journal article·2014-12Open access

Relationship Between Microstructure, Strength, and Fracture in an Al-Zn-Mg Electron Beam Weld: Part I: Microstructure Characterization

Quentin Puydt, Sylvain Flouriot, Sylvain Ringeval, Frédéric De Geuser, Guillaume Parry, Alexis Deschamps

Abstract

This work presents a detailed, multiscale, spatially resolved study of the microstructure of an electron beam butt weld of the EN-AW 7020 (Al-Zn-Mg) alloy. Using a combination of optical, scanning and transmission electron microscopy, differential scanning calorimetry, and small-angle X-ray scattering, the distribution of phases in the different areas of the heat-affected zone and of the fusion zone is quantitatively characterized, for two different aging states: naturally aged after welding and artificially aged at 423 K (150 A degrees C). The heat-affected zone consists of regions experiencing different levels of precipitate dissolution and coarsening during welding as well as new precipitation during post-welding heat treatment (PWHT). The microstructure of the fusion zone is typical from a fast solidification process, with a strong solute segregation in the interdendritic zones. The precipitate distribution after PWHT follows this solute distribution, and the resulting hardness is much lower than the relatively homogeneous value in the base metal and the heat-affected zone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. L.M. Volpone and S. Mueller: Weld. Int., 2008, vol. 22, p. 597.10.1080/09507110802411518 ↗
2. P. L. Threadgill, A. J. Leonard, H. R. Shercliff, and P. J. Withers: Int. Mater. Rev., 2009, vol. 54, pp. 49–93.10.1179/174328009X411136 ↗
3. G. Mathers: The Welding of Aluminium and Its Alloys, Woodhead Publishing, Cambridge, UK, 2002.10.1533/9781855737631 ↗
4. A. Simar, Y. Brechet, B. de Meester, A. Denquin, C. Gallais, and T. Pardoen: Prog. Mater. Sci., 2012, vol. 57, pp. 95–183.10.1016/j.pmatsci.2011.05.003 ↗
5. T. Ma and G. den Ouden: Mater. Sci. Eng. A, 1999, vol. A266, pp. 198–204.10.1016/S0921-5093(99)00020-9 ↗
6. G. D. J. Ram, T. K. Mitra, V. Shankar, and S. Sundaresan: J. Mater. Process. Technol., 2003, vol. 142, pp. 174–81.10.1016/S0924-0136(03)00574-0 ↗
7. A. Deschamps, G. Texier, S. Ringeval, and L. Delfaut-Durut: Mater. Sci. Eng. A, 2009, vol. A501, pp. 133–39.10.1016/j.msea.2008.09.067 ↗
8. F. Matsuda: Trans. JWRI, 1982, vol. 11, p. 87.10.1007/BF00165596 ↗
9. Donald E. Powers: Weld. J., 2011, vol. 90, pp. 30–34.
10. Z. Sun and R. Karppi: J. Mater. Process. Technol., 1996, vol. 59, pp. 257–67.10.1016/0924-0136(95)02150-7 ↗
11. P. Wanjara and M. Brochu: Vacuum, 2010, vol. 85, pp. 268–82.10.1016/j.vacuum.2010.06.007 ↗
12. Biju S. Nair, S. Rakesh, G. Phanikumar, K. Prasad Rao, and P. P. Sinha: Mater. Des., 2010, vol. 31, pp. 4943–50.10.1016/j.matdes.2010.05.017 ↗
13. D. Maisonnette, M. Suery, D. Nelias, P. Chaudet, and T. Epicier: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2718–24.10.1016/j.msea.2010.12.011 ↗
14. G. Cam and M. Kocak: J. Mater. Sci., 2007, vol. 42, pp. 7154–61.10.1007/s10853-007-1604-z ↗
15. A Deschamps, S Ringeval, G Texier, and L Delfaut-Durut: Mater. Sci. Eng. A, 2009, vol. 517, pp. 361–368.10.1016/j.msea.2009.03.088 ↗
16. J. Lendvai: Mater. Sci. Forum, 1996, vol. 217-222, pp. 43–56.10.4028/www.scientific.net/MSF.217-222.43 ↗
17. G. Waterloo, V. Hansen, J. Gjonnes, and S. R. Skjervold: Mater. Sci. Eng. A, 2001, vol. 303, pp. 226–233.10.1016/S0921-5093(00)01883-9 ↗
18. L. K Berg, J. Gjønnes, V. Hansen, X. Z Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, and L. R Wallenberg: Acta Mater., 2001, vol. 49, pp. 3443–51.10.1016/S1359-6454(01)00251-8 ↗
