journal article·2015-02Open access

Cracks in Martensite Plates as Hydrogen Traps in a Bearing Steel

W. Solano-Alvarez, Eun Ju Song, Do Kyeong Han, Dong-Woo Suh, H. K. D. H. Bhadeshia

Abstract

It is demonstrated that a macroscopically homogeneous distribution of tiny cracks introduced into a martensitic bearing steel sample can provide powerful hydrogen traps. The phenomenon has been investigated through thermal desorption spectroscopy and hydrogen permeation measurements using both cracked and integral samples. The effective hydrogen diffusion coefficient through the cracked sample is found to be far less than in the un-cracked one. Similarly, when samples are charged with hydrogen, and then subjected to thermal desorption analysis, the amount of hydrogen liberated from the cracked sample is smaller due to the trapping by the cracks. Theoretical analysis of the data shows that the traps due to cracks are so strong, that any hydrogen within the cracks can never in practice de-trap and cause harm by mechanisms that require the hydrogen to be mobile for the onset of embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2012, vol. 57, pp. 268–435.10.1016/j.pmatsci.2011.06.002 ↗
2. R. Irving and N.A. Scarlett: Wear, 1964, vol. 7, pp. 244–54.10.1016/0043-1648(64)90087-0 ↗
3. Y. Matsubara and H. Hamada: in Bearing Steel Technology—Advances and State of the Art in Bearing Steel Quality Assurance, J.M. Beswick, ed., ASTM International, West Conshohocken, PA, 2007, pp. 153–66.10.1520/STP41648S ↗
4. M.-H. Evans: Mater. Sci. Technol., 2012, vol. 28, pp. 3–22.10.1179/026708311X13135950699254 ↗
5. P. Schatzberg and I.M. Felsen: Wear, 1968, vol. 12, pp. 331–42.10.1016/0043-1648(68)90536-X ↗
6. K. Tamada and H. Tanaka: Wear, 1996, vol. 199, pp. 245–52.10.1016/0043-1648(96)06990-6 ↗
7. L. Grunberg, D.T. Jamieson, and D. Scott: Philos. Mag., 1963, vol. 8, pp. 1553–68.10.1080/14786436308207318 ↗
8. T. Imran, B. Jacobson, and A. Shariff: Wear, 2006, vol. 261, pp. 86–95.10.1016/j.wear.2005.09.026 ↗
9. R.A. Oriani: Corrosion, 1987, vol. 43, pp. 390–97.10.5006/1.3583875 ↗
10. H.K. Brinbaum and P. Sofronis: Mater. Sci. Eng., A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
11. A.R. Troiano: Trans. ASM, 1960, vol. 52, pp. 54–80.
12. E.J. Song, H.K.D.H. Bhadeshia, and D.-W. Suh: Corros. Sci., 2013, vol. 77, pp. 379–84.10.1016/j.corsci.2013.07.043 ↗
13. M. Śmiałowski: Hydrogen in Steel; Effect of Hydrogen on Iron and Steel During Production, Fabrication and Use, Pergamon Press, Oxford, 1962.
14. G.M. Pressouyre: Metall. Trans. A, 1979, vol. 10A, pp. 1571–73.10.1007/BF02812023 ↗
15. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
16. W. Solano-Alvarez and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4907–15.10.1007/s11661-014-2430-y ↗
17. W. Solano-Alvarez and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4916–31.10.1007/s11661-014-2431-x ↗
18. C.A. Stickels: Metall. Trans., 1974, vol. 5, pp. 865–74.10.1007/BF02643140 ↗
19. B.D. Craig: Acta Metall., 1977, vol. 25, pp. 1027–30.10.1016/0001-6160(77)90131-6 ↗
20. A.T.W. Barrow, J.H. Kang, and P.E.J.R.-D. del Castillo: Acta Mater., 2012, vol. 60(6), pp. 2805–15.10.1016/j.actamat.2012.01.046 ↗
21. K. Kawakami and T. Matsumiya: ISIJ Int., 2013, vol. 53(4), pp. 709–13.10.2355/isijinternational.53.709 ↗
22. M.A.V. Devanathan and Z. Stachurski: Proc. R. Soc. Lond. A Math. Phys. Sci., 1962, vol. 270(1340), pp. 90–102.10.1098/rspa.1962.0205 ↗
23. ISO-17081: Method of Measurement of Hydrogen Permeation and Determination of Hydrogen Uptake and Transport in Metals by an Electro- Chemical Technique, Technical Report, 2004.
24. D.K. Han, K.Y. Kim, S.J. Kim, and H.G. Jung: in The Twenty-third International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers, 2013.
25. T. Tarui and M. Kubota: Approaches for Fundamental Principles 1: Evaluation Method of Hydrogen Embrittlement and Improvement Techniques of Delayed Fracture, Technical Report 101, Nippon Steel 2012.
26. L.C.D. Fielding, E.J. Song, D.K. Han, H.K.D.H. Bhadeshia, and D.-W. Suh: Proc. R. Soc. A, 2014, vol. 470, p. 20140108.10.1098/rspa.2014.0108 ↗
27. E.J. Song, D.W. Suh, and H.K.D.H. Bhadeshia: Comput. Mater. Sci., 2013, vol. 79, pp. 36–44.10.1016/j.commatsci.2013.06.008 ↗
28. H. Swahn, P.C. Becker, and O. Vingsbo: Met. Sci., 1976, vol. 10, pp. 35–39.10.1179/030634576790431444 ↗
29. O.D. Gonzalez: Trans. Metall. Soc. Am. Inst. Min. Metall. Pet. Eng., 1969, vol. 245, pp. 607–12.
30. J.W. Christian: in International Conference on Martensitic Transformations ICOMAT’79, G.B. Olson and M. Cohen, eds., Alpine Press, Massachusetts, 1979, pp. 220–34.
31. K. Huber and G. Herzberg: Molecular Spectra and Molecular Structure 4: Constants of Diatomic Molecules, Van Norstrand Reinhold Co, New York, 1979.10.1007/978-1-4757-0961-2 ↗
32. R. Gibala, J. Ratka, J. Talia, and S. Wu: Environmental Reactions and Their Effects on Mechanical Behavior of Metallic Materials, Technical Progress Report, Case Western Reserve University, 1980.10.2172/6792365 ↗