On the behavior of microstructures with multiple length scales
Source abstract
Abstract
The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 µm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. H. Gleiter:Prog. Mater. Sci., 1989, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
2. X.Z. Liao, F. Zhou, E.J. Lavernia, S.G. Srinivasan, M.I. Baskes, D.W. He, and Y.T. Zhu:Appl. Phys. Lett., 2003, vol. 83, pp. 632–34.10.1063/1.1594836 ↗
3. X.Z. Liao, J.Y. Huang, Y.T. Zhu, F. Zhou, and E.J. Lavernia:Philos. Mag., 2003, vol. 83, pp. 3065–75.10.1080/1478643031000152799 ↗
4. X.Z. Liao, F. Zhou, E.J. Lavernia, D.W. He, and Y.T. Zhu:Appl. Phys. Lett., 2003, vol. 83, pp. 5062–64.10.1063/1.1633975 ↗
5. J.H. He, K.H. Chung, X.Z. Liao, Y.T. Zhu, and E.J. Lavernia:Metall. Mater. Trans. A, 2003, vol. 34, pp. 707–12.10.1007/s11661-003-0106-0 ↗
6. D. Wolf, V. Yamakov, S.R. Phillpot, A. Mukherjee, and H. Gleiter:Acta Mater., 2005, vol. 53, pp. 1–40.10.1016/j.actamat.2004.08.045 ↗
7. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter:Nat. Mater., 2002, vol. 1, pp. 45–48.10.1038/nmat700 ↗
8. V. Yamakov, D. Wolf, M. Salazar, S.R. Phillpot, and H. Gleiter:Acta Mater., 2001, vol. 49, pp. 2713–22.10.1016/S1359-6454(01)00167-7 ↗
9. V. Yamakov, D. Wolf, S.R. Phillpot, and H. Gleiter:Acta Mater., 2002, vol. 50, pp. 5005–20.10.1016/S1359-6454(02)00318-X ↗
10. V. Yamakov, D. Wolf, S.R. Phillpot, and H. Gleiter:Acta Mater., 2003, vol. 51, pp. 4135–47.10.1016/S1359-6454(03)00232-5 ↗
11. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter:Philos. Mag. Lett., 2003, vol. 83, pp. 385–93.10.1080/09500830031000120891 ↗
12. C.C. Koch, D.G. Morris, K. Lu, and A. Inoue:MRS Bull., 1999, vol. 24, pp. 54–58.10.1557/S0883769400051551 ↗
13. K.M. Youssef, R.O. Scattergood, K.L. Murty, and C.C. Koch:Appl. Phys. Lett., 2004, vol. 85, pp. 929–31.10.1063/1.1779342 ↗
14. M. Legros, B.R. Elliott, M.N. Rittner, J.R. Weertman, and K.J. Hemker:Philos. Mag. A, 2000, vol. 80, pp. 1017–26.10.1080/014186100250679 ↗
15. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe:J. Mater. Res., 2002, vol. 17, pp. 5–8.10.1557/JMR.2002.0002 ↗
16. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma:Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
17. B.Q. Han, Z. Lee, D. Witkin, S. Nutt, and E.J. Lavernia:Metall. Mater. Trans. A, 2005, vol. 36A, pp. 957–65.10.1007/s11661-005-0289-7 ↗
18. V.L. Tellkamp, A. Melmed, and E.J. Lavernia:Metall. Mater. Trans. A, 2001, vol. 32, pp. 2335–43.10.1007/s11661-001-0207-6 ↗
19. Z. Lee, R. Rodriguez, R.W. Hayes, E.J. Lavernia, and S.R. Nutt:Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1473–81.10.1007/s11661-003-0259-x ↗
20. Y.S. Park, K.H. Chung, N.J. Kim, and E.J. Lavernia:Mater. Sci. Eng. A, 2004, vol. 374, pp. 211–16.10.1016/j.msea.2004.02.013 ↗
21. F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia:Acta Mater., 2003, vol. 51, pp. 2777–91.10.1016/S1359-6454(03)00083-1 ↗
22. J. Eckert, J.C. Holzer, C.E. Krill, and W.L. Johnson:J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
23. T.R. Malow and C.C. Koch:Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
24. F. Zhou, J. Lee, and E.J. Lavernia:Scripta Mater., 2001, vol. 44, pp. 2013–17.10.1016/S1359-6462(01)00826-0 ↗
25. D. Witkin, Z. Lee, R. Rodriguez, S. Nutt, and E. Lavernia:Scripta Mater., 2003, vol. 49, pp. 297–302.10.1016/S1359-6462(03)00283-5 ↗
26. J.S. Benjamin and T.E. Volin:Metall. Trans., 1974, vol. 5, pp. 1929–34.10.1007/BF02644161 ↗
27. P.S. Gilman and J.S. Benjamin:Annu. Rev. Mater. Sci., 1983, vol. 13, pp. 279–300.10.1146/annurev.ms.13.080183.001431 ↗
28. D.R. Maurice and T.H. Courtney:Metall. Trans. A, 1990, vol. 21, pp. 289–303.10.1007/BF02782409 ↗
29. J.S. Benjamin:Mater. Sci. Forum, 1992, vol. 88–90, pp. 1–18.10.4028/www.scientific.net/MSF.88-90.1 ↗
30. H.P. Klug and L.E. Alexander:X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., John Wiley and Sons, New York, NY, 1974.
