Fatigue Isotropy in Cross-Rolled, Hardened Isotropic-Quality Steel
Source abstract
Abstract
Deformation and forging operations often introduce microstructural orientation and, therewith, mechanical anisotropy to steel. Flattened manganese sulfide inclusions are held responsible for a great part of fatigue anisotropy. Isotropic-quality (IQ) steel maintains the mechanical isotropy of the material, even after a deformation operation. Isotropic material generally contains little S and, therewith, few manganese sulfides. Further, the IQ steels used in this investigation were Ca treated. The Ca treatment improves the shape stability of the sulfides, even during a hot-working deformation. Two commercial materials were compared for their fatigue response, a standard medium-carbon steel with 0.04 wt pct S and a low-sulfur variant that underwent IQ treatment. The two batches were cross-rolled to plates with a deformation ratio of 4.5, leading to in-plane isotropy. Tension-compression fatigue testing was performed in longitudinal and short transversal directions relative to the rolling plane. The results showed strong anisotropy of the fatigue behavior for the standard material. The performance in the short transverse direction, with the principal stress perpendicular to the flattened inclusions, was inferior. The IQ material with nearly spherical inclusions was almost perfectly isotropic, with only slightly worse fatigue response in the short transverse direction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. C. Kaynak, A. Ankara, T.J. Baker: Mater. Sci. Technol., 1996, vol. 12 (7), pp. 557–6210.1179/mst.1996.12.7.557 ↗
2. W.C. Leslie: ISS Trans., 1983, vol. 2, pp. 1–24
3. I.C. Mayes, T.J. Baker: Mater. Sci. Technol., 1986, vol. 2, pp. 133–3910.1179/mst.1986.2.2.133 ↗
4. H. Ravenshorst and M. Hejazifar: ER-502904, Volvo Powertrain Corporation, Göteborg, Sweden, unpublished research, 2000
5. J. Wilhelmsson: Volvo Powertrain Corporation, Göteborg, Sweden, unpublished research, 1999
6. P. Ölund: Adv. Mater. Processes, 2006, 164 (8), pp. 15–16
7. Buderus Edelstahl: Structural Steels—Stock List—Properties and Applications, Buderus Edelstahl, Wetzlar, Germany, 2007, pp. 1–11
8. P. Ölund: The IQ Process—The Ovako Isotropic Quality Process, Hällefors Tryckeri, Hofors, Sweden, 2006, pp. 1–7
9. M. Kage, H. Nisitani: Bull. Jpn. Soc. Mech. Eng., 1977, vol. 20, pp. 1353–5810.1299/jsme1958.20.1353 ↗
10. T. Skamletz, W. Schepp: J. Mech. Work. Technol., 1979, vol. 3, pp. 47–6210.1016/0378-3804(79)90031-7 ↗
11. F. Pellicani, F. Villette, J. Dubois: Scaninject IV: Fourth Int. Conf. on Injection Metallurgy, MEFOS, Luleå, Sweden, 1986, pp. 29:1–29:16
12. A. El-Ghazaly: Neue Hutte, 1992, vol. 37, pp. 399–404
13. M. Wahlster, H. Heimbach, K. Forch: Stahl Eisen., 1969, vol. 89, pp. 1037–44
14. A.D. Wilson: Proc. Symp. Held in Conjunction with the 1988 World Materials Congr., ASM INTERNATIONAL, Materials Park, OH, 1988, pp. 21–34.
