Can Pearlite form Outside of the Hultgren Extrapolation of the Ae3 and Acm Phase Boundaries?
Source abstract
Abstract
It is usually assumed that ferrous pearlite can form only when the average austenite carbon concentration C lies between the extrapolated Ae3 (γ/α) and Acm (γ/θ) phase boundaries (the “Hultgren extrapolation”). This “mutual supersaturation” criterion for cooperative lamellar nucleation and growth is critically examined from a historical perspective and in light of recent experiments on coarse-grained hypoeutectoid steels which show pearlite formation outside the Hultgren extrapolation. This criterion, at least as interpreted in terms of the average austenite composition, is shown to be unnecessarily restrictive. The carbon fluxes evaluated from Brandt’s solution are sufficient to allow pearlite growth both inside and outside the Hultgren Extrapolation. As for the feasibility of the nucleation events leading to pearlite, the only criterion is that there are some local regions of austenite inside the Hultgren Extrapolation, even if the average austenite composition is outside.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. H.C. Sorby: J. Iron Steel Inst., 1886, vol. 1, pp. 140-147.
2. N.T. Belaiew: J. Iron Steel Inst., 1922, vol. 105, pp. 201-239.
3. N.T. Belaiew: Proc. Roy. Soc. (London), 1925, vol. A108, pp. 295-306.10.1098/rspa.1925.0076 ↗
4. J.R. Vilella, G.E. Guellich and E.C. Bain: Trans. ASM, 1936, vol. 24, pp. 225-261.
5. R.F. Mehl and W.C. Hagel: Prog. Met. Phys., 1956, vol. 6, pp. 74-134.10.1016/0502-8205(56)90005-3 ↗
6. J.W. Cahn and W.C. Hagel: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, NY, 1962, pp 131–92.
7. M. Hillert: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, NY, 1962, pp 197–237.
8. N. Ridley: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., TMS-AIME, Warrendale, PA, 1984, pp 201–36.
9. N. Ridley: Metall. Trans. A, 1984, vol. 15A, pp. 1019-1036.10.1007/BF02644694 ↗
10. B.A. MacDonald: Key Engineering Materials, 1993, vol. 84-85, pp. 62-128.10.4028/www.scientific.net/KEM.84-85.62 ↗
11. P.R. Howell: Mater. Char., 1998, vol. 40, pp. 227-260.10.1016/S1044-5803(98)00024-2 ↗
12. D.R. Lesuer, C.K. Syn, A. Goldberg, J. Wadsworth and O.D. Sherby: JOM, 1993, vol. 45 (8), pp. 40-46.10.1007/BF03222405 ↗
13. E.M. Taleff, C.K. Syn, D.R. Leseur and O.D. Sherby: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 111-118.10.1007/BF02647751 ↗
14. D.R. Lesuer, C.K. Syn, and O.D. Sherby: in Investigations and Applications of Severe Plastic Deformation, T.C. Lowe and R.Z. Valiev, eds., Kluwer, Dordrecht, 2000, pp. 357–66.10.1007/978-94-011-4062-1_46 ↗
15. K.E. Easterling: Introduction to the Physical Metallurgy of Welding. (Butterworths, London, 1983).
16. G. Krauss: Steels: Processing, Structure, and Performance, 3rd ed. (ASM, Materials Park, OH, 2005).
17. J.F. Lancaster: Metallurgy of Welding, 6 th ed. (Woodhead: Cambridge, 1999).10.1533/9781845694869 ↗
18. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed. (Chapman & Hall, London, 1992).10.1007/978-1-4899-3051-4 ↗
19. J.W. Christian: The Theory of Transformations in Metals and Alloys, 3rd ed. (Elsevier, New York, 2001).
20. L.E. Samuels: Light Microscopy of Carbon Steels, revised ed. (ASM, Materials Park, OH, 1999), p. 241.10.31399/asm.tb.lmcs.9781627082914 ↗
21. K. Honda: J. Iron Steel Inst., 1926, vol. 114, pp. 417-422.
22. R.F. Mehl: in Hardenability of Alloy Steels., ASM, Cleveland, OH, 1939, pp. 1–65.
23. A. Hultgren: Trans. ASM, 1947, vol. 39, pp. 915-1005.
24. M. Umemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanba, N. Nakajima, G. Anan and Y. Higo: ISIJ Int., 1992, vol. 32, pp. 306-315.10.2355/isijinternational.32.306 ↗
25. C. Capdevila, F.G. Caballero and C. García de Andrés: Acta Mater., 2002, vol. 50, pp. 4629-4641.10.1016/S1359-6454(02)00314-2 ↗
26. H.I. Aaronson, M.R. Plichta, G.W. Franti and K.C. Russell: Metall. Trans. A, 1978, vol. 9A, pp. 363-371.10.1007/BF02646386 ↗
27. G.P. Krielaart, M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer and S. van der Zwaag: Z. Metallkunde, 1994, vol. 85, pp. 756-765.
