Corrosion of Ga-doped Sn-0.7Cu Solder in Simulated Marine Atmosphere
Source abstract
Abstract
The surface corrosion behaviors of Sn and Sn-0.7Cu solder in simulated marine atmosphere have been studied. The results showed that pitting and uniform corrosion are the two main initial damage types in the corrosion process. During uniform corrosion, the initial corrosion products, which gradually develop a laminated corrosion film with microcracks, are fragile and easily spall off the surface, thus giving little resistance to further corrosion. XRD of the long-term corrosion products showed that they are mainly amorphous SnO and crystalline Sn(OH)2 and SnO·xH2O. Doping the Sn-0.7Cu with gallium significantly improved the corrosion resistance of the alloy in the salt spray test. X-ray photoelectron spectroscopy results showed that the trace amount of Ga significantly segregates to the surface of Sn-0.7Cu alloy and forms a composite oxide layer after solidification in air, thus improving the corrosion resistance. On the other hand, doping the Sn-0.7Cu alloy with phosphorus had little effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. R.A. Islam, Y.C. Chan, W. Jillek, and S. Islam: Microelectron. J., 2005, vol. 37, pp. 705–13.10.1016/j.mejo.2005.12.010 ↗
2. Directive 2002/95/EC of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Off. J. Eur. Union., 2003, vol. 27, pp. 19–23.
3. Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and electronic equipment, Off. J. Eur. Union., 2003, vol. 27, pp. 24–38.
4. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R., 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
5. T. Satyanarayan and K.N. Prabhu: Adv. Colloid Interface Sci., 2011, vol. 166, pp. 87–118.10.1016/j.cis.2011.05.005 ↗
6. M.R. Harrison, J.H. Vincent, and H.A.H. Steen: Soldering & Surf. Mout. Tech., 2001, vol. 13, pp. 21–38.10.1108/09540910110407388 ↗
7. Q.L. Zeng, Z.G. Wang, A.P.Xian, and J.K.Shang: J. Electron. Mater., 2005, vol. 34, p. 62.10.1007/s11664-005-0181-7 ↗
8. J.J. Guo, A.P.Xian, and J.K. Shang: Surf. Coat. Technol., 2007, vol. 202, pp. 268–74.10.1016/j.surfcoat.2007.05.055 ↗
9. T. Laurila, V. Vuorinen, and J.K. Kivilahti: Mater. Sci. Eng., R, 2005, vol. 49, pp. 1–60.10.1016/j.mser.2005.03.001 ↗
