods shows that the extraction method gives results of the right order of magnitude to reflect the phase quantities that are present in the alloy. However, the results indicate that the synchrotron route is not a suitable method for the quantification of phases present in quantities less than approximately 0.3 wt pct.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. R. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, Cambridge, 2006, pp. 51-53.10.1017/CBO9780511541285 ↗
2. Q. Shi, X. Ding, J. Chen, X. Zhang, Y. Zheng, Q. Feng, Metall and Mat Trans A., 2014, vol. 45, pp. 1665–1669.10.1007/s11661-014-2190-8 ↗
3. Y. Liu, Y. Wu, M. Kang, M. Wang, M. Li, H. Gao, J. Wang, B. Sun, Y. Ning, Materials Science and Engineering: A., 2018, 736, pp. 438–452.10.1016/j.msea.2018.06.095 ↗
4. Z. Zhang, Z. Yue, Journal of Alloys and Compounds, 2018, 746, pp. 84–92.10.1016/j.jallcom.2018.02.133 ↗
5. S. Antonov, J. Huo, Q. Feng, D. Isheim, D.N. Seidman, R.C. Helmink, E. Sun, S. Tin, Materials Science and Engineering: A. 2017, 687, pp. 232–240.10.1016/j.msea.2017.01.064 ↗
6. R. Krakow, D.N. Johnstone, A.S. Eggemen, D. Hunert, M.C. Hardy, C.M.F. Rae, P. A. Midgley: Acta Mater., 2017, vol. 130, pp. 271–80.10.1016/j.actamat.2017.03.038 ↗
7. A.S. Wilson, Mats. Sci. Tech., 2016, 33, pp. 1108–1118.10.1080/02670836.2016.1187335 ↗
8. J.X. Yang, Q. Zheng, X.F. Sun, H.R. Guan, Z.Q. Hu, Scripta Materialia, 2006, 55, pp. 331–334.10.1016/j.scriptamat.2006.04.032 ↗
9. E04 Committee: Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte, ASTM International, 2010.
10. M.J. Donachie, O.H. Kriege: Phase Extraction and Analysis in Superalloys-Summary of Investigations by ASTM Committee E4 Task Group 1, 1972.
11. H.S. Lee, D.S. Kim, K.B. Yoo, K.S. Song: Met. Mater. Int., 2012, vol. 18, pp. 287–293.10.1007/s12540-012-2012-8 ↗
12. D.W. Hunt: Stability & mechanical properties of a nickel-base turbine disc alloy, 2001, University of Cambridge, Cambridge.
13. S.E. Kim, M.P. Jackson, R.C. Reed, C. Small, A. James, N.K. Park: Mater. Sci. Eng. A, 1998, vol. 245, pp. 225–232.10.1016/S0921-5093(97)00728-4 ↗
14. R.J. Mitchell, C.M.F. Rae, S. Tin: Mater. Sci. Technol., 2005, vol. 21, pp. 125–132.10.1179/174328405X16261 ↗
15. R.A. Mitchell: Development of a New Powder Processed Ni-Base Superalloy for Rotor Disc Application, 2004, University of Cambridge, Cambridge.
16. A.J. Manning: Development of a polycrystalline Ni base superalloy for gas turbine disc applications, 1999, University of Cambridge, Cambridge.
17. A.A. Coelho: TOPAS-Academic. Version 5. 2012, http://topas-academic.net/.
18. J.O. Andersson, T. Helander, L. Hoglund, P.F. Shi, B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
19. Thermo-Calc Software, Thermotech Ni-based Superalloys Database version 8.0.
20. N.S. Stoloff: International Metals Reviews, 1989, vol. 34, no. 4, pp. 153–183.10.1179/imr.1989.34.1.153 ↗
21. D. Tytko, P. Choi, J. Klower, A. Kostka, G. Inden, D. Raabe, Acta Materialia. 2012, 60, pp. 1731–1740.10.1016/j.actamat.2011.11.020 ↗
22. N.I. Medvedeva, D.C. Van Aken, J.E. Medvedeva: Computational Materials Science, 2015, vol. 96, pp. 159–164.10.1016/j.commatsci.2014.09.016 ↗
23. H.L. Yakel: Acta Crystallographica, 1983, vol. B39, pp. 20–28.10.1107/S0108768183001974 ↗
24. H.L. Yakel: Acta Crystallographica, 1983, vol. B39, pp. 28–33.10.1107/S0108768183001986 ↗
25. J.M. Joubert: Progress in Materials Science, 2008, vol. 53, pp. 528–583.10.1016/j.pmatsci.2007.04.001 ↗
26. E04 Committee: Test Methods for Determining Average Grain Size, ASTM International, 2014.