Deformation Characteristics and Recrystallization Response of a 9310 Steel Alloy
Source abstract
Abstract
The flow behavior and recrystallization response of a 9310 steel alloy deformed in the ferrite temperature range were studied in this work. Samples were compressed under various conditions of strain (0.6, 0.8 and multi-axial), strain rate (10−4 seconds−1 to 10−1 seconds−1) and temperature [811 K to 1033 K (538 °C to 760 °C)] using a Gleeble thermo-mechanical simulator. Deformation was characterized by both qualitative and quantitative means, using standard microscopy, electron backscatter diffraction (EBSD) analysis and flow stress modeling. The results indicate that deformation is primarily accommodated through dynamic recovery in sub-grain formation. EBSD analysis shows a continuous increase in sub-grain boundary misorientation with increasing strain, ultimately producing recrystallized grains from the sub-grains at high strains. This suggests that a sub-grain rotation recrystallization mechanism predominates in this temperature range. Analyses of the results reveal a decreasing mean dynamically recrystallized grain size with increasing Zener-Hollomon parameter, and an increasing recrystallized fraction with increasing strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. E. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
2. N. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
3. P. Schaaf, G. Rixecker, E. Yang, C.N.J. Wagner, and U. Gonser: Hyperfine Interact., 1994, vol. 94, no. 1, pp. 2239–44.10.1007/BF02063769 ↗
4. Y. Yoshizawa, S. Oguma, and K. Yamauchi: J. Appl. Phys., 1988, vol. 64, pp. 6044–46.10.1063/1.342149 ↗
5. Y. Fukuda, K. Oh-ishi, Z. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, no. 6, pp. 1359–68.10.1016/S1359-6454(01)00441-4 ↗
6. W. Chang, G. Skandan, S.C. Danforth, and B.H. Kear: Nanostruct. Mater., 1994, vol. 4, no. 5, pp. 507–20.10.1016/0965-9773(94)90058-2 ↗
7. D.S. Lashmore and M.P. Dariel: J. Electrochem. Soc., 1988, vol. 135, no. 5, pp. 1218–21.10.1149/1.2095930 ↗
8. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, no. 7, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
9. D.H. Shin, I. Kim, J. Kim, and K. Park: Acta Mater., 2001, vol. 49, pp. 1285–92.10.1016/S1359-6454(01)00010-6 ↗
10. R.L. Bickerdike, D. Clark, and J.N. Easterbrook: Int. J. Rapid Solidif., 1985, vol. 1, no. 4, pp. 305–25.
11. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, no. 2, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
12. J. Su and T.W. Nelson: Prog. Mater. Sci. Res., 2008, chap. 3, pp. 105–29.
13. N.A. Smirnova, V.I. Levit, and V.I. Pilyugin: Fiz. Met. Metalloved., 1986, vol. 61, pp. 1170–77.
14. A.P. Zhilyaev, G.V. Nurislamova, B.-K. Kim, M.D. Baró, J.A. Szpunar, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 753–65.10.1016/S1359-6454(02)00466-4 ↗
15. G.A. Salishchev, O.R. Valiakhmetov, and R.M. Galeyev: J. Mater. Sci., 1993, vol. 28, pp. 2898–2902.10.1007/BF00354692 ↗
16. O. Sitdikov, T. Sakai, A. Goloborodko, H. Miura, and R. Kaibyshev: Mater. Trans., 2004, vol. 45, pp. 2232–38.10.2320/matertrans.45.2232 ↗
17. A. Abdollah-Zadeh and B. Eghdali: Mater. Sci. Eng., 2007, vol. 457A, pp. 219–25.10.1016/j.msea.2006.12.022 ↗
18. M. Richert, Q. Liu, and N. Hansen: Mater. Sci. Eng., 1999, vol. 260A, pp. 275–83.10.1016/S0921-5093(98)00988-5 ↗
19. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
20. A. Belyakov, T. Sakai, H. Miura, and K. Tsuzaki: Philos. Mag., 2001, vol. 81A, no. 11, pp. 2629–43.10.1080/01418610108216659 ↗
21. F.H. Samuel, S. Yue, J.J. Jonas, and K.R. Barnes: ISIJ Int., 1990, vol. 30, no. 3, pp. 216–25.10.2355/isijinternational.30.216 ↗
22. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Mater. Sci. Forum, 1998, vols. 284–286, pp. 63–72.10.4028/www.scientific.net/MSF.284-286.63 ↗
23. R. Priestner, Y.M. Al-Horr, and A.K. Ibraheem: Mater. Sci. Technol., 2002, vol. 18, no. 9, pp. 973–80.10.1179/026708302225004900 ↗
24. L.J. Cuddy and J.C. Raley: Metall. Trans., 1975, vol. 6A, pp. 1310–11.10.1007/BF02658546 ↗
25. P.A. Manohar, M. Ferry, and T. Chandra: Enc. Mater. Sci. Technol., 2001, pp. 3019–24.10.1016/B0-08-043152-6/00539-8 ↗
26. G. Hirth and J. Tullis: J. Struct. Geol., 1992, vol. 14, no. 2, pp. 145–59.10.1016/0191-8141(92)90053-Y ↗
27. M. Guillope and J.P. Poirier: J. Geophys. Res., 1979, vol. 84B, pp. 5557–67.10.1029/JB084iB10p05557 ↗
28. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–99.10.1016/S1359-6454(03)00078-8 ↗
29. C.W. Passchier and R. Trouw: Microtectonics, vol. 1, 2nd ed., Springer, New York, 2005.
30. G.F. Vander Voort: Atlas of Time-Temperature Diagrams for Irons and Steels, ASM International, Materials Park, OH, 1991, p. 466.
31. M. Atkins: Atlas of CCT Diagrams for Engineering Steels, ASM, Metals Park, OH, 1980.
32. I. Tamura: Tetsu to Hagane, 1988, vol. 74, pp. 18–35.10.2355/tetsutohagane1955.74.1_18 ↗
33. T. Maitland and S. Sitzman: Scanning Microscopy for Nanotechnology: Techniques and Applications, Springer, New York, 2007, pp. 41–75.
34. M. Winning and A.D. Rollett: Acta Mater., 2005, vol. 53, no. 10, pp. 2901–07.10.1016/j.actamat.2005.03.005 ↗
35. S. Matsuoka, K. Sakata, O. Furukimi, and T. Obara: Tetsu to Hagane, 1999, vol. 85, no. 6, pp. 471–78.10.2355/tetsutohagane1955.85.6_471 ↗
36. J.J. Jonas, C.M. Sellars, and W.J. Tegart: Metall. Rev., 1969, vol. 14, pp. 1–24.10.1179/mtlr.1969.14.1.1 ↗
37. A. Liu, Y. Li, C. Wang, X. Liu, G. Xu, and Z. Liu: Iron Steel, 2009, vol. 44, no. 10, pp. 82–86.
38. H.J. McQueen and N.D. Ryan: Mater. Sci. Eng., 2002, vol. 322A, pp. 43–63.10.1016/S0921-5093(01)01117-0 ↗
39. F.S. Buffington, K. Hirano, and M. Cohen: Acta Metall., 1961, vol. 9, no. 5, pp. 434–39.10.1016/0001-6160(61)90137-7 ↗