journal article·2015-12

The Portevin-Le Chatelier Effect in the Ni-Based Superalloy IN100

Patxi Fernandez-Zelaia, Benjamin S. Adair, Vincent M. Barker, Stephen D. Antolovich

Publisher page

Abstract

The Portevin-Le Chatelier (PLC) effect has been studied in the Ni-based superalloy IN100 which is currently used as a disk material in jet engines. A series of tensile tests was carried out at 588 K, 755 K, and 922 K (315 °C, 482 °C, and 649 °C) at plastic strain rates ranging from a low of 6.21 × 10−6 s−1 to a high of 4.92 × 10−2 s−1. The activation energy was determined using the slope of a line on a strain rate/temperature graph which divided the area of the graph into two regions: (1) “PLC behavior observed,” and (2) “No PLC behavior observed.” A new statistical approach was developed to objectively differentiate between a true PLC effect and experimental uncertainty (i.e., “noise”). The value of the activation energy was found to be 1.14 eV/atom, which strongly suggests that the rate controlling process was bulk diffusion of C in the lattice. A qualitative model, based on the Orowan equation and slip band dislocation mechanics, was proposed, which unifies the seemingly disparate ideas of the process being controlled by a single atom/dislocation interaction while at the same time exhibiting significant strains during PLC load drops.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Portevin et François Le Chatelier: Sur un Phénomène Observé lors de l’Essai de Traction d’Alliages en Cours de Transformation, Comptes Rendus de l’Académie des Sciences (CRAS), vol. 176, 1923, pp. 507–10.
2. Matthew Wagenhofer, MarjorieAnn Erickson-Natishan, Ronald W. Armstrong, and Frank J. Zerilli: Scripta Mater., vol. 41, 1999, pp. 1177–84.10.1016/S1359-6462(99)00265-1 ↗
3. R. A. Mulford and U. F. Kocks: Acta Met., vol. 27, 1979, pp. 1125–34.10.1016/0001-6160(79)90130-5 ↗
4. R.K. Ham and G. Jaffrey: Phil. Mag., vol. 15, 1967, pp. 247–56.10.1080/14786436708227697 ↗
5. C. Fressengeas, A. Beaudoin, M. Lebyodkin, L. Kubin, Y. Estrin: Mater. Sci. Eng. vol. 400, 2005, pp. 226–30.10.1016/j.msea.2005.02.073 ↗
6. M. Mazière, J. Besson, S. Forest, B. Tanguy, H. Chalons, and F. Vogel: Comput. Methods Appl. Mech. Eng., vol. 199, 2010, pp. 734–54.10.1016/j.cma.2009.11.004 ↗
7. Kok S, Beaudoin AJ, Tortorelli DA, Lebyodkin M (2002) Modell. Simul. Mater. Sci. Eng., 10:745–6310.1088/0965-0393/10/6/309 ↗
8. R.W. Hayes and C.W. Hayes: Acta Metall., vol. 30, 1982, pp. 1295–1301.10.1016/0001-6160(82)90148-1 ↗
9. V. Barker: MS Thesis, Georgia Institute of Technology, May, 2011.
10. K. Gopinath, A.K. Gogia, S.V. Kamat, and U. Ramamurty: Acta Mater., vol. 57, 2009, pp. 1243–53.10.1016/j.actamat.2008.11.005 ↗
11. C. Cornet, K. Wackermann, C. Stocker, H.-J. Christ, C. Lupton, M. Hardy, and J. Tong: Mater. High Temp., vol. 31, 2014 pp. 226–32.10.1179/1878641314Y.0000000018 ↗
12. C.Y. Cui, C.G. Tian, Y.Z. Zhou, T. Jin and X.F. Sun: in Superalloys 2012, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., AIME, Warrendale, PA, 2012, pp. 715–22
13. V. Garat, J-M. Cloue, B. Viguier, and E. Andrieu: in Superalloys 718, 625, 706 and Derivatives 2005, E.A. Loria ed., AIME, Warrendale, PA, 2015, pp. 551–57.10.7449/2005/Superalloys_2005_551_557 ↗
14. E. Orowan: Proc. Phys. Soc., vol. 52, 1940, pp. 8–22.10.1088/0959-5309/52/1/303 ↗
15. D.F. Stein and J.R. Low: J. Appl. Phys., vol. 31, 1960, pp. 362–6910.1063/1.1735574 ↗
16. J. Johnson and J. Gilman: J. Appl. Phys., vol. 30, 1959, pp. 129–44.10.1063/1.1735121 ↗
17. D. Hull and D.J. Bacon: Introduction to Dislocations, 3rd ed. Pergamon Press, Oxford, 1983, p. 57.
18. Peter Van Liempt and Jilt Sietsma: Metall. Mater. Trans. A, vol. 42A, 2011, pp 4008–14.10.1007/s11661-011-0850-5 ↗
19. P. G. McCormick: Acta. Met., vol. 36, 1988, pp. 3061–67.10.1016/0001-6160(88)90043-0 ↗
20. L. Fournier, D. Delafosse, T. Magnin: Mater. Sci. Eng., vol. A316, 2001, pp. 166–73.10.1016/S0921-5093(01)01224-2 ↗
21. A.W. McReynolds: Trans. TMS-AIME, vol. 185, 1949, pp. 32–45.
22. T.E. Moss and G.S. Was: Metall. Mater. Trans. A, vol. 43, 2012, pp. 3428–32.10.1007/s11661-012-1335-x ↗
23. P.L. Gruzin, Yu. A. Polikarpov, and G.B. Fedorov: Phys. Met. Metallogr., vol. 4, 1957, pp. 74–80.
24. R. P. Smith: Trans. TMS-AIME, vol. 236, 1966, pp. 1224–27.
25. S. Diamond and C. Wert: Trans. TMS-AIME, vol. 239, 1967, pp. 705–09.
26. Y. Nakada and A. S. Keh: Acta. Met., vol. 18, 1970, pp. 437–43.10.1016/0001-6160(70)90129-X ↗
27. A. Seeger: in Dislocations and Mechanical Properties of Crystals, J.C. Fisher, W.G. Johnston, R. Thomson, and T. Vreeland, Jr., eds., Wiley, New, York, 1957, pp. 243–32.
28. H. Conrad: J. Metals, vol. 16, 1964, pp. 582–88.
29. Frank J. Zerilli and Ronald W. Armstrong: J. Appl. Phys., 1987, vol. 61, pp. 1816–25.10.1063/1.338024 ↗
30. F.J. Zerilli: Metall. Mater. Trans A, vol. 35A, 2004, pp. 2547–55.10.1007/s11661-004-0201-x ↗
31. R.W. Armstrong: J. Sci. Ind. Res., vol. 32, 1973, pp. 591–98.
32. R. W. Armstrong and S. M. Walley: Int. Mater. Rev., vol. 53, 2008, pp. 105–28.10.1179/174328008X277795 ↗
33. R.W. Armstrong, W. Arnold, and F.J. Zerilli: J. Appl. Phys., 2009, vol. 105, art id. 023511.10.1063/1.3067764 ↗
34. Stephen D. Antolovich and Ronald W. Armstrong: Prog. Mater. Sci. vol. 59, 2014, pp. 1–160.10.1016/j.pmatsci.2013.06.001 ↗
35. A.H. Cottrell: Prog. Met. Phys., vol. 1, 1949, pp. 77–126.10.1016/0502-8205(49)90004-0 ↗