High-strain-rate superplasticity in bulk cryomilled ultra-fine-grained 5083 Al
Source abstract
Abstract
The ductility and creep of bulk ultra-fine-grained (UFG) 5083 Al (grain size ∼440 nm) processed by gas atomization, cryomilling, and consolidation were studied in the temperature range 523 to 648 K. Also, the creep microstructure developed in the alloy was examined by means of transmission electron microscopy (TEM). The ductility as a function of strain rate exhibits a maximum that shifts to higher strain rates with increasing temperature. An analysis of the experimental data indicates that the true stress exponent is about 2, and the true activation energy is close to that anticipated for boundary diffusion in 5083 Al. These creep characteristics along with the ductility behavior of 5083 Al are a reflection of its creep behavior as a superplastic alloy and not as a solid-solution alloy. In addition, the observation of elongations of more than 300 pct at strain rates higher than 0.1 s−1 is indicative of the occurrence of high-strain-rate (HSR) superplasticity. Microstructural evidence for the occurrence of HSR superplasticity includes the retention of equiaxed grains after deformation, the observation of features associated with the occurrence of grain boundary sliding, and the formation of cavity stringers. Grain size stability during the superplastic deformation of the alloy is attributed to the presence of dispersion particles that are introduced during gas spraying and cryomilling. These particles also serve as obstacles for dislocation motion, which may account for the threshold stress estimated from the creep data of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov:Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon:Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
3. N.A. Smirnova, V.I. Levit, V.I. Pilyugin, R.I. Kuznetsov, L.S. Davydova, and V.A. Sazonova:Fiz. Met. Metalloved., 1986, vol. 68, pp. 1170–77.
4. A.P. Zhilyaev, B.K. Kim, G.V. Nurislamova, M.D. Baro, J.A. Szpunar, and T.G. Langdon:Scripta Mater., 2002, vol. 48, pp. 575–80.10.1016/S1359-6462(02)00018-0 ↗
5. S. Komura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Scripta Metall., 1998, vol. 38, pp. 1851–56.10.1016/S1359-6462(98)00099-2 ↗
6. D.H. Shin, D.Y. Hwang, Y.J. Oh, and K.T. Park:Metall. Mater. Trans. A, 2004, vol. 35A, pp. 825–37.10.1007/s11661-004-0009-8 ↗
7. R.W. Hayes, V.L. Tellkamp, and E.J. Lavernia:J. Mater. Res., 2000, vol. 15, pp. 2215–22.10.1557/JMR.2000.0318 ↗
8. A.K. Mukherjee:Ann. Rev. Mater. Sci., 1979, vol. 9, pp. 191–217.10.1146/annurev.ms.09.080179.001203 ↗
9. R.C. Gifkins:Superplastic Forming of Structural Alloys, TMS-AIME, San Diego, CA, 1980, p. 2.
10. H. Ball and M.M. Hutchinson:J. Mater. Sci., 1969, vol. 3, pp. 1–7.
11. Y. Xun and F.A. Mohamed:Phil. Mag., 2003, vol. 83A, pp. 2247–66.10.1080/1478643031000107230 ↗
12. Y. Xun and F.A. Mohamed:Acta Mater., 2004, vol. 52, pp. 4401–12.10.1016/j.actamat.2004.03.039 ↗
13. T.G. Nieh, J. Wadsworth, and O.D. Sherby:Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, p. 154.10.1017/CBO9780511525230.010 ↗
14. R.Z. Valiev, D.A. Salimonenko, P.B. Berbon, and T.G. Langdon:Scripta Mater., 1997, vol. 37, pp. 1945–50.10.1016/S1359-6462(97)00387-4 ↗
15. V.L. Tellkamp, S. Dallek, D. Cheng, and E.J. Lavernia:J. Mater. Res., 2001, vol. 16, pp. 938–44.10.1557/JMR.2001.0133 ↗
16. B.Q. Han, Z. Lee, S.R. Nutt, E.J. Lavernia, and F.A. Mohamed:Metall. Mater. Trans. A, 2003, vol. 34A, pp. 603–13.10.1007/s11661-003-0095-z ↗
