Kinetics of biaxial dome formation by transformation superplasticity of titanium alloys and composites
Source abstract
Abstract
By thermally cycling through their transformation temperature range, coarse-grained polymorphic materials can be deformed superplastically, owing to the emergence of transformation mismatch plasticity (or transformation superplasticity) as a deformation mechanism. This mechanism is presently investigated under biaxial stress conditions during thermal cycling of unalloyed titanium, Ti-6Al-4V, and their composites (Ti/10 vol. pct TiC p , Ti-6Al-4V/10 vol. pct TiC p , and Ti-6Al-4V/5 vol. pct TiB w ). During gas-pressure dome bulging experiments, the dome height was measured as a function of forming time. Adapting existing models of biaxial doming to the case of transformation superplasticity where the strain-rate sensitivity is unity, we verify the operation of this deformation mechanism in all experimental materials and compare the biaxial results directly to new uniaxial thermal cycling results on the same materials. Finally, existing thickness distribution models are compared with experimentally measured profiles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. S. Lampman: in ASM Handbook: Properties and Selection: Nonferrous Alloys and Special Purpose Materials, ASM INTERNATIONAL, Metals Park, OH, 1990, p. 614.
2. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997.10.1017/CBO9780511525230 ↗
3. G.W. Greenwood and R.H. Johnson: Proc. R. Soc. London, 1965, vol. 283, pp. 403–22.
4. C. Schuh and D.C. Dunand: Acta Mater., 2001, vol. 49, pp. 199–210.10.1016/S1359-6454(00)00318-9 ↗
5. F.W. Clinard and O.D. Sherby: Acta Metall., 1964, vol. 12, pp. 911–19.10.1016/0001-6160(64)90151-8 ↗
6. A.G. Young, K.M. Gardiner, and W.B. Rotsey: J. Nucl. Mater., 1960, vol. 2, p. 234.10.1016/0022-3115(60)90058-1 ↗
7. D. Oelschlagel and V. Weiss: Trans. Q. ASM, 1966, vol. 59, pp. 143–54.
8. T.B. Massalski, S.K. Bhattacharyya, and J.H. Perepezko: Metall. Trans. A, 1978, vol. 9A, pp. 53–56.10.1007/BF02647170 ↗
9. M. de Jong and G.W. Rathenau: Acta Metall., 1959, vol. 7, pp. 246–53.10.1016/0001-6160(59)90017-3 ↗
10. M. de Jong and G.W. Rathenau: Acta Metall., 1961, vol. 9, pp. 714–20.10.1016/0001-6160(61)90101-8 ↗
11. R. Kot, G. Krause, and V. Weiss: in The Science, Technology and Applications of Titanium, R.I. Jaffe and N.E. Promisel, eds., Pergamon, Oxford, United Kingdom 1970, pp. 597–605.10.1016/B978-0-08-006564-9.50067-1 ↗
12. C. Chaix and A. Lasalmonie: Res Mechanica, 1981, vol. 2, p. 241.
13. M. Lozinsky: Acta Metall., 1961, vol. 9, p. 689.10.1016/0001-6160(61)90007-4 ↗
14. K. Sato, T. Nishimura, and Y. Kimura: Mater. Sci. Forum, 1994, vols. 170–172, p. 207.10.4028/www.scientific.net/MSF.170-172.207 ↗
15. P. Zwigl and D.C. Dunand: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2571–82.10.1007/s11661-998-0229-4 ↗
16. K. Nuttall and D.P. McCooeye: in Mechanical Behavior of Materials, The Society of Materials Science, Japan, 1974, pp. 129–40.
17. K. Nuttall: Scripta Metall., 1976, vol. 10, pp. 835–40.10.1016/0036-9748(76)90306-9 ↗
18. M. Zamora and J.P. Poirier: Mech. Mater., 1983, vol. 2, pp. 193–202.10.1016/0167-6636(83)90014-5 ↗
19. R.H. Johnson and G.W. Greenwood: Nature, 1962, vol. 195, pp. 138–39.10.1038/195138a0 ↗
20. G.W. Greenwood and R.H. Johnson: React. Sci. Technol., 1962, vol. 16, p. 473.
21. C. Schuh and D.C. Dunand: Acta Mater., 1998, vol. 46, pp. 5663–75.10.1016/S1359-6454(98)00252-3 ↗
22. D.C. Dunand and C.M. Bedell: Acta Mater., 1996, vol. 44, p. 1063.10.1016/1359-6454(95)00224-3 ↗
23. C. Schuh and D.C. Dunand: Scripta Mater., 1999, vol. 40, pp. 1305–12.10.1016/S1359-6462(99)00068-8 ↗
24. C. Schuh, W. Zimmer, and D.C. Dunand: in Creep Behavior of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 61–70.
