Fatigue Life Prediction for Porosity-Containing Cast 319-T7 Aluminum Alloy
Source abstract
Abstract
In this study, the linear elastic fracture mechanics (LEFM) approach, including use of the equivalent initial flaw size (EIFS) concept and fatigue crack propagation (FCP) rates, da/dN, as a function of either ΔK or ΔK eff, was used to predict the fatigue life of a porosity-containing 319-T7 specimen. The uniaxial fatigue tests were conducted on a 319-T7 specimen at a stress ratio (R) of −1. For the LEFM-based fatigue life prediction, da/dN-ΔK data were obtained for the 319-T7 specimen at R = 0.1. The shape and the size of the porosity were analyzed based on the fractographic and the micrographic analyses for each fatigued specimen. The LEFM concept, including the use of the EIFS value, back-calculated by using da/dN-ΔK eff data, successfully predicts the porosity-affected stress vs the number of cycles to failure (S-N) fatigue behavior of cast 319-T7 specimens. The LEFM models presently available for predicting the fatigue life of porosity-containing alloys were evaluated and a simple modification was proposed based on extensive fractographic analysis results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. T.L. Reinhart, ASM Handbook: Fatigue and Fracture, 4th ed., S.R. Lampman, ed., ASM INTERNATIONAL, Materials Park, OH, Dec., 2005, vol. 19, pp. 813–22.
2. J.M. Boileau, and J.E. Allison: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1807–20.10.1007/s11661-003-0147-4 ↗
3. C. Nyahumwa, N.R. Green, and J. Campbell: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 349–58.10.1007/s11661-001-0266-8 ↗
4. J.-Y. Buffière, S. Savelli, P.H. Jouneau, E. Maire, and R. Fougères: Mater. Sci. Eng., A, 2001, vol. A316, pp. 115–26.10.1016/S0921-5093(01)01225-4 ↗
5. M.J. Couper, A.E. Neeson, and J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13, pp. 213–27.10.1111/j.1460-2695.1990.tb00594.x ↗
6. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
7. M.J. Caton, J.W. Jones, H. Mayer, S. Stanzl-Tschegg, and J.E. Allison: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 33–41.10.1007/s11661-003-0206-x ↗
8. M.J. Caton, J.W. Jones, J.M. Boileau, and J.E. Allison: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3055–68.10.1007/s11661-999-0216-4 ↗
9. X. Zhu, A. Shyam, J.W. Jones, H. Mayer, J.V. Lasecki, and J.E. Allison: Int. J. Fatigue, 2006, vol. 28, pp. 1566–71.10.1016/j.ijfatigue.2005.04.016 ↗
10. U.G. Goranson: Damage Tolerance: Facts and Fiction, Proc. USAF Aircraft Structural Integrity Program (ASIP), San Antonio, TX, 2006.
11. P.M.G.P. Moreira, P.F.P. de Matos, and P.M.S.T. de Castro: Theor. Appl. Fract. Mech., 2005, vol. 43, pp. 89–99.10.1016/j.tafmec.2004.12.005 ↗
12. S.S. Kim, J.T. Burns, and R.P. Gangloff: Eng. Fract. Mech., in press.
13. S.A. Barter, P.K. Sharp, G. Holden, and G. Clark: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 111–25.10.1046/j.1460-2695.2002.00482.x ↗
14. E.A. DeBartolo and B.M. Hillberry: Int. J. Fatigue, 2001, vol. 23, pp. S79–S86.10.1016/S0142-1123(01)00122-0 ↗
15. B. Skallerud: Eng. Fract. Mech., 1993, vol. 44, pp. 857–74.10.1016/0013-7944(93)90108-5 ↗
16. P.C. Paris and F. Erdogan: J. Basic Eng. Trans. ASME, 1963, vol. 85 (D), pp. 528–34.10.1115/1.3656900 ↗
17. W. Elber: Eng. Fract. Mech., 1970, vol. 2, pp. 37–45.10.1016/0013-7944(70)90028-7 ↗
18. J.C. Newman, Jr.: Int. J. Fract., 1984, vol. 24, pp. 131–35.10.1007/BF00032686 ↗
19. Y. Murakami and M. Endo: Fatigue, 1994, vol. 16, pp. 163–82.10.1016/0142-1123(94)90001-9 ↗
20. Q.G. Wang and P.E. Jones: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 615–21.10.1007/s11663-007-9051-4 ↗
21. S. Savelli, J.-Y. Buffière, and R. Fougeres: Mater. Sci. Forum, 2000, vols. 331–337, pp. 197–202.10.4028/www.scientific.net/MSF.331-337.197 ↗
22. N.E. Frost and D.S. Dugdale: J. Mech. Phys. Solids, 1958, vol. 6, pp. 99–110.10.1016/0022-3697(58)90225-7 ↗
23. H. Nisitani, M. Goto, and N. Kawagoishi: Eng. Fract. Mech., 1992, vol. 41, pp. 499–513.10.1016/0013-7944(92)90297-R ↗
24. J.F. Knott, P. Bowen, J. Luo, H. Jiang, and H.L. Sun: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1401–12.10.4028/www.scientific.net/MSF.331-337.1401 ↗
25. D.L. McDowell, K. Gall, M.F. Horstemeyer, and J. Fan: Eng. Fract. Mech., 2003, vol. 70, pp. 49–80.10.1016/S0013-7944(02)00021-8 ↗
26. J.Z. Yi, T.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1879–90.10.1007/s11661-003-0153-6 ↗
27. “ASTM E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2002 vol. 03.01, pp. 505–09.
28. “ASTM E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2002 vol. 03.01, pp. 603–44.
29. J.A. Harter: AFGROW Users’ Guide and Technical Manual, U.S. Air Force Research Laboratory, WPAFB, OH, 2006.
30. Y.X. Gao, J.Z. Yi, P.D. Lee, and T.C. Lindley: Fatigue Fract. Eng. Mater. Struct., 2004, vol. 27, pp. 559–70.10.1111/j.1460-2695.2004.00780.x ↗
31. M.J. Caton: Doctoral Thesis, University of Michigan, Ann Arbor, MI, 2001.
32. Q.G. Wang, C.J. Davidson, J.R. Griffiths, and P.N. Crepeau: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 887–95.10.1007/BF02735010 ↗
33. H. Mayer, M. Papakyriacou, B. Zettl, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 245–56.10.1016/S0142-1123(02)00054-3 ↗
34. K. Gall, N. Yang, M. Horstemeyer, D.L. McDowell, and J. Fan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3079–88.10.1007/s11661-999-0218-2 ↗
35. K. Gall, N. Yang, M. Horstemeyer, D.L. McDowell, and J. Fan: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 23, pp. 159–72.10.1046/j.1460-2695.2000.00239.x ↗
36. R.G. Forman, and V. Shivakumar: ASTM STP 905: Fracture Mechanics, 1986, vol. 17, pp. 59–74.
37. J.C. Newman, Jr., E.P. Phillips, and M.H. Swain: NASA Technical Memorandum 110307, Langley Research Center, Springfield, VA, 1997.