journal article·2018-11

The Friction Stress of the Hall–Petch Relationship of Pure Mg and Solid Solutions of Al, Zn, and Gd

D. Nagarajan, C. H. Cáceres

Publisher page

Abstract

Temperature and solute concentration effects on the friction stress, sigma(o), of cast (texture-free) polycrystals of pure Mg, and of Mg-Al, -Zn and -Gd binary solid solutions are discussed using phenomenological arguments. The temperature effects on the pure metal suggest that sigma(o) relates to the ratio between the CRSS of prism and basal slip, against early suggestions that it should only relate to the CRSS for basal slip. Solid solution softening upon prism slip accounts for the minima in sigma(o) at similar to 0.5 at. pct in Mg-Zn and Mg-Gd alloys. In the concentrated alloys, solute-specific hardening effects upon slip and twinning lead to diverging behaviors: in Mg-Al and Mg-Zn, sigma(o) remains below that of pure Mg. Strong short-range order by Gd leads to a steep monotonic increase, and to a value larger in compression than in tension due to the activation of {10-11} twinning at high concentrations. The negative sigma(o) of the dilute Mg-Zn alloys is an artifact created by the tension/compression asymmetry stemming from the polar character of {10-12} twinning. (C) The Minerals, Metals & Materials Society and ASM International 2018
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. C.H. Caceres, G.E. Mann, and J.R. Griffiths: Metall. Mater. Trans. A 2011, vol. 42A, pp. 1950-59.10.1007/s11661-010-0599-2 ↗
2. D. Nagarajan, C.H. Caceres, and J.R. Griffiths: Metall. Mater. Trans. A 2016, vol. 47A, pp. 5401-08.10.1007/s11661-016-3686-1 ↗
3. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: J. Mater. Sci. 2005, vol. 40, pp. 5999-6005.10.1007/s10853-005-1295-2 ↗
4. A. Akhtar and E. Teghtsoonian: Trans. Jpn. Inst. Metals 1968, vol. 9, supplement, pp. 692-97.
5. E.W. Kelley and W.F. Hosford: Trans. Metall. Soc. AIME 1968, vol. 242, pp. 5-13.
6. S.R. Agnew, M.H. Yoo, and C.N. Tomé: Acta Mater. 2001, vol. 49, pp. 4277-89.10.1016/S1359-6454(01)00297-X ↗
7. C.H. Cáceres and A. Blake: Phys. Status Solidi 2002, vol. 194, pp. 147-58.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
8. C.H. Cáceres and D.M. Rovera: J. Light Metals 2001, vol. 1/3, pp. 151-56.10.1016/S1471-5317(01)00008-6 ↗
9. S. Abaspour and C.H. Caceres: Metall. Mater. Trans. A 2015, vol. 46A, pp. 5972-88.10.1007/s11661-015-3128-5 ↗
10. S. Abaspour and C.H. Caceres: Metall. Mater. Trans. A 2016, vol. 47A, pp. 1313-21.10.1007/s11661-015-3292-7 ↗
11. S. Abaspour, V. Zambelli, M. Dargusch, and C.H. Cáceres: Mater. Sci. Eng. A 2016, vol. 673, pp. 114-21.10.1016/j.msea.2016.07.019 ↗
12. B. Raeisinia and S.R. Agnew: Scr. Mater. 2010, vol. 63, pp. 731-36.10.1016/j.scriptamat.2010.03.054 ↗
13. R.W. Armstrong, in: T.N. Baker (Ed.) Yield, Flow and Fracture of Polycrystals, Applied Science Publishers, London, 1983, pp. 1-31.
14. T.N. Baker, in: T.N. Baker (Ed.) Yield, Flow and Fracture of Polycrystals, Applied Science Publishers, London, 1983, pp. 235-73.
