journal article·2010-07

Stress-State Effects on the Fracture of a Zr-Ti-Ni-Cu-Be Bulk Amorphous Alloy

R. Varadarajan, J. J. Lewandowski

Publisher page

Abstract

The effects of wide changes in stress state on the flow and fracture behavior of a single Zr-Ti-Ni-Cu-Be bulk metallic glass (BMG) of known chemistry are summarized. Both compression and tension samples were tested with superimposed hydrostatic pressures up to 1230 MPa in addition to notched tension samples tested at 0.1 MPa as well as with 490 MPa superimposed pressure. A wider range of stress states were obtained by including compression experiments conducted in pressure/shear conditions with normal stresses up to 8.7 GPa. The critical shear stress at fracture in the present BMG chemistry and sample dimensions tested is relatively unaffected by these significant changes in stress state, again indicating the normal stress/pressure dependence of flow in this particular BMG chemistry and processing conditions is vanishingly small. The present results are compared to those obtained on other metallic glasses tested under similar conditions and those that exhibit inclusion-initiated failure that demonstrate a much different dependence for similar changes in stress state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. F. Spaepan: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
2. H.A. Bruck, T. Christman, A.J. Rosakis, and W.L. Johnson: Scripta Metall. Mater., 1994, vol. 30, pp. 429–34.10.1016/0956-716X(94)90598-3 ↗
3. A.S. Argon: Acta Metall., 1979, vol. 27, pp. 47–58.10.1016/0001-6160(79)90055-5 ↗
4. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–11.10.1557/JMR.1996.0060 ↗
5. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, and A. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
6. L. Anand and W.A. Spitzig: Acta Metall., 1982, vol. 30, pp. 553–61.10.1016/0001-6160(82)90236-X ↗
7. L. Anand and W.A. Spitzig: J. Mech. Phys. Solids, 1980, vol. 28, pp. 113–28.10.1016/0022-5096(80)90017-4 ↗
8. P.W. Bridgman: Proc. Am. Acad. Arts Sci., 1911, vol. 47, pp. 347–48.10.2307/20022750 ↗
9. T. Von Karman: Z. Ver. Deut. Ing, 1911, vol. 55, pp. 1749–69.
10. J.J. Lewandowski and P. Lowhaphandu: Int. Mater. Rev., 1998, vol. 43, pp. 145–87.10.1179/imr.1998.43.4.145 ↗
11. W.A. Spitzig and O. Richmond: Acta Metall., 1984, vol. 32, pp. 457–63.10.1016/0001-6160(84)90119-6 ↗
12. F.P. Bullen, M.M. Hutchison, F. Henderson, and H.L. Wain: Phil. Mag., 1964, vol. 9, pp. 285–97.10.1080/14786436408229192 ↗
13. F.P. Bullen, H.L. Wain, M.S. Paterson, and F. Henderson: Phil. Mag., 1964, vol. 9, pp. 803–15.10.1080/14786436408211893 ↗
14. R.W. Margevicius and J.J. Lewandowski: Scripta Metall. Mater., 1991, vol. 25, pp. 2017–22.10.1016/0956-716X(91)90267-5 ↗
15. R.W. Margevicius and J.J. Lewandowski: Acta Metall., 1993, vol. 41, pp. 485–96.10.1016/0956-7151(93)90077-6 ↗
16. R.W. Margevicius, J.J. Lewandowski, and I. Locci: Scripta Metall. Mater., 1992, vol. 26, pp. 1733–36.10.1016/0956-716X(92)90543-N ↗
17. D.S. Liu and J.J. Lewandowski: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 609–15.10.1007/BF02656630 ↗
18. J.J. Lewandowski, D.S. Liu, and C. Liu: Metall. Mater. Trans. A, 1991, vol. 25A, pp. 21–26.
