journal article·2016-06

Microstructure and Texture Through Thixomolding and Thermomechanical Processing and the Role of Mg17Al12 Particles

Tracy D. Berman, Tresa M. Pollock, J. Wayne Jones

Publisher page

Abstract

Thixomolding and thermomechanical processing (TTMP) is a pathway through which it is possible to produce Mg alloy sheet with both a fine grain size and a weak basal texture. Following static recrystallization, the texture of TTMP AZ61 is comparable to that of rare-earth Mg alloy sheets. The β-Mg17Al12 particles in the alloy serve several important roles. Pinning during rolling retards dynamic recrystallization, thereby preventing the development of the typical Mg sheet deformation texture. Recrystallized grains form near clusters of β-particles and in the grain mantle regions. Larger β-particles pin boundaries during subsolvus thermal exposures and therefore provide grain size stability during annealing. The size and spatial arrangement of the β-particles are relatively stable during processing, so modifications to optimize the texture reduction or grain size stability would require changes in composition or modifications in the Thixomolding parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (91)

Show source-provided references
1. [1] I. Polmear: Light Alloys: From Traditional Alloys to Nanocrystals, 4th ed., Elselvier, Oxford, 2006.
2. [2] J.A. Chapman and D.V. Wilson: J. Inst. Met., 1962, vol. 91, pp. 39–40.
3. [3] M.R. Barnett, D.L. Atwell, and A.G. Beer: Mater. Sci. Forum, 2007, vol. 558-559, pp. 433–40.10.4028/www.scientific.net/MSF.558-559.433 ↗
4. [4] A. Yamashita, Z. Horita, and T. Langdon: Mater. Sci. Eng. A, 2001, vol. 300, pp. 142–47.10.1016/S0921-5093(00)01660-9 ↗
5. [5] C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 459, pp. 355–60.10.1016/j.msea.2007.01.008 ↗
6. [6] A. Jain, O. Duygulu, D. Brown, C. Tome, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
7. [7] B.Q. Shi, R.S. Chen, and W. Ke: J. Magnes. Alloy., 2013, vol. 1, pp. 210–16.10.1016/j.jma.2013.09.001 ↗
8. [8] Q. Miao, L.X. Hu, G.J. Wang, and E. Wang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6694–6701.10.1016/j.msea.2011.05.023 ↗
9. [9] A. Sadeghi, S. Shook, and M. Pekguleryuz: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7529–36.10.1016/j.msea.2011.06.060 ↗
10. [10] C.W. Chung, R.G. Ding, Y. Chino, M.A. Hodgson, and W. Gao: IOP Conf. Ser. Mater. Sci. Eng., 2009, vol. 4, p. 012012.10.1088/1757-899X/4/1/012012 ↗
11. [11] T. Mukai, T. Mohri, M. Mabuchi, M. Nakamura, K. Ishikawa, and K. Higashi: Scr. Mater., 1998, vol. 39, pp. 1249–53.10.1016/S1359-6462(98)00296-6 ↗
12. [12] A. Bussiba, A. Benartzy, A. Shtechman, S. Ifergan, and M. Kupiec: Mater. Sci. Eng. A, 2001, vol. 302, pp. 56–62.10.1016/S0921-5093(00)01354-X ↗
13. [13] Y. Miyahara, K. Matsubara, Z. Horita, and T.G. Langdon: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1705–11.10.1007/s11661-005-0034-2 ↗
14. [14] T. Mohri, M. Mabuchi, M. Nakamura, T. Asahina, H. Iwasaki, T. Aizawa, and K. Higashi: Mater. Sci. Eng. A, 2000, vol. 290, pp. 139–44.10.1016/S0921-5093(00)00959-X ↗
15. [15] K. Matsubara, Y. Miyahara, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 3073–84.10.1016/S1359-6454(03)00118-6 ↗
16. [16] R. Lapovok, P. Thomson, R. Cottam, and Y. Estrin: Mater. Sci. Eng. A, 2005, vol. 410-411, pp. 390–93.10.1016/j.msea.2005.08.067 ↗
17. [17] S.R. Agnew and O. Duygulu: Int. J. Plast., 2005, vol. 21, pp. 1161–93.10.1016/j.ijplas.2004.05.018 ↗
18. [18] M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, pp. 8–16.10.1016/j.msea.2007.02.109 ↗
19. [19] N. Stanford, D. Atwell, and M.R. Barnett: Acta Mater., 2010, vol. 58, pp. 6773–83.10.1016/j.actamat.2010.09.003 ↗
