journal article·2007-01

Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels

T.D. ANDERSON, J.N. DuPONT, M.J. PERRICONE, A.R. MARDER

Publisher page

Abstract

The good corrosion resistance of superaustenitic stainless steel (SASS) alloys has been shown to be a direct consequence of high concentrations of Mo, which can have a significant effect on the microstructural development of welds in these alloys. In this research, the microstructural development of welds in the Fe-Ni-Cr-Mo system was analyzed over a wide variety of Cr/Ni ratios and Mo contents. The system was first simulated by construction of multicomponent phase diagrams using the CALPHAD technique. Data from vertical sections of these diagrams are presented over a wide compositional range to produce diagrams that can be used as a guide to understand the influence of composition on microstructural development. A large number of experimental alloys were then prepared via arc-button melting for comparison with the diagrams. Each alloy was characterized using various microscopy techniques. The expected δ-ferrite and γ-austenite phases were accompanied by martensite at low Cr/Ni ratios and by σ phase at high Mo contents. A total of 20 possible phase transformation sequences are proposed, resulting in various amounts and morphologies of the γ, δ, σ, and martensite phases. The results were used to construct a map of expected phase transformation sequence and resultant microstructure as a function of composition. The results of this work provide a working guideline for future base metal and filler metal development of this class of materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A. Garner: Corrosion, 1979, vol. 35, pp. 108-1410.5006/0010-9312-35.3.108 ↗
2. S.W. Banovic, J.N. DuPont, and A.R. Marder: Sci. Technol. Welding Joining (UK), 2002, vol. 7, pp. 374-8310.1179/136217102225006804 ↗
3. J.N. DuPont, L.E. Friedersdorf, A.R. Marder, and S.W. Banovic: Lehigh University ATLSS Report No. 01-03, Lehigh University, Bethlehem, PA, 2001
4. J.A. Brooks, and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16–4410.1179/imr.1991.36.1.16 ↗
5. S.W. Banovic, J.N. DuPont, and A.R. Marder: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 1171-7610.1007/s11663-001-0104-9 ↗
6. S.W. Banovic, J.N. DuPont, and A.R. Marder: Welding J., 2003, vol. 82, pp. 125-35
7. J.W. Elmer, S.M. Allen, and T.W. Eagar: Metall. Trans. A, 1989, vol. 20A, pp. 2117-3110.1007/BF02650298 ↗
8. J.W. Elmer, S.M. Allen, and T.W. Eagar: Recent Trends in Welding Science and Technology, Gatlinburg, TN, May 14–18, 1989, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 165-70
9. M.J. Perricone, T.D. Anderson, J.N. DuPont, and C.V. Robino: MS and T, Cincinnati, OH, 2006
10. B. Sundman: Thermo-alc, S-100 44[[N]], KTH, Stockholm, 2001
11. N. Saunders: Fe-Data Thermodynamic Database, [[3.0]], Thermotech, Ltd., Guildford, United Kingdom, 2001.
12. A.L. Schaeffler: Met. Progr., 1949, vol. 56, p. 680
13. T. Hahn: International Tables for Crystallography, 4th ed., Springer US, Berlin, 1996
14. T.D. Anderson, M.J. Perricone, J.N. DuPont, and A.R. Marder: unpublished research, 2006
15. J.A. Brooks and M.I. Baskes: Recent Trends in Welding Science and Technology, Gatlinburg, TN, May 14–18, 1989, pp. 153-58
16. E.S. Rowland and S.R. Lyle: Trans. ASM, 1946, pp. 27-4710.1080/00119253.1946.10742497 ↗
17. M.J. Perricone, C.V. Robino, T.D. Anderson, and J.N. DuPont: Sandia National Laboratories, Albuquerque, NM, unpublished research, 2006
18. M.J. Perricone, and J.N. DuPont: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1267-8010.1007/s11661-006-1078-7 ↗
19. G.V. Kurdjumov, and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325-43.10.1007/BF01397346 ↗