19. D.S. Liu, M. Manoharan, and J.J. Lewandowski: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 2409–17.10.1007/BF02666676 ↗
20. W.M. Garrison and N.R. Moody: J. Phys. Chem. Solids, 1987, vol. 48, pp. 1035–74.10.1016/0022-3697(87)90118-1 ↗
21. J.J. Lewandowski and A.W. Thompson: Metall. Trans. A, 1986, vol. 17A, pp. 1769–86.10.1007/BF02817275 ↗
22. A.W. Thompson and J.F. Knott: Metall. Trans. A, 1993, vol. 24A, pp. 523–34.10.1007/BF02656622 ↗
23. L.A. Davis and S. Kavesh: J. Mater. Sci., 1975, vol. 10, pp. 453–59.10.1007/BF00543690 ↗
24. P. Lowhaphandu, S.L. Montgomery, and J.J. Lewandowski: Scripta Mater., 1999, vol. 41, pp. 19–24.10.1016/S1359-6462(99)00128-1 ↗
25. J.J. Lewandowski and P. Lowhaphandu: Phil. Mag. A, 2002, vol. 82, pp. 3427–41.10.1080/01418610208240453 ↗
26. P. Lowhapandu, L.A. Ludrosky, S.L. Montgomery, and J.J. Lewandowski: Intermetallics, 2000, vol. 8, pp. 487–92.10.1016/S0966-9795(99)00137-5 ↗
27. K.M. Flores and R.H. Dauskardt: Acta Mater., 2001, vol. 49, pp. 2527–37.10.1016/S1359-6454(01)00125-2 ↗
28. F.P. Yuan, V. Prakash, and J.J. Lewandowski: Mech. Mater., 2009, vol. 41 (7), pp. 886–97.10.1016/j.mechmat.2009.01.025 ↗
29. F.P. Yuan, V. Prakash, and J.J. Lewandowski: J. Mater. Res., 2007, vol. 22 (2), pp. 402–11.10.1557/jmr.2007.0053 ↗
30. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
31. P. Lowhaphandu and J.J. Lewandowski: Scripta Metall. Mater., 1998, vol. 38, pp. 1811–17.10.1016/S1359-6462(98)00102-X ↗
32. A.S. Nouri, X.J. Gu, S.J. Poon, G.J. Shiflet, and J.J. Lewandowski: Phil. Mag. Lett., 2008, vol. 88, pp. 853–61.10.1080/09500830802438131 ↗
33. H.J. Leamy, H.S. Chen, and T.T. Wang: Metall. Trans., 1972, vol. 3, pp. 699–708.10.1007/BF02642754 ↗
34. C.A. Pampillo and D.E. Polk: Acta Metall., 1974, vol. 22, pp. 741–49.10.1016/0001-6160(74)90084-4 ↗
35. P.E. Donovan: Acta Metall., 1989, vol. 37, pp. 445–56.10.1016/0001-6160(89)90228-9 ↗
36. Z.F. Zhang, J. Eckert, and L. Schultz: Acta Mater., 2003, vol. 51, pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
37. W.J. Wright, R. Saha, and W.D. Nix: Mater. Trans., 2001, vol. 42, pp. 642–49.10.2320/matertrans.42.642 ↗
38. M.S. Stuke and A.S. Wronski: J. Mater. Sci., 1974, vol. 9 (6), pp. 911–19.10.1007/BF00570383 ↗
39. C.H. Robbins, and A.S. Wronski: Acta Metall., 1978, vol. 26, pp. 1061–68.10.1016/0001-6160(78)90057-3 ↗
40. High Pressure Science and Technology, A.S. Wronski and R.J. Howard, eds., Pergamon Press, Oxford, United Kingdom, 1980.
41. W.F. Wu, Y. Li, and C.A. Schuh: Phil. Mag., 2008, vol. 88, pp. 71–89.10.1080/14786430701762619 ↗
42. G. Sunny, F.P. Yuan, V. Prakash, and J. Lewandowski: Exp. Mech., 2009, vol. 49, pp. 479–90.10.1007/s11340-008-9145-1 ↗
43. G. Sunny, J. Lewandowski, and V. Prakash: J. Mater. Res., 2007, vol. 22, pp. 389–401.10.1557/jmr.2007.0042 ↗
44. J.B. Caris and J.J. Lewandowski: Acta Mater., 2010, vol. 58, pp. 1026–36.10.1016/j.actamat.2009.10.018 ↗
45. C.A. Schuh, A.S. Argon, T.G. Nieh, and J. Wadsworth: Phil. Mag., 2003, vol. 83, pp. 2585–97.10.1080/1478643031000118012 ↗
46. F. Yuan, V. Prakash, and J.J. Lewandowski: SEM IX Int. Congr. on Experimental and Applied Mechanics, Society of Experimental Mechanics, Bethel, CT, 2008, paper #336.