15. A.D. Wilson: Fractography and Materials Science, Williamsburg, VA, 1981, pp. 166–8610.1520/STP33430S ↗
16. S.K. Putatunda, A.H. Christ, E.J. Cabadas, M.G. Shapona, K.N. Tatteff, M.B. Rao: J. Mater. Manuf., 1994, vol. 103, pp. 153–65
17. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier, Amsterdam, 2002, pp. 1–369
18. D. Brooksbank, K.W. Andrews: J. Iron Steel Inst., 1972, vol. 210, pp. 246–55
19. E. Doege: IFUM Do 190/49, Hannover, Germany, 1987
20. T.V. Venkatasubramanian, T.J. Baker: Met. Sci., 1982, vol. 16, pp. 543–5410.1179/030634582790427154 ↗
21. T.J. Baker, K.B. Gove, J.A. Charles: Met. Technol., 1976, vol. 3, pp. 183–9310.1179/030716976803391656 ↗
22. R. Kiessling: in Encyclopedia of Materials: Science and Technology. Bernhard Ilschner, ed., Elsevier Science, Ltd., Oxford, United Kingdom, 2001, pp. 6278–8310.1016/B0-08-043152-6/01114-1 ↗
23. G. Härkegård: Eng. Fract. Mech., 1974, vol. 6, pp. 795–80310.1016/0013-7944(74)90073-3 ↗
24. C. Temmel, B. Karlsson, N.-G. Ingesten: Metall. Mater. Trans. A, 2006. vol. 37A, pp. 2995–300710.1007/s11661-006-0181-0 ↗
25. S.B. Hosseini, C. Temmel, B. Karlsson, N.-G. Ingesten: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 982–8910.1007/s11661-007-9122-9 ↗
26. R. Kiessling, N. Lange: Non-Metallic Inclusions in Steel (Parts I-IV), 2nd ed., The Metals Society, London, 1978, pp. 114–27
27. A.S. Rao, V.V.S. Prasad, R.G. Baligidad, V.R. Rao, D.S. Sarma: Trans. Indian Inst. Met., 1999, vol. 52, pp. 139–46
28. ContinuouslyCast Steel for Bars, Tube Blanks and Forgings, Volvo Corporate Standard STD 1006, 2006, vol. 8.
29. C.-H. Leung, L.H. Van Vlack: Metall. Trans. A, 1981, vol. 12A, pp. 987–9110.1007/BF02643479 ↗
30. R.C. Weast: Physical Constants of Inorganic Compounds: CRC Handbook of Chemistry and Physics, 68th ed., CRC Press, Inc., Boca Raton, FL, 1988, pp. B-68 and B-106
31. A.D. Wilson: Characterization of Inclusions in Plate Steels and Their Influence on Mechanical Properties. Inclusions and Their Influence on Material Behavior, ASM INTERNATIONAL, Materials Park, OH, 1989, pp. 21–33
32. P. Juvonen: Effects of Non-Metallic Inclusions on Fatigue Properties of Calcium-Treated Steels, Helsinki University of Technology, Helsinki, Finland, 2004, pp. 1–102
33. A.D. Wilson: Met. Prog., 1982, vol. 121, pp. 41–46
34. K. Dalaei, C. Temmel, B. Karlsson, and N.-G. Ingesten: Volvo Powertrain Corporation, Göteborg, Sweden, unpublished research, 2007
35. P. Diersen, D. Günther, A. Walter, F. Hoffmann, E. Brinksmeier, P. Mayr: Härterei-Technische Mitteilungen, 1999, vol. 54, pp. 79–85
36. AnnualBook of ASTM Standards, ASTM International, West Conshohocken, PA, 2001, pp. 434–37.
37. AnnualBook of ASTM Standards, ASTM International, West Conshohocken, PA, 2003, pp. 1–8.
38. G.F. Vander Voort: Bearing Steels: Into 21st Century, ASTM STP 1327, J. Joseph, J. C. Hoo, and W.B. Green, eds., ASTM International, West Conshohocken, PA, 1998, pp. 13–2610.1520/STP12117S ↗
39. W.J. Dixon, A.M. Mood: J. Am. Statist. Assoc., 1948, vol. 43, pp. 108–2610.2307/2280071 ↗
40. J. Höijer: Licentiate Thesis, Chalmers University of Technology, Göteborg, Sweden, 2003.
41. H. Nisitani, M. Kage: Bull. Jpn. Soc. Mech. Eng., 1980, vol. 23, pp. 799–80610.1299/jsme1958.23.799 ↗
42. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, MA, 2004, p. 679
43. A.J. McEvily: Metal Failures—Mechanisms, Analysis, Prevention, John Wiley & Sons, Inc., New York, NY, 2002, pp. 198–200