15. R. Armstrong, I. Codd, R.M. Douthwaite, and N.J. Petch: Philos. Mag. 1962, vol. 7, pp. 45-58.10.1080/14786436208201857 ↗
16. R.W. Armstrong: Acta Metall.1968, vol. 16, pp. 347-55.10.1016/0001-6160(68)90021-7 ↗
17. R.W. Armstrong, in: J.C.M. Li (Ed.) Mechanical Properties of Nanocrystalline Materials, Pan Stanford Publishing, C/o World Scientific Publishing Co., Inc., Hackensack, 2009.
18. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. Am. Soc. Metals 1956, vol. 48, pp. 986-1002.
19. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. Metall. Soc. AIME 1956, vol. 206, pp. 589-93.
20. A. Akhtar and E. Teghtsoonian: Acta Metall. 1969, vol. 17, pp. 1339-49.10.1016/0001-6160(69)90151-5 ↗
21. C.H. Cáceres and P. Lukác: Philos. Mag. A 2008, vol. 88, pp. 977-89.10.1080/14786430801968611 ↗
22. A. Akhtar and E. Teghtsoonian: Acta Metall. 1969, vol. 17, pp. 1351-56.10.1016/0001-6160(69)90152-7 ↗
23. N. Ono, R. Nowak, and S. Miura: Mater. Lett. 2004, vol. 58, pp. 39-43.10.1016/S0167-577X(03)00410-5 ↗
24. A. Jain, O. Duygulu, D.W. Brown, C.N. Tomé, and S.R. Agnew: Mater. Sci. Eng. A 2008, vol. 486, pp. 545-55.10.1016/j.msea.2007.09.069 ↗
25. H. Mecking, U.F. Kocks, and C. Hartig: Scr. Mater. 1996, vol. 35, pp. 465-71.10.1016/1359-6462(96)00137-6 ↗
26. W.B. Hutchinson and M.R. Barnett: Scr. Mater. 2010, vol. 63, pp. 737-40.10.1016/j.scriptamat.2010.05.047 ↗
27. U.F. Kocks: Metall. Trans. 1970, vol. 1, pp. 1121-43.10.1007/BF02900224 ↗
28. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Philos. Mag. 1999, vol. 79, pp. 1671-96.10.1080/01418619908210386 ↗
29. S.R. Agnew, D.W. Brown, and C.N. Tome: Acta Mater. 2006, vol. 54, pp. 4841-52.10.1016/j.actamat.2006.06.020 ↗
30. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel: Scr. Mater. 2003, vol. 48, pp. 1003-08.10.1016/S1359-6462(02)00591-2 ↗
31. U.F. Kocks and D.G. Westlake: Trans. AIME 1967, vol. 239, pp. 1107-09.
32. J. Koike: Metall. Mater. Trans. A 2005, vol. 36A, pp. 1689-96.10.1007/s11661-005-0032-4 ↗
33. O. Muránsky, D.G. Carr, P. Sittner, and E.C. Oliver: Int. J. Plast. 2009, vol. 25, pp. 1107-27.10.1016/j.ijplas.2008.08.002 ↗
34. D.V. Wilson and J.A. Chapman: Philos. Mag. 1963, vol. 8, pp. 1543-51.10.1080/14786436308207317 ↗
35. D.V. Wilson: J. Inst. Metals 1966, vol. 98, pp. 133-43.
36. G. Sambasiva Rao and Y.V.R.K. Prasad: Metall. Trans.A 1982, vol. 13A, pp. 2219-26.10.1007/BF02648393 ↗
37. C.H. Cáceres, P. Lukác, and A. Blake: Philos. Mag. A 2008, vol. 88, pp. 991-1003.10.1080/14786430701881211 ↗
38. G.-W. Chang, S.-Y. Chen, C. Zhou, X.-D. Yue, and Y.-h. Qi: Trans. Nonferrous Metals Soc. China 2010, vol. 20, pp. 289-93.10.1016/S1003-6326(09)60136-9 ↗
39. D. Kuhlmann-Wilsdorf: Metall. Mater. Trans. A 2004, vol. 35A, pp. 369-418.10.1007/s11661-004-0351-x ↗
40. C.H. Cáceres and A.H. Blake: Mater. Sci. Eng. A 2007, vol. 462, pp. 193-96.10.1016/j.msea.2005.12.113 ↗
41. C.H. Cáceres, J.R. Griffiths, C.J. Davidson, and C.L. Newton: Mater. Sci. Eng. 2002, vol. 325, pp. 344-55.10.1016/S0921-5093(01)01467-8 ↗
42. U.F. Kocks: P. Haasen, V. Gerold and G. Kostorz (Ed.) Strength of Metals and Alloys (ICSMA-5), Aachen, DR; Pergamon Press, New York, 1980, pp. 1661-80.
