journal article·2016-03

Solidification Sequence and Evolution of Microstructure During Rheocasting of Four Al-Si-Mg-Fe Alloys with Low Si Content

Mostafa Payandeh, Anders E. W. Jarfors, Magnus Wessén

Publisher page

Abstract

Four Al-Si-Mg-Fe alloys with Si contents varying from 1.6 to 4.5 wt pct were rheocast, using the RheoMetal™ process to prepare slurry and cast in a vertical high-pressure die casting machine. Particle size and Si concentration in the α-Al particles in the slurry and in the as-rheocast component were investigated. A uniform distribution of Si in the globular α 1-Al particles was achieved in the slurry. In the rheocast samples, measurement of the α 1-Al particles showed that these particles did not increase significantly in size during pouring and secondary solidification. The two additional α-Al particles types, α 2-Al particles and α 3-Al particles, were identified as being a result of two discrete nucleation events taking place after slurry production. The Si concentration in the α 2-Al and α 3-Al particles indicated that the larger α 2-Al particles precipitated before the α 3-Al particles. In addition, in the as-rheocast condition, the Si distribution inside the α 1-Al particles showed three distinct zones; an unaffected zone, a transition zone, and in some cases the start of a dendritic/cellular zone. The phenomenon of dendritic growth of globular α 1-Al particles during secondary solidification occurred concomitantly with the final eutectic reaction and increased with increasing amount of the Al-Si eutectic phase.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Kaufman JG, Rooy EL (2004) Aluminum alloy castings: properties, processes, and applications. ASM International, Material Park, pp. 7-6710.31399/asm.tb.aacppa.t51140007 ↗
2. S. Otarawanna, C.M. Gourlay, H.I. Laukli and A.K. Dahle: Trans. Indian. Inst. Met., 2009, vol. 62, pp. 499-503.10.1007/s12666-009-0081-2 ↗
3. Vinarcik EJ (2003) High integrity die casting processes, 1st edn, Wiley, New York, pp. 13-24
4. D.H. Kirkwood, M. Suéry, P. Kapranos, H.V. Atkinson and K. Young: Semi-solid Processing of Alloys, Springer, New York, NY, 2010, pp.109-127.10.1007/978-3-642-00706-4 ↗
5. M.C. Flemings, R.G. Riek and K.P. Young: Mater. Sci. Eng., 1976, vol. 25, pp. 103-17.10.1016/0025-5416(76)90057-4 ↗
6. T. Li, X. Lin and W. Huang: Acta Mater., 2006, vol. 54, pp. 4815-24.10.1016/j.actamat.2006.06.013 ↗
7. M. Hitchcock, Y. Wang and Z. Fan: Acta Mater., 2007, vol. 55, pp. 1589-98.10.1016/j.actamat.2006.10.018 ↗
8. O. Lashkari and R. Ghomashchi: J. Mater. Process. Technol., 2007, vol. 182, pp. 229-40.10.1016/j.jmatprotec.2006.08.003 ↗
9. A.K. Dahle and D.H. StJohn: Acta Mater., 1999, vol. 47, pp. 31-41.10.1016/S1359-6454(98)00342-5 ↗
10. O. Lashkari and R. Ghomashchi: Can. Metall. Q., 2014, vol. 53, pp. 47-54.10.1179/1879139513Y.0000000094 ↗
11. P. Das, S. Dutta and S.K. Samanta: Inst. Mech. Eng. Part B,, 2013, vol. 227, pp. 1474-83.10.1177/0954405413490162 ↗
12. J. Wang, P. Li, G. Mi and Y. Zhong: J. Mater. Process. Technol., 2010, vol. 210, pp. 1652-59.10.1016/j.jmatprotec.2010.05.016 ↗
13. S. Nafisi and R. Ghomashchi: JOM, 2006, vol. 58, pp. 24-30.10.1007/s11837-006-0175-9 ↗
14. Guo H, Yang X, Hu B (2008) J. Wuhan Univ. Technol. Mater. Sci. Ed. 23:54-59.10.1007/s11595-006-1054-5 ↗
15. 15. S. Thanabumrungkul, S. Janudom, R. Burapa, P. Dulyapraphant and J. Wannasin: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. s1016-s21.10.1016/S1003-6326(10)60623-1 ↗
16. Guo H, Yang X, Hu B (2007) J. Wuhan Univ. Technol. Mater. Sci. Ed. 22:590-595.10.1007/s11595-006-4590-0 ↗
17. J. Wannasin, R.A. Martinez and M.C. Flemings: Solid State Phenom., 2006, vols. 116-117, pp. 366-69.10.4028/www.scientific.net/SSP.116-117.366 ↗
18. M. Wessén and H. Cao: A Method of and a Device for Producing a Liquid-Solid Metal Composition, WO Patent, WO/2006/062,482.
19. 19. M. Payandeh, A.E.W. Jarfors and M. Wessén: Solid State Phenom., 2013, vol.192, pp. 392-97.
20. A. Jain, L. Ratke and A. Sharma: Trans. Indian. Inst. Met., 2012, vol. 65, pp. 545-51.10.1007/s12666-012-0179-9 ↗
21. O. Granath, M. Wessén and H. Cao: Int. J. Cast Met. Res., 2008, vol. 21, pp. 349-56.10.1179/136404608X320706 ↗
22. K. Geels: Metallographic and materialographic specimen preparation, light microscopy, image analysis, and hardness testing. ASTM International, West Conshohocken, PA, 2007, pp. 179-61110.1520/MNL46-EB ↗
23. B. Sundman, B. Jansson and J.O. Andersson: Calphad, 1985, vol. 9, pp. 153-90.10.1016/0364-5916(85)90021-5 ↗
24. J.O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman: Calphad, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
25. H.I. Laukli, C. M. Gourlay and A.K. Dahle: Metall. Mater. Trans. A, 2005, vol. 36, pp. 805-18.10.1007/s11661-005-1011-5 ↗
26. M.P. De Cicco, L. Turng, X. Li, and J.H. Perepezko: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2323–3010.1007/s11661-011-0607-1 ↗
27. 27. H. Fredriksson and U. Åkerlind: Solidification and Crystallization Processing in Metals and Alloys, Wiley, New York, 2012, pp. 179-8210.1002/9781119975540 ↗
28. 28. Z. Jian, K. Kuribayashi and W. Jie: Mat. Trans., 2002, vol. 43, pp. 721-26.10.2320/matertrans.43.721 ↗
29. J. Campbell: Complete Casting Handbook: Metal Casting Processes, Techniques and Design, Elsevier, Oxford, U.K., 2011, pp 19-104.10.1016/B978-1-85617-809-9.10002-7 ↗
30. J.A. Bailey and J.H. Tundermann, Transactions of the Metallurgical Society of AIME., 1966, vol. 236, pp. 1031-35.
31. A.E.W Jarfors, Int. J. Cast Met. Res., 2004, vol. 17, pp. 229-37.10.1179/136404604225020597 ↗
32. 32. J. Crank: The Mathematics of Diffusion., Oxford University Press, New York, 1975.
33. 33. S. Fujikawa, K. Hirano and Y. Fukushima, Metall. Trans. A, 1978, vol. 9A, pp. 1811-1510.1007/BF02663412 ↗
34. 34. S. Shin, E. Kim, G. Yeom and J. Lee, Mater. Sci. Eng., A,, 2012, vol. 532, pp. 151-57.10.1016/j.msea.2011.10.076 ↗