25. C. Schuh and D.C. Dunand: Int. J. Plasticity, 2001, vol. 17, pp. 317–40.10.1016/S0749-6419(00)00038-3 ↗
26. C.A. Johnson, R.C. Bradt, and J.H. Hoke: J. Am. Ceram. Soc., 1975, vol. 58, pp. 37–40.10.1111/j.1151-2916.1975.tb18978.x ↗
27. D.C. Dunand and J.L. Grabowski: J. Am. Ceram. Soc., 2000, vol. 83, pp. 2521–28.10.1111/j.1151-2916.2000.tb01585.x ↗
28. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Metall. Trans. A, 1982, vol. 13A, pp. 355–61.10.1007/BF02643344 ↗
29. C. Schuh, P. Noël, and D.C. Dunand: Acta Mater., 2000, vol. 48, pp. 1639–53.10.1016/S1359-6454(00)00018-5 ↗
30. D.C. Dunand and J. Teisen: in Porous and Cellular Materials Structural Applications, D.S. Schwartz, D.S. Shih, H.N.G. Wadley, and A.G. Evans, eds. MRS, Pittsburgh, 1998, pp. 231–36.
31. N.G. Davis, J. Teisen, C. Schuh, and D.C. Dunand: J. Mater. Res., 2001, vol. 16, pp. 1508–19.10.1557/JMR.2001.0210 ↗
32. D.C. Dunand and S. Myojin: Mater. Sci. Eng., 1997, vol. A230, pp. 25–32.10.1016/S0921-5093(97)00033-6 ↗
33. S. Abkowitz and P. Weihrauch: Adv. Mater. Processes, 1989, vol. 7, pp. 31–34.
34. S. Abkowitz, P.F. Weihrauch, and S.M. Abkowitz: Industrial Heating, 1993, vol. 12, pp. 32–36.
35. M.E. Hyman, C. McCullough, J.J. Valenci, C.G. Levi, and R. Mehrabian: Metall. Trans. A, 1989, vol. 20A, pp. 1847–59.10.1007/BF02663215 ↗
36. T. Saito: Advanced Performance Materials, 1995, vol. 2, pp. 121–44.10.1007/BF00711267 ↗
37. K. Funami, M. Kobayashi, S. Suzuki, and C. Ouchi: Mater. Sci. Forum, 1997, vols. 243–245, pp. 515–20.
38. M. Frary: Master’s Thesis, Northwestern University, Evanston, IL, 2001.
39. W. Szkliniarz and G. Smolka: J. Mater. Processing Technol., 1995, vol. 53, pp. 413–22.10.1016/0924-0136(95)01998-T ↗
40. C. Schuh and D.C. Dunand: Mater. Sci. Forum, 2001, vols. 357–359, pp. 177–82.10.4028/www.scientific.net/MSF.357-359.177 ↗
41. F. Jovane: Int. J. Mech. Sci., 1968, vol. 10, pp. 403–27.10.1016/0020-7403(68)90005-2 ↗
42. A.R. Ragab: Met. Technol., 1983, vol. 10, pp. 340–48.10.1179/030716983803291262 ↗
43. S. Yu-Quan and Z. Jun: Mater. Sci. Eng., 1986, vol. 84, pp. 111–25.10.1016/0025-5416(86)90228-4 ↗
44. Z.X. Guo and N. Ridley: Mater. Sci. Eng., 1989, vol. A114, pp. 97–104.10.1016/0921-5093(89)90849-6 ↗
45. F.U. Enikeev and A.A. Kruglov: Int. J. Mech. Sci., 1995, vol. 37, pp. 473–83.10.1016/0020-7403(94)00081-T ↗
46. C.F. Yang, L.H. Chiu, and S.C. Lee: Scripta Mater., 1996, vol. 34, pp. 1555–60.10.1016/1359-6462(96)00019-X ↗
47. Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Metals, Park, OH, 1990.
48. A.K. Ghosh and C.H. Hamilton: Metall. Trans. A, 1982, vol. 13A, pp. 733–43.10.1007/BF02642386 ↗
49. A. Dutta and A.K. Mukherjee: Mater. Sci. Eng., 1992, vol. A157, pp. 9–13.10.1016/0921-5093(92)90092-F ↗
50. T.H. Courtney: Mechanical Behavior of Materials. McGraw-Hill, Inc., New York, NY, 1990.
51. I. Finnie and W.R. Heller: Creep of Engineering Materials. McGraw-Hill Book Company, Inc., New York, NY, 1959.
52. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps. Pergamon Press, Oxford, United Kingdom, 1982.
53. C. Schuh and D.C. Dunand: Northwestern University, Evanston, IL, unpublished research, 2000.
54. S. Ranganath and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927–35.10.1016/1359-6454(95)00242-1 ↗
55. S.J. Zhu, Y.X. Lu, Z.G. Wang, and J. Bi: Mater. Lett., 1992, vol. 13, pp. 199–203.10.1016/0167-577X(92)90220-E ↗
56. C. Schuh and D.C. Dunand: J. Mater. Res., 2001, vol. 16, pp. 865–75.10.1557/JMR.2001.0115 ↗