journal article·2017-02

Microtexture Analysis and Modeling of Ambient Fatigue and Creep-Fatigue Damages in Ti-6Al-4V Alloy

Jalaj Kumar, A. K. Singh, S. Ganesh Sundara Raman, Vikas Kumar

Publisher page

Abstract

In the present investigation, microtexture analysis using electron back-scattered diffraction technique has been performed to study fatigue- and creep-fatigue damages and associated deformation structures in Ti-6Al-4V alloy. Special emphasis has been given to low-angle grain boundary configuration and its possible application as a damage indicator. Damage is mostly present in the form of voids as investigated through scanning electron microscopy. Stored deformation energies have been evaluated for the strain-controlled fatigue-, the stress-controlled fatigue-, and the creep-fatigue-tested samples. Stored deformation energies have also been analyzed vis-a-vis total damage energies to quantify the contribution of damages to various samples. A relation between the stored deformation energy and the applied strain amplitude has been proposed in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. R.C Picu and A. Majorell, Mater. Sci. Engg. A, 326 (2002) 306-316.10.1016/S0921-5093(01)01508-8 ↗
2. M.R. Bache, Int. J. Fatigue, 25 (2003) 1079-1087.10.1016/S0142-1123(03)00145-2 ↗
3. A. Wolfenden, Scripta Met., 4 (1970) 327-332.10.1016/0036-9748(70)90094-3 ↗
4. D. Kuhlmann-Wilsdorf and A. Wolfenden, Scripta Met., 3 (1969) 503-506.10.1016/0036-9748(69)90139-2 ↗
5. M. Naderi, A. Kahirdeh and M.M. Khonsari, Composites: Part B, 43 (2012) 1613–1620.10.1016/j.compositesb.2011.08.002 ↗
6. V. Maurel, L. Rémy, F. Dahmen and N. Haddar, Int. J. Fatigue, 31 (2009) 952–961.10.1016/j.ijfatigue.2008.09.004 ↗
7. J. Kumar, S.G.S. Raman, and V. Kumar: J. Nondestruct. Eval., 2016, vol. 35, pp. 1–10.10.1007/s10921-015-0318-4 ↗
8. P. Castany, F. Pettinari-Sturmel, J. Crestoum, J. Douin and A. Coujou, Acta Mater., 55 (2007) 6284-6291.10.1016/j.actamat.2007.07.032 ↗
9. J. Warren and D.Y. Wei, Int. J. Fatigue, 32 (2010) 1853-1861.10.1016/j.ijfatigue.2010.05.003 ↗
10. V. Sinha, J.E. Spowart, M.J. Mills and J.C. Williams, Met. Trans. A, 37A (2006) 1507-1518.10.1007/s11661-006-0095-x ↗
11. D. R Swalla and R. W. Neu, Tribology Int., 39 (2006) 1016-1027.10.1016/j.triboint.2006.02.039 ↗
12. K. Le Biavant, S. Pommier and C. Prioul, Fat. Frat. Engg. Mater. Struct., 25 (2002) 527-545.10.1046/j.1460-2695.2002.00480.x ↗
13. I. Bantounas, T.C. Lindley, D. Rugg and D. Dye, Acta Mater., 55 (2007) 5655-5665.10.1016/j.actamat.2007.06.034 ↗
14. Z.F. Zhang, H.C. Gu and X.L. Tan, Mater. Sci. Eng. A, 252 (1998) 85-92.10.1016/S0921-5093(98)00650-9 ↗
15. F. Bridier, P. Villechaise and J. Mendez, Acta Mater., 56 (2008) 3951-3962.10.1016/j.actamat.2008.04.036 ↗
16. F. Bridier, P. Villechaise and J. Mendez, Acta Mater., 53 (2005) 555-567.10.1016/j.actamat.2004.09.040 ↗
17. P.D. Littlewood and A.J. Wilkinson, Int. J. Fatigue, 43 (2012) 111-119.10.1016/j.ijfatigue.2012.03.001 ↗
18. L. Xio and Y. Umakoshi, Mater. Sci. Engg. A, 339 (2003) 63-72.10.1016/S0921-5093(02)00104-1 ↗
19. H. Li, D.E. Mason, T.R. Bieler, C.J. Boehlert and M.A. Crimp, Acta Mater., 61 (2013) 7555-7567.10.1016/j.actamat.2013.08.042 ↗
20. H. Li, C.J. Boehlert, T.R. Bieler and M. A. Crimp, Met. Trans. A, 45A (2014) 6053-6066.10.1007/s11661-014-2576-7 ↗
21. S. Suri, G.B. Viswanathan, T. Neeraj, D-H. Hou and M.J. Mills, Acta Mater., 47 (1999) 1019-1034.10.1016/S1359-6454(98)00364-4 ↗