28. J.B. Gilmour, G.R. Purdy and J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 1455-1464.10.1007/BF02643033 ↗
29. E.B. Damm: Ph.D. Dissertation, Colorado School of Mines (Golden, CO, 2006).
30. W.T. Reynolds, Jr., and H.I. Aaronson: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., TMS-AIME, Warrendale, PA, 1984, pp 155–200.
31. H.K.D.H. Bhadeshia: Prog. Mater. Sci., 1985, vol. 29, pp. 321-386.10.1016/0079-6425(85)90004-0 ↗
32. A. Van der Ven and L. Delaey: Prog. Mater. Sci., 1996, vol. 40, pp. 181-264.10.1016/0079-6425(96)00002-3 ↗
33. C.G. de Andres, C. Capdevila, F.G. Caballero and H.K.D.H. Bhadeshia: Scripta Mater., 1998, vol. 39, pp.. 853-859.10.1016/S1359-6462(98)00271-1 ↗
34. K. Fan, F. Liu, X.N. Liu, Y.X. Zhang, G.C. Yang, Y.H. Zhou: Acta Mater., 2008, vol. 56, pp. 4309-4318.10.1016/j.actamat.2008.04.053 ↗
35. H. Chen and S. van der Zwaag: J. Mater. Sci., 2011, vol. 46, pp. 1328-1336.10.1007/s10853-010-4922-5 ↗
36. Z.Q. Liu, G. Miyamoto, Z.G. Yang and T. Furuhara: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5456-5467.10.1007/s11661-013-1885-6 ↗
37. M. M. Aranda, B. Kim, R. Rementeria, C. Capdevila, C. García de Andrés: Metall. Mater Trans. A, 2014, vol. 45A, pp. 1778-1786.10.1007/s11661-013-1996-0 ↗
38. M. Hillert: J. Appl. Phys, 1986, vol. 60, pp. 1868-1876.10.1063/1.337235 ↗
39. R.E. Hackenberg: in Phase Transformations in Steels, E. Pereloma and D.V. Edmonds, eds., Woodhead, Cambridge, 2012, vol. 1, pp. 3–55.
40. A. Hultgren: A Metallographic Study on Tungsten Steels. (Wiley: New York, 1920), p. 30.
41. H.C.H. Carpenter and J.M. Robertson: J. Iron Steel Inst., 1932, vol. 125, pp. 309-328.
42. E.S. Davenport: Trans. ASM, 1939, vol. 27, pp. 837-886.
43. F.C. Hull and R.F. Mehl: Trans. ASM, 1942, vol. 30, pp. 381-421.
44. M. Hillert: Jernkontorets Annaler, 1957, vol. 141, pp. 757-789.
45. W.H. Brandt: J. Appl. Phys., 1945, vol. 16, pp. 139-146.10.1063/1.1707565 ↗
46. W.H. Brandt: Trans. AIME, 1946, vol. 167, pp. 405-418.
47. C. Zener: Trans. AIME, 1946, vol. 167, pp. 550-595.
48. C. Zener: J. Appl. Phys., 1949, vol. 20, pp. 950-953.10.1063/1.1698258 ↗
49. F.S. Ham: J. Appl. Phys., 1959, vol. 30, pp. 1518-1525.10.1063/1.1734993 ↗
50. K. Hashiguchi and J.S. Kirkaldy, Scand. J. Metall., 1984, vol. 13, pp. 240-248.
51. M. Hillert: Acta Metall., 1971, vol. 19, pp. 769-778.10.1016/0001-6160(71)90133-7 ↗
52. K.A. Jackson, J.D. Hunt: Trans. TMS-AIME, 1966, vol. 236, pp. 1129-1142.
53. L.F. Donaghey, W.A. Tiller: Mater. Sci. Eng., 1968, vol. 3, pp. 231-239.10.1016/0025-5416(68)90015-3 ↗
54. R. Trivedi, P. Magnin, W. Kurz: Acta Metall., 1987, vol. 35, pp. 971-980.10.1016/0001-6160(87)90176-3 ↗
55. W. Kurz, R. Trivedi: Metall. Trans. A, 1991, vol. 22, pp. 3051-3057.10.1007/BF02650266 ↗
56. S.C. Gill, W. Kurz: Acta Metall. Mater., 1993, vol. 41, pp. 3563-3573.10.1016/0956-7151(93)90237-M ↗
57. B. Wei, D.M. Herlach, F. Sommer, W. Kurz: Mater. Sci. Eng., 1993, vol. A173, pp. 355-359.10.1016/0921-5093(93)90244-9 ↗
58. B. Wei, D.M. Herlach, F. Sommer, W. Kurz: Mater. Sci. Eng., 1994, vol. A181–182, pp. 1150-1155.10.1016/0921-5093(94)90821-4 ↗
