journal article·2014-09Open access

Microstructural Evolution of the 55 Wt Pct Al-Zn Coating During Press Hardening

Chang Wook Lee, Bruno Charles De Cooman

Abstract

Press hardening is increasingly being used to produce ultra-high strength steel parts for passenger cars. Al-Si, Zn, and Zn-alloy coatings have been used to provide corrosion protection to press hardening steel grades. The use of coatings has drawbacks such as coating delamination or liquid metal-induced embrittlement. In the present work, the microstructural evolution of Al-Zn coating during press hardening was studied. The 55 wt pct Al-Zn coating can in principle provide both Al barrier protection and Zn cathodic protection to press hardened steel. During the heat treatment associated with the press hardening, the 55 wt pct Al-Zn alloy coating is converted to an intermetallic surface layer of Fe2Al5 and a FeAl intermetallic diffusion layer. The Zn is separated from both intermetallic compounds and accumulates at grain boundaries and at the surface. This Zn separation process is beneficial in terms of providing cathodic protection to Al-Zn coated press hardening steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K. Steinhoff, N. Barbakadze, and M. Schupfer: Galvatech 2011 conference, Genova, Italy, 2011, pp. 319–26.
2. K.-P. Imlau, K.-J. Peters, and B. Schuhmacher: Galvatech 2011 conference, Genova, Italy, 2011, pp. 13–22.
3. J. Kondratiuk, P. Kuhn, E. Labrenz, C. Bischoff: Surf. Coat. Technol., 205 (2011) 4141–53.10.1016/j.surfcoat.2011.03.002 ↗
4. K. Mori, K. Akita, Y. Abe: Int. J. Mach. Tools Manuf., 47 (2) (2007) 321–25.10.1016/j.ijmachtools.2006.03.013 ↗
5. H. Karbasian, A.E. Tekkaya, J. Mater. Process. Technol., 210 (2010) 2103–18.10.1016/j.jmatprotec.2010.07.019 ↗
6. C.-E. Ridderstråle, Patent GB1490535, Sweden, 1977.
7. H. Liu, X. Jin, H. Dong, J. Shi (2011) Mater. Charact., 62:223–27.10.1016/j.matchar.2010.12.003 ↗
8. D.W. Fan, H.S. Kim, J.K. Oh, K.G. Chin, B.C. De Cooman, ISIJ Int., 50 (2010) 561–68.10.2355/isijinternational.50.561 ↗
9. F. Borsetto, A. Ghiotti, S. Bruchi, Key Eng. Mater., 410–411 (2009) 289–96.10.4028/www.scientific.net/KEM.410-411.289 ↗
10. D.W. Fan and B.C. De Cooman: Steel Res. Int., 2012, vol. 83, pp. 412–33.10.1002/srin.201100292 ↗
11. D.W. Fan and B.C. De Cooman: ISIJ Int., 2010, vol. 50, pp. 1713–18.10.2355/isijinternational.50.1713 ↗
12. C. Alléy, L. Dosdat, O. Clauzeau, K. Ogle, P. Volovitch, Surf. Coat. Technol., 238 (2014) 188–96.10.1016/j.surfcoat.2013.10.072 ↗
13. C.W. Lee, D.W. Fan, S.J. Lee, I.R. Sohn, and B.C. De Cooman: Proc. of GALVATECH 2011 Conf., Genova, Italy, 2011, pp. 327–34.
14. C.W. Lee, D.W. Fan, I.R. Sohn, S.J. Lee, B.C. De Cooman, Metall. Mater. Trans. A, 43 (2012) 5122–27.10.1007/s11661-012-1316-0 ↗
15. P. Drillet, R. Grigorieva, G. Leuillier, and T. Vietoris: 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Genova, Italy, 2011, pp. 371–78.
16. J. Federl: 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, Kassel, Germany, 2008, pp. 283–91.
17. J.H. Selverian, M.R. Notis, A.R. Marder, J. Mater. Eng., 9 (1987) 133–40.10.1007/BF02833702 ↗
18. A.R. Marder, Prog. Mater. Sci., 45 (2000) 191–271.10.1016/S0079-6425(98)00006-1 ↗
19. J.L. Murray, Bull. Alloy Phase Diagr., 4 (1983) 55–73.10.1007/BF02880321 ↗
20. Y.Y. Chang, C.C. Tsaur, J.C. Rock, Surf. Coat. Technol., 200 (2006) 6588–93.10.1016/j.surfcoat.2005.11.038 ↗
21. M.G. Nicholas and C.F. Old: J. Mater. Sci., 14 (1979) 1–18.10.1007/BF01028323 ↗
22. R. Autengruber, G. Luckeneder, A. S. Kolnberger, J. Federl, A. W. Hassel, Steel Res. Int., 83 (2012) 1005–11.10.1002/srin.201200068 ↗