journal article·2002-07

Dissolution kinetics of NbC particles in the heat-affected zone of type 347 austenitic stainless steel

Leijun Li, Robert W. Messler

Publisher page

Abstract

Dissolution kinetics of NbC particles in the heat-affected zone (HAZ) of Type 347 austenitic stainless steel were experimentally studied by a rapid cooling method. Coupons with 1.5-mm thickness were water quenched on a GLEEBLE thermomechanical simulator at various instances during the heating portion of a welding thermal cycle. Particle dissolution kinetics data were obtained by statistical analysis of digital images of resulting microstructure. For most of the test alloys, a good correlation exists between the dissolution kinetics and the susceptibility to cracking in the HAZ. The faster the Nb-carbide particles dissolve, the more resistant the alloy is to constitutional liquation cracking. The rate at which particles dissolve seems to be affected by their stoichiometry. If Nb:C ratios in bulk alloys are closer to the ideal stoichiometry of 7.7, NbC particles formed in the alloy are more likely to be stable and, hence, slower to dissolve.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. K.E. Easterling: Introduction to the Physical Metallurgy of Welding, 2nd ed., Butterworth-Heinemann, London, 1992, pp. 207–09.
2. J.J. Pepe and W.F. Savage: Welding J., 1967, vol. 46 (9), pp. 411s-422s.
3. J.J. Pepe and W.F. Savage: Welding J., 1970, vol. 49 (12), pp. 545s-553s.
4. B. Weiss, G.E. Grotke, and R. Stickler: Welding J., 1970, vol. 49 (10), pp. 471s-487s.
5. J.L. Robinson and M.H. Scott: Phil. Trans. R. Soc. London, 1980, vol. A295, pp. 105–17.
6. T. Ogawa and E. Tsunetomi: Welding J., 1982, vol. 61 (3), pp. 82s-93s.
7. R.D. Thomas, Jr.: Welding J., 1984, vol. 63 (12), pp. 355s-368s.
8. K. Sampath, R.S. Green, and R.E. Swanson: Proc. 3rd Int. SAMPE Metals and Metals Processing Conf., 1992, Toronto, Canada, pp. M491–M503.
9. R.W., Messler, Jr. and L. Li: Int. J. Sci. Technol. Welding Joining, 1997, vol. 2 (2), pp. 43–52.10.1179/stw.1997.2.2.43 ↗
10. R.D. Thomas, Jr. and R.W., Messler, Jr.: WRC Bulletin 421, WRC, New York, NY, 1997.
11. B. Radhakrishnan and R.G. Thompson: Metall. Trans. A, 1992, vol. 23A (6), pp. 1783–99.10.1007/BF02804371 ↗
12. M.F. Ashby and K.E. Easterling: Acta Metall., 1982, vol. 30 (11), pp. 1969–78.10.1016/0001-6160(82)90100-6 ↗
13. M.F. Ashby and K.E. Easterling: Acta Metall., 1984, vol. 32 (11), pp. 1935–48.10.1016/0001-6160(84)90175-5 ↗
14. J. Strid and K.E. Easterling: Acta Metall., 1985, vol. 33 (11), pp. 2057–74.10.1016/0001-6160(85)90129-4 ↗
15. S. Suzuki, G.C. Weatherly, and D.C. Houghton: Acta Metall., 1987, vol. 35 (2), pp. 341–52.10.1016/0001-6160(87)90242-2 ↗
16. A.D. Romig, Jr., J.C. Lippold, and M.J. Cieslak: Metall. Trans. A, 1988, vol. 19A, pp. 35–50.
17. A. Benghalem, J. Bouzon, and J.M. Vergnaud: Eur. Polym. J., 1994, vol. 31 (4), pp. 327–33.10.1016/0014-3057(94)00180-4 ↗
18. H.B. Aaron and G.R. Kotler: Metall. Trans., 1971, vol. 2, pp. 393–408.10.1007/BF02663326 ↗
19. D.J. Ball: Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1983.
20. S. Hertzman, P.J. Ferreira, and B. Brolund: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 277–85.10.1007/s11661-997-0130-6 ↗
21. R.W. Cahn and P. Haasen: Physical Metallurgy, North-Holland Physics Publishing, Amsterdam, 1983, pp. 989–90.
22. D.B. Williams, A.R. Pelton, and R. Gronsky: Images of Materials, Oxford University Press, New York, NY, 1991, pp. 340–47.
23. J.F. Brown, W.D. Clark, and A. Parker: Metallurgia, 1957, vol. 48 (11), pp. 215–23.
24. L. Li and R.W. Messler, Jr.: Int. Conf. on Joining of Advanced and Specialty Materials II, Cincinnati, OH, Nov. 1–4, 1999.
25. R.H. Dorcmus: Rates of Phase Transformations, Academic Press, Orlando, FL, 1985.
26. R. Chang: Essential Chemistry, McGraw-Hill Companies, New York, NY, 1996.
27. T.H. Johansen, N. Christensen, and B. Augland: Trans. TMS-AIME, 1967, vol. 239 (10), pp. 1651–54.
28. S.R. Keown and F.B. Pickering: Niobium, Proc. Int. Symp. Niobium ’81, San Francisco, CA, Nov. 8–11, 1981, H. Stuart, ed., TMS, Warrendale, PA, 1981.
29. S.R. Keown and F.B. Pickering: in Creep Strength in Steel and High-Temperature Alloys, The Metals Society, London, 1977, pp. 134–43.
30. R.W.K. Honeycombe and H.K.D.H. Bhadeshia: Steels: Microstructure and Properties, 2nd ed., Edward Arnold, London, 1996, pp. 259–62.
31. H.I. Shick: Thermodynamics of Certain Refractory Compounds, Academic Press, New York, NY, 1966.
32. P. Duwez and F. Odell: J. Electrochem. Soc., 1950, vol. 97 (10), pp. 299–304.10.1149/1.2777885 ↗