journal article·2002-08

Explicit finite element method simulation of consolidation of monolithic and composite powders

X. J. Xin, P. Jayaraman, G. Jiang, R. H. Wagoner, G. S. Daehn

Publisher page

Abstract

The explicit finite element method (FEM) has been used to simulate the compaction of monolithic and composite powder compacts. It is concluded that with the proper FEM model and appropriate loading speed, explicit FEM can be used to simulate powder compaction with satisfactory accuracy. The simulated pressure-density curves for four periodic powders are in reasonable agreement with experiments using model powders consisting of rods. The effects of the friction coefficient, Poisson’s ratio, and hardening exponent on densification are investigated. Powder compacts consisting of particles with larger Poisson’s ratio, larger interparticle friction, and larger hardening exponent are more diffcult to consolidate in monotonic compaction. Compaction of multiparticle arrays is also simulated to assess the effects of packing randomness and particle rearrangement. The results reveal that local packing details affect the compaction behavior and, in general, the more heterogeneous the powder mixture is, the more difficult it is to consolidate the powder compact. Networking of hard particles significantly increases the densification resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. D.L. Erich: Int. J. Powder Met., 1987, vol. 23, pp. 45–54.
2. A.R. Hyde: Mater. Design, 1990, vol. 11, pp. 30–36.10.1016/0261-3069(90)90087-Z ↗
3. A.R. Akisanya, A.C.F. Cocks, and N.A. Fleck: J. Mech. Phys. Solids, 1994, vol. 42, pp. 1067–85.10.1016/0022-5096(94)90060-4 ↗
4. N.A. Fleck: J. Mech. Phys. Solids, 1995, vol. 43, pp. 1409–31.10.1016/0022-5096(95)00039-L ↗
5. R.W. Heckel: Trans. TMS-AIME, 1961, vol. 221, pp. 671–75.
6. A. Schofield and C.P. Wroth: Critical State Soil Mechanics, McGraw-Hill, New York, NY, 1968.
7. A.S. Helle, K.E. Easterling, and M.F. Ashby: Acta Metall., 1985, vol. 33, pp. 2163–74.10.1016/0001-6160(85)90177-4 ↗
8. A.L. Gurson: Advances in Powder Metallurgy and Particulate Materials, Proc. 1992 Int. Conf. Exhib. on Powder Metallurgy & Particulate Materials, Metal Powder Industries Federation, Princeton, NJ, 1992, vol. 2, pp. 133–45.
9. S. Brown and G. Abou-Chedid: J. Mech. Phys. Solids, 1994, vol. 42, pp. 383–99.10.1016/0022-5096(94)90024-8 ↗
10. A.R. Akisanya, A.C.F. Cocks, and N.A. Fleck: Int. J. Mech. Sci., 1997, vol. 39, pp. 1315–24.10.1016/S0020-7403(97)00018-0 ↗
11. I. Sridhar and N.A. Fleck: Acta Mater., 2000, vol. 48, pp. 3341–52.10.1016/S1359-6454(00)00151-8 ↗
12. S. Shima and M. Oyane: Int. J. Mech. Sci., 1976, vol. 18, pp. 285–91.10.1016/0020-7403(76)90030-8 ↗
13. S.B. Brown and G.G.A. Weber: Proc. 1988 Int. Powder Metallurgy Conf., American Powder Metallurgy Institute, Princeton, NJ, 1988, vol. 18, pp. 465–76.
14. A. Casagranda, J. Xu, A.G. Evans, and R.M. McMeeking: J. Am. Ceram. Soc., 1996, vol. 795, pp. 1265–72.10.1111/j.1151-2916.1996.tb08583.x ↗
15. A.R. Akisanya and A.C.F. Cocks: J. Mech. Phys. Solids, 1995, vol. 43, pp. 605–36.10.1016/0022-5096(94)00078-J ↗
