Multidimensional Study on Spall Behavior of High-Purity Copper Under Sliding Detonation
Source abstract
Abstract
The spall behaviors of high-purity copper samples with different heat treatment histories were investigated using optical microscopy and X-ray computer tomography (XRCT). The spall samples were obtained by sliding detonation experiments at low pressures (2 to 4 GPa). It was found that the spall planes created by sliding detonation in this experiment are similar to the spall planes created by plate impact test, except for more secondary damage residual around the main spall plane. The results of damage degree, the shape, and the distributions of voids obtained by the means of metallography (2D) and XRCT (3D) statistics were consistent. For similar microstructure, the maximum damage degree and damage zone width increase with increasing shock stress. Whereas the ranges of voids distribution parallel to the shock stress direction decreases with the increasing of shock stress. For the shock stress is similar, the shape of voids in annealed samples are closed to spheres, their mean flatness is 0.51. The voids in samples with thermo-mechanical treatment histories are sheet like with mean flatness 0.16. The difference in grain size (40 and 9 μm) may be the main reason of such difference.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. D. R. Curran, L. Seaman, and D.A. Shockey: Phys. Rep., 1897, vol. 147, pp. 253–388.10.1016/0370-1573(87)90049-4 ↗
2. M.A. Meyers: Dynamic Behavior of Materials, Wiley, New York, 1994.10.1002/9780470172278 ↗
3. T.H. Antoun, L. Seaman, D.R. Curran., et al: Spall fracture [M], Springer, New York, 2003.
4. N. A. Pedrazas, D.L. Worthington: Materials Science and Engineering A, 2012, vol. 536, pp. 117– 123.10.1016/j.msea.2011.12.083 ↗
5. C.S. Montross, T. Wei: International Journal of Fatigue.2002, vol. 24, pp. 1021–1036.10.1016/S0142-1123(02)00022-1 ↗
6. Y. G. Wang, M. L. Qi: Mechanics of Materials, 2014, vol. 69, pp. 270–279.10.1016/j.mechmat.2013.11.005 ↗
7. J. P. Escobedo, D. Dennis-Koller, E.K. Cerreta: J. Appl. Phys., 2011, vol. 110, p.033513.10.1063/1.3607294 ↗
8. J. P. Escobedo, E.K. Cerreta, D. Dennis-Koller: EPJ Web of Conferences, 2012, vol. 26, p. 02008.10.1051/epjconf/20122602008 ↗
9. S. J. Fensin, J.P. Escobedo: Acta Materialia, 2014, vol. 64, pp. 113–122.10.1016/j.actamat.2013.11.026 ↗
10. S. N. Luo, T. C. Germann, and D. L. Tonks: J. Appl. Phys, 2009, vol. 106, p. 123518.10.1063/1.3271414 ↗
11. A. Brown, K. Krishnan, L. Wayne, P. Peralta, S.N. Luo, D. Byler, and B. Patterson: ASME IMECE, San Diego, CA, 2013, p. 65642.
12. M. L. Qi, B. X. Bie: AIP Advances, 2014, vol. 4, p. 077118.10.1063/1.4890310 ↗
13. S. A. McDonald, M. Cotton: Journal of Physics: Conference Series500, 2014, p. 112045.10.1088/1742-6596/500/11/112045 ↗
14. B.M. Patterson, J.P. Escobedo: Microsc Microanal, 2012, vol. 18, pp. 390–98.10.1017/S1431927611012554 ↗
15. C. Gupta, H. Toda: Materials Science & Engineering A, 2013, vol. 564, pp. 525–538.10.1016/j.msea.2012.12.002 ↗
16. H. Toda and H. Oogo: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 765–76.10.1007/s11661-013-2013-3 ↗
17. Isaac, F. Sket,: Materials Science and Engineering A, 2008, vol. 478, pp. 108–118.10.1016/j.msea.2007.05.108 ↗
18. E. Maire, O. Bouaziz: Acta Materialia, 2008, vol. 56, pp. 4954–4964.10.1016/j.actamat.2008.06.015 ↗
19. O.B. Drennov and A.L. Mikhailov: Combust. Expl., Shock Waves, 1979, vol. 15, pp.539–542.10.1007/BF00743138 ↗
20. R.S. Hixson and G.T. Gray: AIP Conf. Proc., 2004, vol. 706.10.1063/1.1780279 ↗
21. D. D. Koller, R. S. Hixson: J. Appl. Phys., 2005, vol. 98, p. 103518.10.1063/1.2128493 ↗
22. G.T. Gray III, N K Bourne: Journal of Physics: Conference Series, 500, 2014, p. 112031.10.1088/1742-6596/500/11/112031 ↗
23. R.W. Minich and J.U. Cazamias: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2663-73.10.1007/s11661-004-0212-7 ↗
24. Meilan Qi, Chao Luo: Journal of Applied Physics, 2012, vol. 111, p.043506.10.1063/1.3681301 ↗
25. A.D. Brown and L. Wayne: Unpublished research, 2014.
26. A. L. Stevens, L. Davidson: Appl. Phys., 1972, vol. 43, pp. 4922–27.10.1063/1.1661046 ↗