10. H.C. Shi and A.P Xian: J. Electron. Mater., 2011, vol. 40, pp. 1662–966.10.1007/s11664-011-1701-2 ↗
11. M.Liu and A.P.Xian: J. Electron. Mater., 2009, vol. 38, pp. 2353–61.10.1007/s11664-009-0926-9 ↗
12. M.Liu and A.P.Xian: Microelectronics Reliability, 2009, vol. 49, pp. 667–72.10.1016/j.microrel.2009.03.012 ↗
13. M. Liu and A.P. Xian: J Alloy Compd., 2009, vol. 486, pp. 590–96.10.1016/j.jallcom.2009.07.012 ↗
14. A.P. Xian and M. Liu: J. Mater. Res., 2009, vol. 24, pp. 2775–83.10.1557/jmr.2009.0334 ↗
15. H.C. Shi and A.P. Xian: J. Electron. Mater., 2011, vol. 40, pp. 1962-1966.10.1007/s11664-011-1701-2 ↗
16. M. Liu and A.P. Xian: Sci. China-Technol., 2011, vol. 54, pp. 1546–50.10.1007/s11431-011-4381-5 ↗
17. Y.H. Hasiao, H.W. Tseng, and C.Y. Liu: J. Electron. Mater., 2009, vol. 38, pp. 2573–78.10.1007/s11664-009-0914-0 ↗
18. A.P. Xian and G.L. Gong: J. Mater. Res., 2008, vol. 23, pp. 1532–36.10.1557/JMR.2008.0202 ↗
19. A.P. Xian and G.L. Gong: J. Electron. Mater., 2007, vol. 36, pp. 1669–78.10.1007/s11664-007-0288-0 ↗
20. G.L. Gong and A.P. Xian: Acta Mater. Sinica, 2007, vol. 43, pp. 759–63.
21. U.S. Mohanty and K.L. Lin: Corros. Sci., 2008, vol. 50, pp. 2437–43.10.1016/j.corsci.2008.06.042 ↗
22. U.S. Mohanty and K.L. Lin: Corros. Sci., 2006, vol. 48, pp. 662–78.10.1016/j.corsci.2005.02.003 ↗
23. D.Z. Li, P.P. Conway, and J.K. Yang: Corros. Sci., 2008, vol. 50, pp. 995–1004.10.1016/j.corsci.2007.11.025 ↗
24. B.Y. Wu, Y.C. Chan, M.O. Alam and W. Jilek: J. Mater. Res., 2006, vol. 12, pp. 62–70.10.1557/jmr.2006.0035 ↗
25. L. Hua, X.P. Guo, and J.K. Yang" J. Chin. Soc. Corros. & Prot., 2010, vol. 30, pp. 469–74.
26. J.W. Osenbach, J.M. Delucca, and B.D. Potteiger: Electron. Pack., 2007, vol. 30, pp. 23–35.10.1109/TEPM.2006.890637 ↗
27. C. Anderson and J. Liu: Int. J. Fatig., 2008, vol. 30, pp. 917–30.10.1016/j.ijfatigue.2007.06.009 ↗
28. F. Rosalbino, G. Zanicehi, R. Carlini, E. Angelini, and R. Marazza: Mater Corros., 2012, vol. 63, pp. 492–96.10.1002/maco.201005979 ↗
29. L. Hua, G.K. Yang, and H.Q. Zhang: Adv. Mater. Res., 2011, vol. 146, pp. 953–61.10.4028/www.scientific.net/AMR.146-147.953 ↗
30. Z. Yan and A.P.Xian: Acta Mater. Sinica, 2011, vol. 47, p. 25.
31. M. Liu: Master’s Thesis, Institute of Metal Research, Chinese Academy of Science, Shenyang, China, 2009.
32. Z. Yan: Master’s Thesis, Institute of Metal Research, Chinese Academy of Science, Shenyang, China, 2012.
33. R.W.M.Kwok: XPS Peak Fitting Programme for WIN95/98 XPSPEAK Version 4.1, Department of Chinese, University of Hong Kong.
34. A.P. Xian and G.L. Gong: J. Electron. Mater., vol. 36, pp. 1669–78.10.1007/s11664-007-0288-0 ↗
35. E. Fazioa, F. Neria, R. Ruggeria, G. Sabatinob, S. Trussoc, and G. Manninod: Appl Surf. Sci, 2011, vol. 257, pp. 2520–25.10.1016/j.apsusc.2010.10.015 ↗
36. H. Morimoto, M. Tatsumisago, and T. Minami: Electrochem Solid-State Lett. A, 2001, vol. 4A, pp. 16–18.10.1149/1.1339239 ↗
37. R. Dolbec, M.A. ElKhakani, A.M. Serventi, M. Trudeau, and R.G. Saint-Jacques: Thin Solid Films. 2002, vol. 49, pp. 230–36.10.1016/S0040-6090(02)00769-1 ↗
38. J.D. Donaldson and W. Moser: J. Am. Chem. Soc., 1968, vol. 835, p. 245.
39. A. Howie and W. Moser: Nature, 1968, vol. 219, pp. 372–73.10.1038/219372a0 ↗
40. S. Nagasaki and M. Hirabayashi: Binary Alloy Phase-diagrams, 2002, Translated by A.S.Liu, Metallurgical Industry Press, Beijing, 2004, p. 142.
41. Q.V. Bui, N.D. Nam, B.-I. Noh, A. Kar, J.-G. Km, and S.-B. Tung: Mater Corros. 2010, vol. 61, pp. 30–33.10.1002/maco.200905237 ↗
42. M. Mori, K. Miura, T. Sasaki, and T. Ohtska: Corros. Sci. 2002, vol. 44, pp. 887–98.10.1016/S0010-938X(01)00094-4 ↗
43. H. Chang, H.T. Chen, M.Y. Li, L. Wang, and Y.G. Fu: J. Electron. Mater., 2009, vol. 38, pp. 2170–78.10.1007/s11664-009-0868-2 ↗