19. Z. H Li, B. Q Xiong, Y. G Zhang, B. H Zhu, F. Wang, and H. W Liu: Mater. Charact., 2008, vol. 59, pp. 278–282.10.1016/j.matchar.2007.01.006 ↗
20. G. Fribourg, Y. Bréchet, Deschamps, A., and A. Simar: Acta Mater., 2011, vol. 59, pp. 3621–3635.10.1016/j.actamat.2011.02.035 ↗
21. G.M. Ludka and D.E. Laughlin: Metall. Trans. A, 1982, vol. 13A, p. 411.10.1007/BF02643350 ↗
22. T. Pardoen, D. Dumont, A. Deschamps, and Y. Brechet: J. Mech. Phys. Solids, 2003, vol. 51, pp. 637–665.10.1016/S0022-5096(02)00102-3 ↗
23. Q. Puydt, S. Flouriot, S. Ringeval, F. De Geuser, R. Estevez, G. Parry, and A. Deschamps: Metall. Mater. Trans. A, 2014, DOI:10.1007/s11661-014-2567-8.10.1007/s11661-014-2567-8 ↗
24. O.R. Myhr and O. Grong: Acta Metall. Mater., 1991, vol. 39, pp. 2693–2702.10.1016/0956-7151(91)90085-F ↗
25. O.R. Myhr and O. Grong: Acta Metall. Mater., 1991, vol. 39, pp. 2703–2708.10.1016/0956-7151(91)90086-G ↗
26. O.R Myhr, O. Grong, H.G Fjaer, and C.D Marioara: Acta Mater., 2004, vol. 52, pp. 4997–5008.10.1016/j.actamat.2004.07.002 ↗
27. B.I. Bjorneklett, O. Grong, O.R. Myhr, and A.O. Kluken: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2667–77.10.1007/s11661-999-0307-2 ↗
28. M. Nicolas and A. Deschamps: Acta Mater., 2003, vol. 51, pp. 6077–6094.10.1016/S1359-6454(03)00429-4 ↗
29. M. Nicolas and A. Deschamps: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1437–1448.10.1007/s11661-004-0252-z ↗
30. S. C. Wang, F. Lefebvre, J. L. Yan, I. Sinclair, and M. J. Starink: Mater. Sci. Eng. A, 2006, vol. 431, pp. 123–136.10.1016/j.msea.2006.05.120 ↗
31. Reinhold Braun: Mater. Sci. Eng. A, 2006, vol. 426, pp. 250–262.10.1016/j.msea.2006.04.033 ↗
32. D. Fabregue, A. Deschamps, and M. Suery: Mater. Sci. Technol., 2005, vol. 21, pp. 1329–36.10.1179/174328405X58896 ↗
33. Y. E. Wu and Y. T. Wang: J. Mater. Eng. Perform., 2010, vol. 19, pp. 1362–69.10.1007/s11665-010-9638-9 ↗
34. F. De Geuser and A. Deschamps: C R Phys., 2012, vol. 13, pp. 246–56.10.1016/j.crhy.2011.12.008 ↗
35. A. Deschamps and F. De Geuser: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 77–86.10.1007/s11661-012-1435-7 ↗
36. F. Zhang, J. Ilavsky, G.G. Long, J.P.G. Quintana, A.J. Allen, and P.R. Jemian: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1151–58.10.1007/s11661-009-9950-x ↗
37. Alexis Deschamps and Frédéric De Geuser: J. Appl. Crystallogr., 2011, vol. 44, pp. 343–52.10.1107/S0021889811003049 ↗
38. M. Dumont, W. Lefebvre, B. Doisneau-Cottignies, and A. Deschamps: Acta Mater., 2005, vol. 53, pp. 2881–92.10.1016/j.actamat.2005.03.004 ↗
39. P. Staron, W. V. Vaidya, and M. Kocak: Mater. Sci. Eng. A, 2009, vol. 525, pp. 192–99.10.1016/j.msea.2009.06.058 ↗
40. M. Dumont, A. Steuwer, A. Deschamps, M. Peel, and P. J Withers: Acta Mater., 2006, vol. 54, pp. 4793–4801.10.1016/j.actamat.2006.06.015 ↗
41. C. Genevois, A. Deschamps, A. Denquin, and B. Doisneau cottignies: Acta Mater., 2005, vol. 53, pp. 2447–58.10.1016/j.actamat.2005.02.007 ↗
42. A. Steuwer, M. Dumont, J. Altenkirch, S. Birosca, A. Deschamps, P.B Prangnell, and P.J Withers: Acta Mater., 2011, vol. 59, p.3002.10.1016/j.actamat.2011.01.040 ↗
43. A. Simar, Y. Brechet, B. de Meester, A. Denquin, and T. Paerdoen: Acta Mater., 2007, vol. 55, pp. 6133–43.10.1016/j.actamat.2007.07.012 ↗
44. A. Deschamps, C. Sigli, T. Mourey, F. de Geuser, W. Lefebvre, and B. Davo: Acta Mater., 2012, vol. 60, pp. 1917–28.10.1016/j.actamat.2012.01.010 ↗
45. C. A. Gandin, Y. Brechet, M. Rappaz, G. Canova, M. Ashby, and H. Shercliff: Acta Mater., 2002, vol. 50, pp. 901–27.10.1016/S1359-6454(01)00376-7 ↗
46. Q. Puydt: Ph.D. Thesis, University of Grenoble, France, 2012.