20. [20] S.R. Agnew, M.H. Yoo, and C.N. Tome: Acta Mater., 2001, vol. 49, pp. 4277–89.10.1016/S1359-6454(01)00297-X ↗
21. [21] K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi, and D. Letzig: Scr. Mater., 2010, vol. 63, pp. 725–30.10.1016/j.scriptamat.2009.12.033 ↗
22. [22] J.P. Hadorn, K. Hantzsche, S.B. Yi, J. Bohlen, D. Letzig, J.A. Wollmershauser, and S.R. Agnew: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1347–62.10.1007/s11661-011-0923-5 ↗
23. [23] J. Bohlen, M.R. Nurnberg, J.W. Senn, D. Letzig, and S.R. Agnew: Acta Mater., 2007, vol. 55, pp. 2101–12.10.1016/j.actamat.2006.11.013 ↗
24. [24] B. Radhakrishnan, S.B. Gorti, G.M. Stoica, G. Muralidharan, A.D. Stoica, X.-L. Wang, E.D. Specht, E. Kenik, and T. Muth: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1509–16.10.1007/s11661-011-0896-4 ↗
25. [25] X.S. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito: J. Alloys Compd., 2009, vol. 470, pp. 263–68.10.1016/j.jallcom.2008.02.029 ↗
26. [26] Y. Chino, M. Mabuchi, R. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shimojima, and H. Iwasaki: Mater. Trans., 2002, vol. 43, pp. 2554–60.10.2320/matertrans.43.2554 ↗
27. [27] W.J. Kim, J.D. Park, and W.Y. Kim: J. Alloys Compd., 2008, vol. 460, pp. 289–93.10.1016/j.jallcom.2007.06.050 ↗
28. [28] W.J. Kim, J.B. Lee, W.Y. Kim, H.T. Jeong, and H.G. Jeong: Scr. Mater., 2007, vol. 56, pp. 309–12.10.1016/j.scriptamat.2006.09.034 ↗
29. [29] Y. Chino, K. Sassa, and M. Mabuchi: J. Mater. Sci., 2009, vol. 44, pp. 1821–27.10.1007/s10853-009-3248-7 ↗
30. [30] H. Zhang, G.S. Huang, D.Q. Kong, G.F. Sang, and B. Song: J. Mater. Process. Technol., 2011, vol. 211, pp. 1575–80.10.1016/j.jmatprotec.2011.04.009 ↗
31. [31] G.S. Huang, H.C. Li, B. Song, and L. Zhang: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 28–33.10.1016/S1003-6326(09)60092-3 ↗
32. [32] M. Masoumi, F. Zarandi, and M. Pekguleryuz: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1268–79.10.1016/j.msea.2010.10.003 ↗
33. I. Bayandorian, I. Stone, Y. Huang, and Z.Y. Fan: Magnesium Technology 2010 Proceedings TMS, S.N. Mathaudhu, W.H. Sillekens, N. Hort, and N.R. Neelameggham, eds., Wiley, Hoboken, New Jersey, 2012, pp. 135–40.
34. [34] X.S. Huang, K. Suzuki, Y. Chino, and M. Mabuchi: J. Alloys Compd., 2011, vol. 509, pp. 7579–84.10.1016/j.jallcom.2011.04.132 ↗
35. [35] Y. Chino and M. Mabuchi: Scr. Mater., 2009, vol. 60, pp. 447–50.10.1016/j.scriptamat.2008.11.029 ↗
36. [36] X.S. Huang, K. Suzuki, and Y. Chino: Mater. Sci. Eng. A, 2012, vol. 538, pp. 281–87.10.1016/j.msea.2012.01.044 ↗
37. [37] M. Masoumi, F. Zarandi, and M.O. Pekguleryuz: Scr. Mater., 2010, vol. 62, pp. 823–26.10.1016/j.scriptamat.2010.02.003 ↗
38. [38] F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Netherlands, 2004.
39. [39] J. D. Robson, D. T. Henry, and B. Davis: Acta Mater., 2009, vol. 57, pp. 2739–47.10.1016/j.actamat.2009.02.032 ↗
40. [40] J.D. Robson, D.T. Henry, and B. Davis: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4239–47.10.1016/j.msea.2011.02.030 ↗
41. M.O. Pekguleryuz: Advances in Wrought Magnesium Alloys., C. Bettles and M.R. Barnett, eds., Woodhead Publishing, Cambridge, UK, 2012, pp. 3–62.10.1533/9780857093844.1.3 ↗
42. [42] E.A. Ball and P.B. Prangnell: Scr. Metall. Mater., 1994, vol. 31, pp. 111–16.10.1016/0956-716X(94)90159-7 ↗
43. [43] F. Czerwinski, A. Zielinska-Lipiec, P.J. Pinet, and J. Overbeeke: Acta Mater., 2001, vol. 49, pp. 1225–35.10.1016/S1359-6454(01)00015-5 ↗
44. [44] Z. Zhen, M. Qian, S. Ji, and Z. Fan: Scr. Mater., 2006, vol. 54, pp. 207–11.10.1016/j.scriptamat.2005.09.032 ↗
45. R.F. Decker, S. Kulkarni, and J. Huang: Proceedings of the Magnesium Technology 2009 TMS, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., Wiley, Hoboken, New Jersey, 2009, pp. 357–61.