43. P. Lukáč: Czechoslov. J. Phys. B 1981, vol. 31, pp. 135-41.10.1007/BF01605313 ↗
44. S. Ando and H. Tonda: Mater. Sci. Forum 2003, vol. 419-422, pp. 87-92.10.4028/www.scientific.net/MSF.419-422.87 ↗
45. S. Ando and H. Tonda: Mater. Trans. (JIM) 2000, vol. 41, pp. 1188-91.10.2320/matertrans1989.41.1188 ↗
46. B.L. Wu, Y.H. Zhao, X.H. Du, Y.D. Zhang, F. Wagner, and C. Esling: Mater. Sci. Eng. A 2010, vol. 527, pp. 4334-40.10.1016/j.msea.2010.03.054 ↗
47. Z. Wu, R. Ahmad, B. Yin, S. Sandlöbes, and W.A. Curtin: Science 2018, vol. 359, pp. 447-52.10.1126/science.aap8716 ↗
48. A. Seeger, in: J.C. Fisher, W.G. Johnston, R. Thomson and T. Vreeland (Ed.) Dislocations and Mechanical Properties of Crystals, Chapman and Hall, London, 1957), pp. 243-329.
49. B. Raeisinia, S.R. Agnew, and A. Akhtar: Metall. Mater. Trans. A 2011, vol. 42A, pp. 1418-4130.10.1007/s11661-010-0527-5 ↗
50. S. Graff, W. Brocks, and D. Steglich: Int. J. Plast. 2007, vol. 23, pp. 1957-78.10.1016/j.ijplas.2007.07.009 ↗
51. G.E. Mann, T. Sumitomo, C.H. Cáceres, and J.R. Griffiths: Mater. Sci. Eng. A 2007, vol. 456, pp. 138-46.10.1016/j.msea.2006.11.160 ↗
52. K.J. Kurzydlowski and J.J. Bucki: Acta Metall. et Mater. 1993, vol. 41, pp. 3141-46. https://doi.org/10.1016/0956-7151(3193)90044-s10.1016/0956-7151(3193)90044-S ↗
53. D. Nagarajan, C.H. Caceres, and J.R. Griffiths: Acta Phys. Polonica A 2012, vol. 122, pp. 501-04.10.12693/APhysPolA.122.501 ↗
54. C.H. Cáceres, T. Sumitomo, and M. Veidt: Acta Mater. 2003, vol. 51, pp. 6211-18.10.1016/S1359-6454(03)00444-0 ↗
55. A. Kelly: Strong Solids, Clarendon Press, Oxford, 1973.
56. D. Nagarajan: Mater. Sci. Eng. A 2017, vol. 695, pp. 14-19.10.1016/j.msea.2017.03.094 ↗
57. J.D. Embury, in: A. Kelly and R.B. Nicholson (Ed.) Strengthening Methods in Crystals, Elsevier, London, 1972, pp. 331-402.
58. I. Baker and E.M. Schulson: Scr. Metall. 1989, vol. 23, pp. 345-48.10.1016/0036-9748(89)90379-7 ↗
59. F.R.N. Nabarro and F. de Villiers: Physics of Creep and Creep-Resistant Alloys, Taylor & Francis, London, 1995.
60. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi, and D. Letzig: Scr. Mater. 2010, vol. 63, pp. 725-30.10.1016/j.scriptamat.2009.12.033 ↗
61. N. Stanford, D. Atwell, and M.R. Barnett: Acta Mater. 2010, vol. 58, pp. 6773-83.10.1016/j.actamat.2010.09.003 ↗
62. N. Stanford and M.R. Barnett: Mater. Sci. Eng. A 2008, vol. 496, pp. 399-408.10.1016/j.msea.2008.05.045 ↗
63. J.D. Robson, A.M. Twier, G.W. Lorimer, and P. Rogers: Mater. Sci. Eng. A 2011, vol. 528, pp. 7247-56.10.1016/j.msea.2011.05.075 ↗
64. J. Zhang, M. Liu, Y. Dou, and G. Liu: Metall. Mater. Trans. A 2014, vol. 45A, pp. 5499-5507.10.1007/s11661-014-2526-4 ↗
65. D. Nagarajan, X. Ren, and C.H. Caceres: Mater. Sci. Eng. A 2017, vol. 696, pp. 387-92.10.1016/j.msea.2017.04.069 ↗
66. D. Nagarajan, X. Ren, C.H. Caceres, and J.R. Griffiths: Mg 2012: 9th International Conference on Magnesium Alloys and their Applications, University of British Columbia, Vancouver, 2012, pp. 559-63.
67. ASTM, (ASTM International, 2002), vol. E562-02, pp. 1-7.