16. N.A. Fleck, L.T. Kuhn, and R.M. McMeeking: J. Mech. Phys. Solids, 1992, vol. 40, pp. 1139–62.10.1016/0022-5096(92)90064-9 ↗
17. A.K. Bhattacharya and E. Arzt: Scripta Metall. Mater., 1993, vol. 28, pp. 395–400.10.1016/0956-716X(93)90072-Z ↗
18. F.F. Lange, L. Atteraas, F. Zok, and J.R. Porter: Acta Metall., 1991, vol. 39, pp. 209–19.10.1016/0956-7151(91)90269-7 ↗
19. J. Besson and A.G. Evans: Acta Metall. Mater., 1992, vol. 40, pp. 2247–55.10.1016/0956-7151(92)90143-3 ↗
20. E.K.H. Li and P.D. Funkenbusch: Metall. Trans. A, 1993, vol. 24A, pp. 1345–54.10.1007/BF02668202 ↗
21. C.-Y. Huang and G.S. Daehn: Acta Mater., 1996, vol. 44, pp. 1035–45.10.1016/1359-6454(95)00327-4 ↗
22. C.D. Turner and M.F. Ashby: Acta Mater., 1996, vol. 44, pp. 4521–30.10.1016/1359-6454(96)00064-X ↗
23. C-Y. Huang and G.S. Daehn: Acta Mater., 1997, vol. 45, pp. 4283–96.10.1016/S1359-6454(97)00073-6 ↗
24. A. Zavaliangos and A. Laptev: Acta Mater., 2000, vol. 48, pp. 2565–70.10.1016/S1359-6454(00)00066-5 ↗
25. H.J. Feise: Powder Technol., 1998, vol. 98, pp. 191–200.10.1016/S0032-5910(98)00064-3 ↗
26. R.E. Dutton and S.L. Semiatin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1471–75.10.1007/s11661-998-0362-0 ↗
27. F. Saraber, G.G. Enstad, and G. Haaker: Powder Technol., 1991, vol. 64, pp. 183–90.10.1016/0032-5910(91)80132-3 ↗
28. I. Aydin, B.J. Briscoe, and K.Y. Sanliturk: Comput. Mater. Sci., 1994, vol. 3, pp. 55–68.10.1016/0927-0256(94)90153-8 ↗
29. S. Krishnaswami and J.R.L. Trasorras: in Net Shape Processing of Powder Materials, S. Krishnaswami, R.M. McMeeking, and J.R.L. Trasorras, eds., ASME, New York, NY 10016, 1995, AMD-vol. 216, pp. 89–98.
30. J. Xu and R.M. McMeeking: Int. J. Mech. Sci., 1995, vol. 37, pp. 883–97.10.1016/0020-7403(94)E0093-X ↗
31. R.W. Lewis and A.R. Khoei: Comput. Meth. Appl. Mech. Eng., 1998, vol. 159, pp. 291–328.10.1016/S0045-7825(97)00276-4 ↗
32. R.J. Henderson, H.W. Chandler, A.R. Akisanya, H. Barber, and B. Moriarty: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 1121–28.10.1016/S0955-2219(99)00280-0 ↗
33. G. Jiang, G.S. Daehn, J.J. Lannutti, Y. Fu, and R.H. Wagoner: Acta Mater., 2001, vol. 49, pp. 1471–77.10.1016/S1359-6454(01)00026-X ↗
34. G. Jiang, G.S. Daehn, and R.H. Wagoner: Scripta Mater., 2001, vol. 44, pp. 287–92.10.1016/S1359-6462(00)00579-0 ↗
35. W. Wu, G. Jiang, R.H. Wagoner, and G.S. Daehn: Acta Mater., 2000 vol. 48, pp. 4323–30.10.1016/S1359-6454(00)00206-8 ↗
36. G. Jiang, W. Wu, G.S. Daehn, and R.H. Wagoner: Acta Mater., 2000, vol. 48, pp. 4331–35.10.1016/S1359-6454(00)00207-X ↗
37. X.J. Xin, P. Jayaraman, G.S. Daehn and R.H. Wagoner: Kansas State University, Manhattan, KS, unpublished research, 2001.
38. John O. Hallquist: LS-DYNA Keywords Manual: Non-Linear Dynamic Analysis of Structures, version 9.50, Livermore Software Technology Corporation, Livermore, CA 94550, 1999.
39. A. Mattiasson, P. Strange, A. Thilderkvist, and A. Samuelsson: 5th Int. Conf. on NUMIFORM, New York, NY, 1995, pp. 115–24.
40. N. He and R.H. Wagoner: in NUMISHEET 96, J.K. Lee, G.L. Kinzel, and R.H. Wagoner, eds. The Ohio State University, Columbus, OH, 1996, pp. 308–15.