46. J. Huang, T. Arbel, L. Ligeski, J. Mccaffrey, S. Kulkarni, J.W. Jones, T.M. Pollock, R. F. Decker, and S. Lebeau: Proceedings of the Magnesium Technology 2010 TMS, S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, eds., Wiley, Hoboken, New Jersey, 2010, pp. 489–93.
47. T.D. Berman, W. Donlon, R. F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Proceedings of the Magnesium Technology 2011 TMS, W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, eds., Wiley, Hoboken, New Jersey, 2011, pp. 599–603.10.1002/9781118062029.ch110 ↗
48. T.D. Berman, W. Donlon, R.F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Magnesium: Proceedings of the 9th International Conference on Magnesium Alloys and Their Applications, W. J. Poole and K.U. Kainer, eds., ICMAA2012, Vancouver, Canada, 2012, pp. 571–78.
49. T.D. Berman, W. Donlon, V.M. Miller, R.F. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Proceedings of the Magnesium Technology 2012, TMS, S.N. Mathaudhu, W.H. Sillekens, N. Hort, and N.R. Neelameggham, eds., Wiley, Hoboken, New Jersey, 2012, pp. 339–44.10.1002/9781118359228.ch62 ↗
50. T.D. Berman, W Donlon, C K Hung, P Milligan, R. F. Decker, T.M. Pollock, and J W Jones: Proceedings of the Magnesium Technology 2013, TMS, N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, eds., Wiley, Hoboken, New Jersey, 2013, pp. 113–18.10.1002/9781118663004.ch19 ↗
51. T.D. Berman, W. Donlon, R.F. Decker, T.M. Pollock, and J.W. Jones: Proceedings of the Magnesium Technology 2014, TMS, M. Alderman, M.V. Manuel, N. Hort, and N.R. Neelameggham, eds., Wiley, Hoboken, New Jersey, 2014, pp. 161–66.10.1002/9781118888179.ch33 ↗
52. [52] W L Roberts: Cold Rolling of Steel, MARCEL DEKKER, INC., New York, 1978.
53. [53] C.A. Schneider, W.W. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
54. T.D. Berman: Ph.D. Thesis, Univeristy of Michigan, Ann Arbor, 2014.
55. H.I. Laukli: Ph.D. Thesis, Norwegian University of Science and Technology, 2004.
56. J.H. Forsmark, Z. Dowling, K. Gibson, C. Mueller, L. Godlewski, J. Zindel, and J. Boileau: SAE Int. J. Mater. Manuf., 2015, vol. 8, pp. 714–21.10.4271/2015-01-0510 ↗
57. [57] S. Barbagallo, H.I. Laukli, O. Lohne, and E. Cerri: J. Alloys Compd., 2004, vol. 378, pp. 226–32.10.1016/j.jallcom.2003.11.174 ↗
58. [58] F. Czerwinski: Mater. Sci. Eng. A, 2005, vol. 392, pp. 51–61.10.1016/j.msea.2004.09.008 ↗
59. [59] T.K. Nandy, R.M. Messing, J.W. Jones, T.M. Pollock, D.M. Walukas, and R.F. Decker: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3725–36.10.1007/s11661-006-1066-y ↗
60. [60] L.J. Yang, Y.H. Wei, and L.F. Hou: J. Mater. Sci., 2010, vol. 45, pp. 3626–34.10.1007/s10853-010-4408-5 ↗
61. J.H. Park, T.H. Ahn, H.S. Choi, J.M. Chung, D.I. Kim, K.H. Oh, and H.M. Han: Microsc. Microanal., 2013, vol. 19, pp. 21–24.10.1017/S1431927613012257 ↗
62. [62] S. Dziaszyk, E.J. Payton, F. Friedel, V. Marx, and G. Eggeler: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7854–64.10.1016/j.msea.2010.08.063 ↗
63. [63] A.L. Helbert, W. Wang, T. Baudin, and R. Penelle: Adv. Eng. Mater., 2012, vol. 14, pp. 39–44.10.1002/adem.201100165 ↗
64. [64] A.G. Beer and M.R. Barnett: Scr. Mater., 2009, vol. 61, pp. 1097–1100.10.1016/j.scriptamat.2009.09.002 ↗
65. [65] J.J. Li, S.H. Kim, T.M. Lee, P.E. Krajewski, H. Wang, and S.J. Hu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3905–14.10.1016/j.msea.2010.12.014 ↗