22. T. Neeraj, M.F. Savage, J. Tatalovich, L. Kovarik, R.W. Hayes and M. J. Mills, Phil. Mag., 85 (2-3) (2005) 279-295.10.1080/14786430412331315707 ↗
23. D. Deka, D.S. Joseph, S. Ghosh and M.J. Mills, Met. Mater. Trans., 37A (2006)1371-1388.10.1007/s11661-006-0082-2 ↗
24. M.F. Savage, J. Tatalovich, M. Zupan, K.J. Hemker and M.J. Mills, Mater. Sci. Engg. A, 319-321 (2001) 398-403.10.1016/S0921-5093(01)01024-3 ↗
25. J. Geathers, C.J. Torbet, J.W. Jones and S. Daly, Int. J. Fatigue, 70 (2015) 154-162.10.1016/j.ijfatigue.2014.09.007 ↗
26. J. Jiang, T.B. Britton and A.J. Wilkinson, Acta Mater., 94 (2015) 193-204.10.1016/j.actamat.2015.04.031 ↗
27. M. Kamaya. Mater. Charact., 60 (2009) 1454-1462.10.1016/j.matchar.2009.07.003 ↗
28. M. Kamaya. Fat. Fract. Eng. Mater. Struct., 33 (2010) 94-104.10.1111/j.1460-2695.2009.01420.x ↗
29. M. Kamaya and M. Kuroda. Mater. Charact., 52 (2011) 1168-76.
30. P.D. Littlewood, T.B. Britton and A.J. Wilkinson, Acta Mater., 59 (2011) 6489-6500.10.1016/j.actamat.2011.07.016 ↗
31. P.D. Littlewood and A.J. Wilkinson, Acta Mater., 60 (2012) 5516-5525.10.1016/j.actamat.2012.07.003 ↗
32. F.P.E. Dunne, Current Opinion in Solid State and Materials Science, 18 (2014) 170-179.10.1016/j.cossms.2014.02.005 ↗
33. T.B. Britton and A.J. Wilkinson, Acta Mater., 60 (2012) 5773-5782.10.1016/j.actamat.2012.07.004 ↗
34. C. J. Szczepanski, S. K. Jha, P. A. Shade, R. Wheeler, J. M. Larsen, Int. J. Fatigue, 57 (2013) 131-139.10.1016/j.ijfatigue.2012.08.008 ↗
35. M. Gerland, P. Lefranc, V. Doquet, C. Sarrazin-Baudoux, Mater. Sci. Engg. A, 507 (2009) 132-143.10.1016/j.msea.2008.11.045 ↗
36. J. White, M.H. Loretto, and R.E.S. Smalman: Proc. 5th Int. Conf. Titanium, vol. 4, DGM, Oberusel, 1984, pp. 2297–2304.
37. P.O. Tympel, T.C. Lindley, E.A. Saunders, M. Dixon, D. Dye, Acta Mater., 103 (2016) 77-88.10.1016/j.actamat.2015.09.014 ↗
38. M.A. Sangid, Int. J. Fatigue, 57 (2013) 58-72.10.1016/j.ijfatigue.2012.10.009 ↗
39. A.S. Beranger, X. Feaugas and M. Clavel, Mater. Sci. Engg. A, 172 (1993) 31-41.10.1016/0921-5093(93)90423-C ↗
40. X. Feaugas and M. Clavel, Acta Mater., 45 (1997) 2685-2701.10.1016/S1359-6454(96)00406-5 ↗
41. P. Konijnenberg, S. Zaefferer, D. Rabbe,Acta Mater.,99 (2015) 402-414.10.1016/j.actamat.2015.06.051 ↗
42. J. Jiang, J. Yang, T. Zhang, F. P.E. Dunne and T. B. Britton, Acta Mater., 97 (2015) 367-379.10.1016/j.actamat.2015.06.035 ↗
43. F.J. Humphreys, M. Hatherly, In: Recrystallization and Related Annealing Phenomena; Elsevier Ltd, U.K. (2004).
44. F.P.E. Dunne and D. Rugg, Fat. Fract. Engg. Mat. Struct., 31 (2008) 949-958.10.1111/j.1460-2695.2008.01284.x ↗
45. G.Kang, Y. Dong, Y. Liu and H. Jiang, Mater. Charact., 92 (2014) 26-35.10.1016/j.matchar.2014.02.014 ↗
46. J. Peng, C.Y. Zhou, Q. Dai and X.H. He, Mater. Design, 71 (2015) 1-16.10.1016/j.matdes.2015.01.007 ↗
47. J. Kumar, S.G.S. Raman, and V. Kumar: Trans. IIM, 2016, vol. 69, pp. 349-352.
48. H. Kronmuller and M. Wilkens, Scripta Met., 3 (1969) 495-502.10.1016/0036-9748(69)90138-0 ↗
49. W.Q. Cao, C.F. Gu, E.V. Pereloma and C.H.J. Davis, Mater. Sci. Engg. A, 492 (2008) 74-79.10.1016/j.msea.2008.02.048 ↗
50. M. Taheri, W. Weiland and A.D. Rollett, Met. Mater. Trans. A, 37 (2006) 19-25.10.1007/s11661-006-0148-1 ↗
51. J. Nye, Acta Metall., 1 (1953) 153-162.10.1016/0001-6160(53)90054-6 ↗
52. Q. Sun, Q. Guo, X. Yao, L. Xiao, J.E. Greer and J. Sun, Scripta Mater., 65 (2011) 473-476.10.1016/j.scriptamat.2011.05.033 ↗