journal article·2008-03

Transmission Electron Microscopy and Nanoindentation Study of the Weld Zone Microstructure of Diode-Laser-Joined Automotive Transformation-Induced Plasticity Steel

J. Chen, K. Sand, M.S. Xia, C. Ophus, R. Mohammadi, M.L. Kuntz, Y. Zhou, D. Mitlin

Publisher page

Abstract

We have used transmission electron microscopy (TEM) and nanoindentation to characterize the dominant phases present in the weld zone of a diode-laser-welded transformation-induced plasticity (TRIP) steel, examining the unaffected base metal as a baseline. The microstructure of the base metal consists predominantly of ferrite, retained austenite, martensite, and occasional large carbide particles. The dominant microstructure of the weld zone is of differently oriented packets having a bainitic morphology. The weld also contains allotriomorphic ferrite, idiomorphic ferrite, as well some twinned martensite that is surrounded by austenite. The TEM analysis of the bainitic-morphology packets indicates that they consist of a lath ferrite phase separated by an interlath carbon-enriched retained austenite. In most cases, the orientation relationship (OR) between the lath ferrite and the interlath retained austenite can be approximated as Nishiyama–Wasserman (N-W). We used site-specific nanoindentation to further characterize the packets and the allotriomorphic ferrite, confirming through the hardness values the conclusions reached by TEM. While martensite was regularly present in the base metal, it was only sparsely distributed within the weld zone, boding well for the weld’s mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. S. Zaefferer, J. Ohlert, W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765–7810.1016/j.actamat.2004.02.044 ↗
2. P.J. Jacques: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 259–6510.1016/j.cossms.2004.09.006 ↗
3. H.K.D.H. Bhadeshia: ISIJ Int., 2002, vol. 42, pp. 1059–60.10.2355/isijinternational.42.1059 ↗
4. T.K. Han, S.S. Park, K.H. Kim, C.Y. Kang, I.S. Woo, J.B. Lee: ISIJ Int., 2005, vol. 45, pp. 60–6510.2355/isijinternational.45.60 ↗
5. T.K. Han, K.H. Kim, B.I. Kim, C.Y. Kang, I.S. Woo, J.B. Lee: Mater. Sci. Forum, 2004, vols. 449–452, pp. 409–12.10.4028/www.scientific.net/MSF.449-452.409 ↗
6. P.L. Moore, D.S. Howse, and E.R. Wallach: 6th Int. Conf. on Trends in Welding Research, Pine Mountain, GA, May 2002, oral presentation and private communication
7. S. Lawson, X. Li, and Y. Zhou: Sheet Metal Welding Conf. XII, Livonia, MI, May 2006, p. 9
8. K.W. Andrews, D.J. Dyson, S.R. Keown: Interpretation of Electron Diffraction Patterns, 2nd ed., Plenum Press, New York, NY, 1971, pp. 210–11
9. G.R. Speich, W.C. Leslie: Metall. Trans., 1972, vol. 3, p. 1043.10.1007/BF02642436 ↗
10. A.Z. Hanzaki, P.D. Hodgson, S. Yue: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2405–1410.1007/s11661-997-0197-0 ↗
11. B. Verlinden, P. Bocher, E. Girault, E. Aernoudt: Scripta Mater., 2001, vol. 45, pp. 909–1610.1016/S1359-6462(01)01110-1 ↗
12. R.W.K. Honeycombe, H.K.D.H. Bhadeshia: Steels Microstructure and Properties, 2nd ed., Butterworth Heinemann, Oxford, United Kingdom, 2000, pp. 115–39
13. H.K.D.H. Bhadeshia: private communication, University of Cambridge, UK, Dec 2006
14. Q. Furnemont, M. Kempf, P.J. Jacques, M. Goken, F. Delannay: Mater. Sci. Eng. A, 2002, vol. 328, pp. 26–32.10.1016/S0921-5093(01)01689-6 ↗
15. J. Angeli, A.C. Kneissl: Z. Metallkd., 2004, vol. 95, pp. 601–0610.3139/146.017995 ↗
16. M. De Meyer, D. Vanderschueren, B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
17. H.K.D.H. Bhadeshia, D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–0710.1007/BF02658309 ↗
18. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–0310.1016/j.cossms.2004.10.002 ↗
19. R.W.K. Honeycombe, F.B. Pickering: Metall. Trans., 1972, vol. 3, p. 109910.1007/BF02642441 ↗
20. H.K.D.H. Bhadeshia: Bainite in Steels: Transformations, Microstructure and Properties, 2nd ed., IOM Communications, Ltd., London, 2001, pp. 19–61
21. T. Maki, C.M. Wayman: Acta Metall., 1977, vol. 25, pp. 695–71010.1016/0001-6160(77)90012-8 ↗
22. T.V. Eterashvili, L.M. Utevskiy, M.N. Spasskiy: Fiz. Met. Metall., 1979, vol. 48, pp. 807–15
23. G. Spanos, R.W. Fonda, R.A. Vandermeer, A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3277–9310.1007/BF02669455 ↗
24. R.W. Fonda, G. Spanos: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2145–5310.1007/s11661-000-0132-0 ↗
25. P.M. Kelly, A. Jostsons, R.G. Blake: Acta. Metall. Mater., 1990, vol. 38, pp. 1075–8110.1016/0956-7151(90)90180-O ↗
26. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
27. J.E. Gould, S.P. Khurana, T. Li: Welding J., 2006, vol. 85, pp. 111S–116S
28. O. Akselsen, O. Grong, J. Solberg: Mater. Sci. Technol., 1987, vol. 3, pp. 649–5510.1179/mst.1987.3.8.649 ↗