66. [66] A. Yanagida and J. Yanagimoto: Mater. Sci. Eng. A, 2008, vol. 487, pp. 510–17.10.1016/j.msea.2007.11.031 ↗
67. [67] R.A.P. Djaic and J.J. Jonas: Metall. Trans., 1973, vol. 4, pp. 621–24.10.1007/BF02648720 ↗
68. [68] Y.B. He, Q.L. Pan, Y.J. Qin, X.Y. Liu, W.B. Li, Y.L. Chiu, and J.J.J. Chen: J. Alloys Compd., 2010, vol. 492, pp. 605–10.10.1016/j.jallcom.2009.11.192 ↗
69. [69] H.Y. Chao, H.F. Sun, W.Z. Chen, and E.D. Wang: Mater. Charact., 2011, vol. 62, pp. 312–20.10.1016/j.matchar.2011.01.007 ↗
70. [70] S.R. Wang, S.G. Kang, and J.H. Cho: J. Mater. Sci., 2009, vol. 44, pp. 5475–84.10.1007/s10853-009-3762-7 ↗
71. [71] X.Y. Yang, Y. Okabe, H. Miura, and T. Sakai: Mater. Des., 2012, vol. 36, pp. 626–32.10.1016/j.matdes.2011.12.001 ↗
72. [72] C.W. Su, L. Lu, and M.O. Lai: Philos. Mag., 2008, vol. 88, pp. 181–200.10.1080/14786430701805566 ↗
73. [73] A.G. Beer and M.R. Barnett: Mater. Sci. Eng. A, 2008, vol. 485, pp. 318–24.10.1016/j.msea.2007.08.001 ↗
74. M.C. Weinberg, III Birnie, D.P, and V.A. Shneidman: J. Non. Cryst. Solids, 1997, vol. 219, pp. 89–99.10.1016/S0022-3093(97)00261-5 ↗
75. [75] P.D. Hodgson and R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 329–38.10.2355/isijinternational.32.1329 ↗
76. [76] J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
77. [77] J.P. Hadorn, K. Hantzsche, S.B. Yi, J. Bohlen, D. Letzig, and S.R. Agnew: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1363–75.10.1007/s11661-011-1018-z ↗
78. [78] P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
79. [79] T.D. Berman, T.M. Pollock, and J.W. Jones: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2986–98.10.1007/s11661-015-2913-5 ↗
80. [80] J.J. Bhattacharyya, S.R. Agnew, and G. Muralidharan: Acta Mater., 2015, vol. 86, pp. 80–94.10.1016/j.actamat.2014.12.009 ↗
81. [81] S.B. Yi, J. Bohlen, F. Heinemann, and D. Letzig: Acta Mater., 2010, vol. 58, pp. 592–605.10.1016/j.actamat.2009.09.038 ↗
82. [82] L. Jin, J. Dong, R. Wang, and L.M. Peng: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1970–74.10.1016/j.msea.2009.11.047 ↗
83. [83] J. Koike: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1689–96.10.1007/s11661-005-0032-4 ↗
84. [84] M. Eddahbi, J. Valle, M. Perezprado, and O. Ruano: Mater. Sci. Eng. A, 2005, vol. 410-411, pp. 308–11.10.1016/j.msea.2005.08.081 ↗
85. [85] H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, and C.N. Tomé: Int. J. Solids Struct., 2010, vol. 47, pp. 2905–17.10.1016/j.ijsolstr.2010.06.016 ↗
86. [86] D. Wu, R.S. Chen, and E.H. Han: J. Alloys Compd., 2011, vol. 509, pp. 2856–63.10.1016/j.jallcom.2010.11.141 ↗
87. [87] X. Li, F. Jiao, T. Al-samman, and S.G. Chowdhury: Scr. Mater., 2012, vol. 66, pp. 159–62.10.1016/j.scriptamat.2011.10.028 ↗
88. V.M. Miller and T.M. Pollock: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1854–64.10.1007/s11661-016-3351-8 ↗
89. J.W. Senn and S.R. Agnew: Proceedings of the Magnesium Technology 2008, TMS, M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, and E.A. Nyberg, eds., Wiley, Hoboken, New Jersey, 2008, pp. 153–58.
90. A. Farzadfar, M. Sanjari, I.-H. Jung, E. Essadiqi, and S. Yue: Proceedings of the Magnesium Technology 2012, TMS, S.N. Mathaudhu, W.H. Sillekens, N.R. Neelameggham, and N. Hort, eds., Wiley, Hoboken, New Jersey, 2012, pp. 469–73.10.1002/9781118359228.ch86 ↗
91. [91] X.S. Huang, K. Suzuki, and Y. Chino: J. Alloys Compd., 2011, vol. 509, pp. 4854–60.10.1016/j.jallcom.2011.01.189 ↗