Microstructure Evolution in the Near-Surface Region During Homogenization of a Twin-Roll Cast AlFeMnSi Alloy
Source abstract
Abstract
Abstract A near-surface deformed layer, comprising ultrafine grains of 50-500 nm diameters with the grain boundaries being decorated by a high population density of fine cubicα-Al15(FeMn)3Si2dispersoids and oxide/lubricant particles, was generated in a foil stock AlFeMnSi alloy during twin-roll casting due to severe shear deformation within the near-surface region. During a subsequent multi-step homogenization treatment at temperatures in the range of 713 K and 853 K (440 °C and 580 °C), the fine cubicα-Al15(FeMn)3Si2dispersoids within the near-surface layer were dissolved, while sparse, large lath-shaped Al3Fe particles formed in the same region. Significant grain growth took place within the near-surface layer due to the loss of grain boundary pinning by the dispersoids, leading to the removal of the ultrafine-grained microstructure within the near-surface region. However, at local regions where the population density of oxide particles was sufficiently high to provide grain boundary pinning, the ultrafine-grained microstructure was preserved within the near-surface layer.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. Li, X. Zhou, G.E. Thompson, J.A. Hunter and Y. Yuan: Mater. Sci. Forum, 2013, vol. 765, pp. 358-62.10.4028/www.scientific.net/MSF.765.358 ↗
2. X. Zhou, Y. Liu, G.E. Thompson, G. Scamans, P. Skeldon and J. Hunter: Metall. Mater. Trans. A, 2011,vol. 42A, pp. 1373-85.10.1007/s11661-010-0538-2 ↗
3. Y. Liu, M.F. Frolish, W.M. Rainforth, X. Zhou, G.E. Thompson, G.M. Scamans and J.A. Hunter: Surf. Interface Anal., 2010, vol. 42, pp. 180-84.10.1002/sia.3135 ↗
4. G.M. Scamans, M.F. Frolish, W.M. Rainforth, Z. Zhou, Y. Liu, X. Zhou and G.E. Thompson: Surf. Interface Anal., 2010,vol.42, pp. 175-79.10.1002/sia.3204 ↗
5. G.M. Scamans, A. Afseth, G.E. Thompson and X. Zhou: Proc. 2nd Int. Conf. Alum. Surf. Sci. Technol., Manchester, UK, 2000, pp. 9–16.
6. H. Leth-Olsen, J.H. Nordlien and K. Nisancioglu: Corros. Sci., 1998,vol. 40, pp. 2051-63.10.1016/S0010-938X(98)00094-8 ↗
7. M. Fishkis and J.C. Lin: Wear, 1997, vol. 206, pp. 156-70.10.1016/S0043-1648(96)07480-7 ↗
8. J. Wang, X. Zhou, G.E. Thompson, J.A. Hunter and Y. Yuan: Mater. Charact., 2015, vol. 99, pp. 109-17.10.1016/j.matchar.2014.11.011 ↗
9. B. Liu, X. Zhou: Mater. Sci. Forum, 2014,vols. 794-796, pp. 217-22.10.4028/www.scientific.net/MSF.794-796.217 ↗
10. Y. Liu, A. Laurino, T. Hashimoto, X. Zhou, P. Skeldon, G.E. Thompson, G.M. Scamans, C. Blanc, W.M. Rainforth and M.F. Frolish:Surf. Interface Anal., 2010, vol. 42, pp. 185-88.10.1002/sia.3136 ↗
11. Y. Liu, X. Zhou, G.E. Thompson, T. Hashimoto, G.M. Scamans and A. Afseth: Acta. Mater., 2007, vol. 55, pp. 353-60.10.1016/j.actamat.2006.08.025 ↗
12. P. Premendra, J.H. Chen, F.D. Tichelaar, H. Terryn, J.H.W. deWit and L. Katgerman: Surf. Coat. Technol., 2007,vol. 201, pp. 4561-70.10.1016/j.surfcoat.2006.09.090 ↗
13. X. Zhou, G.E. Thompson and G.M. Scamans: Corros. Sci., 2003, vol. 45, pp. 1767-77.10.1016/S0010-938X(03)00003-9 ↗
14. A. Afseth, J.H. Nordlien, G.M. Scamans and K. Nisancioglu: Corros. Sci., 2001, vol. 43, pp. 2093-2109.10.1016/S0010-938X(01)00014-2 ↗
15. K. Nisancioglu, J.H. Nordlien, A. Afseth and G.M. Scamans: Mater. Sci. Forum, 2000, vols. 331-337, pp. 111-26.10.4028/www.scientific.net/MSF.331-337.111 ↗
16. I. Lindseth: PhD Thesis, Norwegian University of Science and Technology, Trondheim, 1999.
17. H. Leth-Olsen and K. Nisancioglu: Corros. Sci., 1998, vol. 40, pp. 1179-94.10.1016/S0010-938X(98)00026-2 ↗
18. H. Leth-Olsen, A. Afseth and K. Nisancioglu: Corros. Sci., 1998,vol. 40, pp. 1195-1214.10.1016/S0010-938X(98)00025-0 ↗
19. A. Afseth, J.H. Nordlien, G.M. Scamans andK. Nisancioglu: Corros. Sci., 2001,vol. 43, pp. 2359-77.10.1016/S0010-938X(01)00019-1 ↗
20. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Amsterdam, 2004.
21. J. Wang, X. Zhou, G.E. Thompson, J.A. Hunter and Y. Yuan: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2688-95.10.1007/s11661-015-2877-5 ↗
22. M. Slamova, V. Ocenasek, M. Cieslar, B. Chalupa and P. Merle: Mater. Sci. Forum, 2000, vols. 331-337, pp. 829-34.10.4028/www.scientific.net/MSF.331-337.829 ↗
23. Y. Birol and F. Sertcelik: Int. J. Mater. Res., 1999, vol. 90, pp. 329-34.10.1515/ijmr-1999-900504 ↗
24. G.M. Scamans, A. Afseth, G.E. Thompson and X. Zhou: Mater. Sci. Forum, 2002, vols. 369-402, pp. 1461-66.10.4028/www.scientific.net/MSF.396-402.1461 ↗
25. N.A. Belov, D.G. Eskin and A.A. Axenov: Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys, Elsevier, Amsterdam, 2005, pp. 1-10.10.1016/B978-008044537-3/50001-9 ↗
26. M. Warmuzek, K. Rabczak and J. Sieniawski: J. Mater. Process. Technol., 2005, vols. 162-163, pp. 422-28.10.1016/j.jmatprotec.2005.02.030 ↗