31. Z. Zhang, F. Zhou, and E.J. Lavernia:Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1349–55.10.1007/s11661-003-0246-2 ↗
32. F. Zhou, D. Witkin, S.R. Nutt, and E.J. Lavernia:Mater. Sci. Eng. A, 2004, vol. 375–77, pp. 917–21.10.1016/j.msea.2003.10.235 ↗
33. F. Zhou, R. Rodriguez, and E.J. Lavernia: inMetastable, Mechanically Alloyed and Nanocrystalline Materials, 2002, vol. 386–88, pp. 409–14.
34. F. Zhou, S.R. Nutt, C.C. Bampton, and E.J. Lavernia:Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1985–92.10.1007/s11661-003-0163-4 ↗
35. J.B. Fogagnolo, F. Velasco, M.H. Robert, and J.M. Torralba:Mater. Sci. Eng., A, 2003, vol. 342, pp. 131–43.10.1016/S0921-5093(02)00246-0 ↗
36. P.S. Gilman and W.D. Nix:Metall. Trans. A, 1981, vol. 12, pp. 813–24.10.1007/BF02648346 ↗
37. H.-J. Fecht:Nanostruct. Mater., 1995, vol. 6, pp. 33–42.10.1016/0965-9773(95)00027-5 ↗
38. X. Zhang, H. Wang, J. Narayan, and C.C. Koch:Acta Mater., 2001, vol. 49, pp. 1319–26.10.1016/S1359-6454(01)00051-9 ↗
39. F.J. Humphreys and M. Hatherly:Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004.
40. M. Jin, A.M. Minor, E.A. Stach, and J. Morris:Acta Mater., 2004, vol. 52, pp. 5381–87.10.1016/j.actamat.2004.07.044 ↗
41. M.E. Kassner and M.E. McMahon:Metall. Trans. A, 1987, vol. 18, pp. 835–46.10.1007/BF02646925 ↗
42. A.J. Haslam, S.R. Phillpot, D. Wolf, D. Moldovan, and H. Gleiter:Mater. Sci. Eng., A, 2001, vol. 318, pp. 293–312.10.1016/S0921-5093(01)01266-7 ↗
43. A.J. Haslam, D. Moldovan, V. Yamakov, D. Wolf, S.R. Phillpot, and H. Gleiter:Acta Mater., 2003, vol. 51, pp. 2097–112.10.1016/S1359-6454(03)00011-9 ↗
44. J. Ye, Z. Lee, B. Ahn, J. He, S.R. Nutt, and J.M. Schoenung:Evolution of Microstructure for the B4Cp/Al System during Cryomilling, submitted, 2005.
45. S. Cheng, J.A. Spencer, and W.W. Milligan:Acta Mater., 2003, vol. 51, pp. 4505–18.10.1016/S1359-6454(03)00286-6 ↗
46. D. Oleszak and P.H. Shingu:J. Appl. Phys., 1996, vol. 79, pp. 2975–80.10.1063/1.361294 ↗