Oxidation at 900 °C of the Chromized Coatings on A3 Carbon Steel with the Electrodeposition Pretreatment of Ni or Ni-CeO2 Film
Source abstract
Abstract
Chromized coatings developed on a mild carbon steel (A3) using a conventional halide-activated pack cementation method at 1120 °C inevitably formed chromium carbides in the surface zone, which is the crucial factor giving the coatings a fast scaling rate in 5 pct O2 + N2 at 900 °C, and simultaneously a severe scale spallation during cooling. No chromium carbides were seen in the chromized coatings, when the steel was pretreated with a ∼80-μm-thick precursor film of electrodeposited Ni without or with dispersions of ∼5.5 wt pct CeO2 nanoparticles. However, during oxidation of the chromized, Ni-film-treated coating in 5 pct O2 + N2, fresh chromium carbides were intensively precipitated in the coating near-surface zone. The carbides’ oxidation caused the formation of the scale, with an increased susceptibility to cracking and spalling. For the chromized, Ni-CeO2-nanocomposite-treated A3, chromium carbides were sporadically precipitated throughout the entire coating during oxidation, and the negative effect of the carbides on oxidation was prevented. This, together with the reactive element effect (REE) of the added CeO2 during oxidation, is proposed for this coating, for the purpose of thermally forming a chromia scale with a noticeably reduced growth rate and also an enhanced adhesion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.L. Samuel, N.A. Lockington: Met. Treat. Drop. Forging, 1951, vol. 18, pp. 351–59
2. A.H. Sully, E.A. Brandes: Chromium, 2nd ed., Butterworth and Co., London, 1967
3. P.J. Maziasz, R.W. Swindeman: J. Eng. Gas Turbines Power, 2003, vol. 125, pp. 310–1510.1115/1.1499729 ↗
4. S.R.J. Saunders, J.R. Nicholles: Mater. Sci. Technol., 1989, vol. 5, pp. 780–8910.1179/mst.1989.5.8.780 ↗
5. F.D. Geib, R.A. Rapp: Oxid Met., 1993, vol. 40, pp. 213–2810.1007/BF00664491 ↗
6. G.H. Meier, C. Cheng: Surf. Coat. Technol., 1989, vols. 39–40, pp. 53–6410.1016/0257-8972(89)90040-6 ↗
7. F.J. Perez, M.P. Hierro, F. Pedraza, C. Gomez, M.C. Carpintero: Surf. Coat. Technol., 1991, vols. 120–121, pp. 151–57
8. J.W. Lee, J.G. Duh: Surf. Coat. Technol., 2004, vol. 177–178, pp. 525–3110.1016/j.surfcoat.2003.08.031 ↗
9. G. Lehnert, H. Meinhardt: Electrodeposition Surf. Treat., 1972, vol. 1, pp. 189–26710.1016/0300-9416(73)90013-8 ↗
10. J. Nicholls: MRS Bull., 2003, vol. 28, pp. 659–7010.1557/mrs2003.194 ↗
11. A. Selcuk, A. Atkinson: Acta Mater., 2003, vol. 51, pp. 535–4910.1016/S1359-6454(02)00436-6 ↗
12. D.X. He, H.R. Guan, X.F. Sun, X.X. Jiang: Thin Solid Films, 2000, vol. 376, pp. 144–5110.1016/S0040-6090(00)01198-6 ↗
13. H.J. Kim, M.E. Walter: Mater. Sci. Eng., 2003, vol. A360, pp. 7–1710.1016/S0921-5093(02)00733-5 ↗
14. B. Gleeson, W. Wang, S. Hayashi, D. Sordelet: Mater. Sci. Forum, 2004, vols. 461–464, pp. 213–2210.4028/www.scientific.net/MSF.461-464.213 ↗
15. X. Peng, T. Li, W.P. Pan: Scripta Mater., 2001, vol. 44, pp. 1033–3810.1016/S1359-6462(01)00666-2 ↗
16. L. Zhu, X. Peng, J. Yan, F. Wang: Oxid. Met., 2004, vol. 62, pp. 411–2610.1007/s11085-004-0921-8 ↗
17. J. Yan, X. Peng, F. Wang: Mater. Sci. Eng., 2006, vol. A426, pp. 266–7310.1016/j.msea.2006.04.030 ↗
18. X. Peng, D. Ping, T. Li, W. Wu: J. Electrochem. Soc., 1998, vol. 145, pp. 389–9810.1149/1.1838274 ↗
19. X. Peng, T. Li, W. Wu: Oxid. Met., 1999, vol. 51, pp. 291–31510.1023/A:1018874707526 ↗
20. R. Weil, H.C. Cook: J. Electrochem. Soc., 1962, vol. 109, pp. 295–30110.1149/1.2425403 ↗
21. A.G. McCormack, M.J. Oomeroy, V.J. Cunnane: J. Electrochem. Soc., 2003, vol. 150, pp. C356–6110.1149/1.1566961 ↗
22. M.J. Fleetwood: J. Inst. Met., 1966, vol. 94, pp. 218–33
23. A.G. Evans, J.W. Hutchinson: Int. J. Solids Struct., 1984, vol. 20, pp. 455–6110.1016/0020-7683(84)90012-X ↗
24. M.D. Thouless, J.W. Hutchinson, E.G. Liniger: Acta Metall. Mater., 1992, vol. 40, pp. 2639–4910.1016/0956-7151(92)90333-A ↗
25. D.P. Whittle, J. Stringer: Philos. Trans. R. Soc. London., 1980, vol. A295, p. 209
26. D.P. Moon: Mater. Sci. Technol., 1989, vol. 5, pp. 754–6410.1179/mst.1989.5.8.754 ↗
27. P.Y. Hou, J. Stringer: Mater. Sci. Eng., 1995, vol. A202, pp. 1–1010.1016/0921-5093(95)09798-8 ↗
28. G.J. Yurek, D. Eisen, A. Garratt-Reed: Metall. Trans. A, 1982, vol. 13A, pp. 473–8510.1007/BF02643355 ↗
29. C.M. Cotell, G.J. Yurek, R.J. Hussey, D.F. Mitchell, M.J. Graham: J. Electrochem. Soc., 1987, vol. 134, pp. 1871–7210.1149/1.2100775 ↗
30. B. Pieraggi, R.A. Rapp: J Electrochem. Soc., 1993, vol. 140, pp. 2844–5010.1149/1.2220920 ↗
31. J.P. Hirth, B. Pieraggi, R.A. Rapp: Acta Metall. Mater., 1995, vol. 43, pp. 1065–7310.1016/0956-7151(94)00296-T ↗