59. S.C. Gill, W. Kurz: Acta Metall. Mater., 1995, vol. 43, pp. 139-151.
60. P. Gilgien, A. Zryd, W. Kurz: Acta Metall. Mater., 1995, vol. 43, pp. 3477-3487.10.1016/0956-7151(95)00039-X ↗
61. A.V. Catalina, S. Sen, D.M. Stefanescu: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 383-394.10.1007/s11661-003-0339-y ↗
62. H. Wang, F. Liu, D.M. Herlach: Journal of Crystal Growth, 2014, vol. 389, pp. 68-73.10.1016/j.jcrysgro.2013.11.080 ↗
63. W. Kurz, R. Trivedi: Acta Metall. Mater., 1990, vol. 38, pp. 1-17.10.1016/0956-7151(90)90129-5 ↗
64. W. Kurz: Advanced Engineering Materials, 2001, vol. 3, no. 7, pp. 443-452.10.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W ↗
65. D. Herlach, P. Galenko, D. Holland-Moritz: Metastable Solids from Undercooled Melts, Elsevier, Amsterdam, 2007.10.4028/0-87849-428-6.1977 ↗
66. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, R. Trivedi: Acta Mater., 2009, vol. 57, pp. 941-971.10.1016/j.actamat.2008.10.020 ↗
67. S. Akamatsu, G. Faivre, S. Moulinet: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2039-2048.10.1007/s11661-001-0016-y ↗
68. R.M. Sharp, A. Hellawell: Journal of Crystal Growth, 1969, vol. 5, pp. 155-161.10.1016/0022-0248(69)90001-3 ↗
69. R.M. Sharp, A. Hellawell: Journal of Crystal Growth, 1970, vol. 6, pp. 253-260.10.1016/0022-0248(70)90076-X ↗
70. G.F. Bolling, R.H. Richman: Metall. Trans., 1970, vol. 1, pp. 2095-2104.10.1007/BF02643420 ↗
71. F.M.A. Carpay: International Metals Reviews, 1978, vol. 23, pp. 1-18.10.1179/imtr.1978.23.1.1 ↗
72. D.D. Pearson, J.D. Verhoeven: Metall. Trans. A, 1984, vol. 15A, pp. 1037-1045.10.1007/BF02644695 ↗
73. J.D. Verhoeven, D.D. Pearson: Metall. Trans. A, 1984, vol. 15A, pp. 1047-1054.10.1007/BF02644696 ↗
74. J.W. Christian: The Theory of Transformations in Metals and Alloys, 1st ed. (Pergamon, Oxford, 1965).
75. J.C. Fisher: in Thermodynamics in Physical Metallurgy, ASM, Cleveland, OH, 1950, pp. 201–41.
76. M.A. Mangan and G.J. Shiflet: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2767-2781.10.1007/s11661-999-0114-9 ↗
77. M.E. Nicholson: Trans. AIME, 1954, vol. 200, pp. 1071-1074.
78. S.E. Offerman, L.J.G.W Van Wilderen, N.H. Van Dijk, J. Sietsma, M.T. Rekveldt, and S. Van der Zwaag: Acta Mater., 2003, vol. 51, pp. 3927–38.10.1016/S1359-6454(03)00217-9 ↗
79. H.J. Lee, G. Spanos, G.J. Shiflet and H.I. Aaronson: Acta Metall., 1988, vol. 36, pp. 1129-1140.10.1016/0001-6160(88)90166-6 ↗
80. C. García De Andrés, M.J. Bartolomé, C. Capdevila, D. San Martín, F.G. Caballero, and V. López: Mater. Char., 2001, vol. 46, pp. 389–98.10.1016/S1044-5803(01)00142-5 ↗
81. G.F. Vander Voort, A. Roósz: Metallography, 1984, vol. 17, pp. 1-17.10.1016/0026-0800(84)90002-8 ↗
82. M. Hillert: in Proceedings of an International Conference on Solid-Solid Phase transformations, H.I. Aaronson eds., TMS-AIME, Warrendale, PA, 1982, pp 789–806.
83. M. Hillert: in The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, 1969, pp 231–247.
84. S. S. Babu, H. K. D. H. Bhadeshia: J. Mater. Sci. Lett., 1995, vol. 14, pp. 314-316.10.1007/BF00592135 ↗
85. J.W. Cahn and W.G. Hagel: Acta Metall., 1963, vol. 11, pp. 561-574.10.1016/0001-6160(63)90090-7 ↗