17. B.Y. Chirouze, D.M. Schwartz, and J.E. Dorn:Trans. Q. ASM, 1967, vol. 60, p. 51.
18. K.L. Murthy, F.A. Mohamed, and J.E. Dorn:Acta Metall., 1972, vol. 20, pp. 1009–18.10.1016/0001-6160(72)90135-6 ↗
19. I. Roy, M. Chauhan, E.J. Lavernia, and F.A. Mohamed:Metall. Mater. Trans. A, 2006, vol. 37A, pp. 721–30.10.1007/s11661-006-0044-8 ↗
20. K. Duong and F.A. Mohamed:Metall. Mater. Trans. A, 2001, vol. 32A, pp. 103–13.10.1007/s11661-001-0106-x ↗
21. R.S. Herrick, J.R. Weertman, R. Petkovic, and M.J. Luton:Scripta Metall., 1983, vol. 22, pp. 1879–84.10.1016/S0036-9748(88)80230-8 ↗
22. V.C. Nardone and J.K. Tien:Scripta Metall., 1983, vol. 17, pp. 467–70.10.1016/0036-9748(83)90333-2 ↗
23. J.H. Schroder and E. Arzt:Scripta Metall., 1985, vol. 19, pp. 1129–34.10.1016/0036-9748(85)90022-5 ↗
24. F.A. Mohamed:Scripta Metall., 1979, vol. 13, pp. 87–89.10.1016/0036-9748(79)90041-3 ↗
25. F.A. Mohamed, M.M.I. Ahmed, and T.G. Langdon:Metall. Mater. Trans. A, 1977, vol. 8A, pp. 933–38.10.1007/BF02661575 ↗
26. P.K. Koening and F.A. Mohamed:Mater. Sci. Eng., 1985, vol. 72, pp. L9–11.10.1016/0025-5416(85)90076-X ↗
27. M.S. Mostafa and F.A. Mohamed:Metall. Trans. A, 1986, vol. 17A, pp. 365–66.10.1007/BF02643918 ↗
28. P.K. Chaudhury and F.A. Mohamed:Metall. Trans. A, 1987, vol. 18A, pp. 2105–14.10.1007/BF02647082 ↗
29. J. Fridel:Dislocations, Pergamon Press, Oxford, United Kingdom, 1964, p. 315.
30. A. Yousefiani, J.C. Earthman, and F.A. Mohamed:Acta Mater., 1998, vol. 46, pp. 3557–70.10.1016/S1359-6454(98)00030-5 ↗
31. F.A. Mohamed:Mater. Sci. Eng., 1998, vol. A245, pp. 242–56.10.1016/S0921-5093(97)00725-9 ↗
32. P.K. Chaudhury and F.A. Mohamed:Acta Metall., 1988, vol. 36, pp. 1099–110.10.1016/0001-6160(88)90163-0 ↗
33. E. Arzt and D.S. Wilkinson:Acta Metall., 1986, vol. 34, pp. 1893–98.10.1016/0001-6160(86)90247-6 ↗
34. J. Rosler and E. Arzt:Acta Metall., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
35. R.S. Mishra, T.K. Nandy, and G.W. Greenwood:Phil. Mag., 1994, vol. 69A, pp. 1097–1109.10.1080/01418619408242241 ↗
36. Y. Li, S.R. Nutt, and F.A. Mohamed:Acta Mater., 1997, vol. 45, pp. 2607–20.10.1016/S1359-6454(96)00367-9 ↗
37. I.A. Ibrahium, F.A. Mohamed, and E.J. Lavernia:J. Mater. Sci., 1991, vol. 26, pp. 1137–56.10.1007/BF00544448 ↗
38. T.G. Nieh and J. Wardsworth:J. Met., 1992, vol. 44, pp. 46–51.
39. H. Gleiter and B. Chalmers:Progr. Mater. Sci., 1972, vol. 16, pp. 1–12.10.1016/0079-6425(72)90017-5 ↗
40. F.A. Mohamed:Mater. Sci. Eng., 1979, vol. 38, pp. 73–80.10.1016/0025-5416(79)90034-X ↗
41. E.A. Brandes and G.B. Brook:Smithells Metals Reference Book, Butterworth-Heinemann Ltd., Oxford, United Kingdom, 1992, p. 23.
42. H.J. Frost and M.F. Ashby:Deformation Mechanism Maps, Pergamon Press, London, 1992.
43. H. Riedel:Fracture at High Temperatures, MRS Springer-Verlag, New York, NY, 1986.
44. R.W. Hayes, P.B. Berbon, and R.S. Mishra:Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3855–61.10.1007/s11661-004-0291-5 ↗